Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

Dependence of selective enclathration on types of cholic acid crystals

Competitive recrystallizations of cholic acid (CA) from 1:1 binary mixtures of seven mono-substituted benzenes are demonstrated. The order of preference for guests to be incorporated into the cholic acid crystals are as follows: benzene, toluene > n-amylbenzene, n-hexylbenzene > ethylbenzene, n-propylbenzene, n-butylbenzene. These seven compounds afford bilayer type inclusion crystals that are classified into four types based on the host frameworks and host-guest stoichiometries. The order of selective enclathration corresponds to the four types as follows: 1:1 alpha G > 2:1 alpha G > 1:1 beta T or 2:1 alpha T. The preference for the alpha G type was also confirmed by investigating the host frameworks of the crystals obtained from binary mixtures. The dependence of the selectivity on the different types of CA crystals can be understood in terms of the fit of the guest molecule in the host cavity.     

Phase Separation in Methylsiloxane Sol-Gel Systems in a Small Confined Space

The organo-siloxane gel with co-continuous structure derived from methyltrimethoxysilane (MTMS) was synthesized in a confined space between parallel plates by inducing spinodal decomposition during sol-gel transition. The resultant gel morphology was 3-dimensionally observed by laser scanning confocal microscopy (LSCM). The sliced LSCM photographs revealed that the confined gels have inhomogeneity perpendicular to the plate, exhibiting a layered structure. The layered structure can be divided into three regions according to their morphology; interface, near-surface layer, bulk phase. The organo-siloxane depletion layer had formed in the vicinity of both hydrophobic and hydrophilic plates, and the bulk phase had formed slight away from the plates exhibited co-continuous structure. In addition, the confined gels exhibited no shrinkage during drying process that resulted in the larger domain size compared to the monolithic gel. The attractive interaction between the plates and the resultant organo-siloxane phase accounts for the inhibition of shrinkage of confined gels.     

Highly Selective Separation of Rhodopsin from Bovine Rod Outer Segment Membranes Using Combination of Divalent Cation and Alkyl(thio)glucoside

The micellization process of bovine rod outer segment (ROS) membranes is investigated utilizing a series of neutral detergents. It is found that when alkyl(thio)glucosides with an appropriate hydrophilic–lipophilic balance (e.g. octylthioglucoside) are used in combination with a divalent cation, rhodopsin is selectively extracted from ROS membranes at a specific detergent-to-membrane ratio. This allows remarkable purification of rhodopsin by a single-step solubilization, because the residual membranes are heavily aggregated in the presence of divalent cation and are therefore easily sedimented by low-speed centrifugation. The absorption spectrum of the supernatant reproducibly exhibits an A₂₈₀/A₅₀₀ value of 1.6, an excellent value that could rarely be obtained by chromatographic purification. The degree of purification also depends on the type of divalent cation included in the solubilization solution; specific binding of IIB-series cations (Zn²⁺ and Cd²⁺) to ROS membranes is suggested to play an important role in the solubilization process. The present result represents a unique example of selective solubilization of a specific membrane protein from highly aggregated membranes.     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Thio-sugars. IV. Synthesis of carbohydrate 1,3-glycol (six-membered) thionocarbonates and their attempted O-S rearrangement

Four six-membered cyclic thionocarbonates (two sec-sec and two prim-sec) were prepared and their radical-promoted O-S rearrangement reaction was examined. The results revealed that the reaction in six-membered rings is difficult compared with the simple rearrangement in five-membered rings. In the course of syntheses of the substrates, interesting acyl migration during the stannylation process occurred.     

Selective foam separation of binary protein solution by SDS complexation method

A fundamental study about the selective foam separation of protein mixture was carried out. A solution containing two proteins, ovalbumin (OA) and lysozyme (LZ), and an anionic surfactant, sodium dodecyl sulfate (SDS), was adjusted to pH 6.0, which referred to an intermediate state between the isoelectric points of the proteins. The solution was processed by continuous foam separation. The results showed that a proper addition of SDS greatly improved the selective recovery of LZ to OA. The experimental data were well explained by a simple model that most of cationic protein molecules (LZ) are associated with SDS and the adsorption of all the species including LZ-SDS complexes are subjected to Langmuir adsorption isotherm. The results also showed that one of the Langmuir parameters, which means a kind of lyophillic property of adsorbed material, of LZ-SDS complexes was extremely large as compared with that of primary protein.     

Phase Separation in Sol-Gel System Containing Mixture of 3- and 4-Functional Alkoxysilanes

The phase separation behavior of gelling systems containing the mixture of 3-functional and 4-functional alkoxysilanes has been investigated. The relation between the starting composition and resultant macroporous morphology was examined using tetramethoxysilane (TMOS) and vinyltrimethoxysilane (VTMS) as starting alkoxysilanes, formamide (FA) as an additive, under an acidic condition. Up to TMOS:VTMS molar ratio of 0.5:0.5, the phase relation remained almost unchanged from that of pure TMOS system which exhibits morphology with well-defined co-continuous macropores in a very limited concentration region. On the VTMS-rich side typically TMOS:VTMS = 0.2:0.8, however, the co-continuous macroporous morphology was obtained in a broader composition range than those of either pure TMOS or VTMS system. A dome-like pseudo binary region was obtained with the two-phase region extending toward FA-rich direction. The domain size and pore volume of the gels with macroporous morphology could be controlled by alkoxide:water ratio and total solvent fraction, respectively.     

Crystal structures and topochemical polymerizations of 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes

Highly conjugated monomers, 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes (methoxy (1a), ethoxy (1b), isopropoxy (1c), benzyloxy (1d), chloroethoxy (1e), and bromoethoxy (1f)), were synthesized. Recrystallizations of 1a, 1c, 1e, and 1f yielded two crystal forms (prisms (1a-A) and needles (1a-B), needles (1c-A) and plates (1c-B), prisms (1e-A) and plates (1e-B), and prisms (1f-A) and needles (1f-B)), which have different molecular packing modes by X-ray crystal structure analysis, indicating that the crystals are polymorphic. In the photopolymerizations of these monomer crystals in the solid state, 1a-A, 1e-A, and 1f-A polymerized topochemically to give crystalline polymers. For their thermal polymerizations in the solid state, in addition to 1a-A, 1e-A, and 1f-A, 1e-B and 1f-B polymerized, but polymers formed from the 1e-B and 1f-B were amorphous. The packing of quinodimethane molecules in the crystals was defined by four kinds of parameters, stacking distance (d(s)), the distance between the reacting exomethylene carbon atoms (d(cc)), the angles formed between the stacking axis and longer axis of the monomer molecule (theta(1)), and the shorter axis of the monomer molecule (theta(2)), and then the polymerization reactivity of these quinodimethanes in the solid state was discussed on the basis of these parameters.