New method for comprehensive detection of chemical warfare agents using an electron-cyclotron-resonance ion-source mass spectrometer

We developed a detection technology for vapor forms of chemical warfare agents (CWAs) with an element analysis system using an electron cyclotron resonance ion source. After the vapor sample was introduced directly into the ion source, the molecular material was decomposed into elements using electron cyclotron resonance plasma and ionized. The following CWAs and stimulants were examined: diisopropyl fluorophosphonate (DFP), 2-chloroethylethylsulfide (2CEES), cyanogen chloride (CNCl), and hydrogen cyanide (HCN). The type of chemical warfare agents, specifically, whether it was a nerve agent, blister agent, blood agent, or choking agent, could be determined by measuring the quantities of the monatomic ions or CN(+) using mass spectrometry. It was possible to detect gaseous CWAs that could not be detected by a conventional mass spectrometer. The distribution of electron temperature in the plasma could be closely controlled by adjusting the input power of the microwaves used to generate the electron cyclotron resonance plasma, and the target compounds could be detected as molecular ions or fragment ions, enabling identification of the target agents.     

Hierarchical micro/nano structures of carbon composites as anodes for microbial fuel cells

We demonstrate the utility of hierarchical micro/nano structures of electrically conductive carbon composites as anodes for microbial fuel cells (MFCs). To construct the hierarchical structures, carbon nanotubes (CNTs) were directly grown on micro-porous graphite felts at high densities. Using the CNT-modified felts as anodes, power outputs from MFCs were increased ～7 fold compared to those with bare graphite-felt anodes. We also show that this power improvement is sustainable even in MFCs operated with naturally occurring microbial communities. These results suggest the wide utility of the hierarchical micro/nano structures of conductive carbon composites for bio-electrochemical processes.     

Mechanism of enhancement in absorbance of vibrational bands of adsorbates at a metal mesh with subwavelength hole arrays

We have investigated the mechanism of enhanced absorption intensities of vibrational bands of adsorbates on copper meshes with subwavelength holes by measuring and simulating temporal profiles of infrared pulses transmitted through the meshes. As reported previously [Williams et al., J. Phys. Chem. B, 2003, 107, 11871], the absorption intensities of CH stretching bands of alkanethiolate adsorbed on the mesh increase substantially with decreasing hole size. The enhancements of absorption intensities are associated with temporal delays of infrared pulses transmitted through the mesh. Finite difference time domain calculations reproduce the observed pulse delays as a function of hole size. These facts indicate that the delays of transmitted pulses are not caused by coupling of infrared radiation to surface plasmon polaritons propagating on the front and rear surfaces of the mesh, but they are caused by the reduction in group velocity owing to coupling to waveguide modes of mesh holes. Consequently, the strong enhancements of the absorption intensities are attributed to adsorbates inside the holes rather than to those on the mesh surfaces that have been proposed previously.     

Photocatalytic reduction of nitrobenzenes to aminobenzenes in aqueous suspensions of titanium(IV) oxide in the presence of hole scavengers under deaerated and aerated conditions

Photocatalytic reduction of nitrobenzenes to corresponding aminobenzenes in aqueous suspensions of titanium(IV) oxide (TiO(2)) containing hole scavengers under various conditions was examined. In photocatalytic reduction of m-nitrobenzenesulfonic acid (m-NBS) in the presence of formic acid (FA) under deaerated conditions, m-aminobenzenesulfonic acid (m-ABS) was produced almost quantitatively in acidic suspensions and high efficiency (>99%) in FA utilization as a hole scavenger was achieved. No re-oxidation of m-ABS occurred in acidic conditions both in the presence and absence of FA. The high yield of m-ABS was explained by strong ability of FA as a hole scavenger and possible repulsion of the reduced functional group (ammonium group, -NH(3)(+)) from the protonated, i.e., positively charged TiO(2) surface in acidic suspensions avoiding re-oxidation of m-ABS. Using TiO(2) samples of various physical properties, which had been synthesized by a solvothermal method and post-calcination at various temperatures, effects of physical properties of the TiO(2) samples on m-ABS yield were also investigated. A linear correlation between the amount of m-NBS adsorbed and the m-ABS yield was observed, suggesting that ability of TiO(2) for m-NBS adsorption is one of the key factors for effective photocatalytic reduction of m-NBS to m-ABS. This photocatalytic system can be applied for reduction of aminonitrobenzenes to corresponding diaminobenzenes (DAB) in the presence of oxalic acid as a hole scavenger. High yields of m-ABS and DAB were achieved even when the reactions were performed in the presence of oxygen.     

Molecular probe for a fluorous medium: long-lived phosphorescence of alpha-diketones in perfluoromethylcyclohexane at room temperature.

We found that alpha-diketones (2,3-butanedione (BD) and 1-phenyl-1,2-propanedione (PPD)) were very suitable luminescence probes for studying the properties of a perfluorinated solvent (i.e., fluorous solvent; perfluoromethylcyclohexane (PFMC)), since these compounds were soluble in PFMC and showed long-lived phosphorescence even at room temperature. The phosphorescence lifetime (tau(p)) of BD in PFMC (650 micros) was much longer than that in cyclohexane (CH, 270 micros). The longer tau(p) value of BD in PFMC was ascribed to the variation of the intersystem crossing rate constant (k(isc)) from the excited triplet state (T1) to the ground state (S0) with the solvent. Some possible reasons for the change in k(isc) were discussed in terms of solute-solvent interactions. Furthermore, by utilizing phosphorescence quenching of BD by pyrene, we, determined a rate constant of the diffusion-controlled reaction in PFMC. Characteristic behaviors of mixing/separation processes between PFMC and a common organic solvent observed by Schlieren photographs were also reported.     

Studies on thermal degradation of acrylonitrile–butadiene–styrene copolymer (ABS-Br) containing brominated flame retardant

The thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-Br; 10 g) containing brominated flame retardant (Br: 9.59 wt.%) was carried out at 450 °C using a semi batch operation using two different temperature programs. The heating rate was found to affect the quality of the degradation oil and yield of products (liquid, gas and residue). Data on the effect of the temperature program on the accumulation of liquid products was presented. It was found that the majority of the bromine was concentrated in the carbon residue and while majority of the nitrogen accumulates in the liquid products irrespective of degradation mode. The use of a one step constant heating rate process (I) produced a higher liquid yield (39%), than a two step process (29%). Differences were also noted in the Br and N contained in the liquids produced by the two processes.     

A novel cyclic dithiocarbonate having siloxane moiety; Approach to curable siloxane oligomer

A novel 5‐membered cyclic dithiocarbonate (DTC) having a siloxane moiety, 5‐(3‐trimethoxysilylpropyloxymethyl)‐1,3‐oxathiolane‐2‐thione, was synthesized from the corresponding epoxide precursor by its cycloaddition with carbon disulfide. The siloxane group underwent condensation reaction by the treatment with water and a basic or acidic catalyst, to afford the corresponding oligomer having siloxane main chain and DTC pendant. The resulting oligomer was liquid and soluble in organic solvents such as THF and chloroform. Treatment of the oligomer with amines resulted in selective ring‐opening reaction of the DTC group, generating a thiol group, which underwent oxidative coupling reaction to make the oligomer successfully cured. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4422–4430, 2005     

K1 of Some Non-Commutative Completed Group Rings

We compute K₁ of completed group rings of some two dimensional p-adic Lie groups. Dedicated to Professor Spencer Bloch on his sixtieth birthday