Photocatalytic Activity and Photo-Induced Wettability Conversion of TiO2 Thin Film Prepared by Sol-Gel Process on a Soda-Lime Glass

We have developed the transparent photoactive TiO₂ thin film coated on soda lime glass (SLG) by sol-gel process. Titanium dioxide thin films coated on SLG exhibit lower photocatalytic activity due to the thermal diffusion of Na ion from the SLG substrate. Thin SiO₂ film precoating is very effective to prevent the thermal diffusion of Na ion. We have evaluated the photocatalytic decomposition of gaseous acetaldehyde and the photo-induced surface wettability of TiO₂ films with and without SiO₂ precoating layer. As expected, the TiO₂ film on SiO₂/SLG is more photoactive to decompose acetaldehyde than that on SLG. However, as for wettability conversion, there was little difference in the conversion rate between TiO₂ film without SiO₂, and TiO₂ film with SiO₂. Different dependence of Na ion diffusion on two kinds of photo-induced reaction on TiO₂ is discussed based on the difference of the photo-induced reaction mechanism.     

Determination of elemental and ionic compositions for diesel exhaust particles by particle induced X-ray emission and ion chromatography analysis.

The purpose of this study is to clarify the chemical characterization of PM2.5 and PM10 in diesel exhaust particles (DEP). Sampling of PM2.5 and PM10 in DEP was carried out in November 1999 using an automobile exhaust testing system at the National Traffic Safety and Environment Laboratory, with a diesel truck (engine type: direct injection, displacement: 7,961 cc, carrying weight: 2,020 kg, equivalent inertia weight: 5,600 kg) placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km/h, M-15 test pattern and 60%-revolution/40%-load of maximum power. Samples were collected on a polycarbonate membrane filter (Nuclepore, pore size: 0.8 microm) using a MiniVol Portable Air Sampler (Airmetrics Co., Inc.). The concentrations of several elemental and ionic species in the PM2.5 and PM10 samples were determined by particle induced X-ray emission (PIXE) and ion chromatography analysis. PIXE analysis of the PM2.5 and PM10 samples revealed 15 elements, of which Na, Mg, Si, S, Cl, Ca, Fe and Zn were found to be the major components. Ionic species were Cl-, NO2-, NO3-, SO4(2-), Na+, NH4+, K+ and Ca2+. Concentrations of elements and ionic species under the sampling condition of 60%-revolution/40%-load were highest in comparison with those of the other sampling conditions. The elemental and ionic species data were compared for PM2.5 and PM10; PM2.5 concentrations were 70% or more of PM10 concentrations for the majority of elements, and concentrations of ionic species in PM2.5 and PM10 were almost identical.     

T-band phenomena in 183Re

Abstact: High-spin states in ¹⁸³Re have been studied using the ¹⁷⁶Yb(¹¹B,4n) reaction at 52 and 57 MeV. Two high-K bands have been observed directly by a time-correlated γ-γ coincidence measurement. One of the bands is built on an isomeric K ^π=(25/2)⁺ state at E _x= 1908 keV with a half-life of 0.82(2) ms. The other band, assigned as K ^π=(29/2)⁻ at E _x= 2739 keV, decays to the (25/2)⁺ band. These bands are interpreted as three-quasiparticle structures, π(5/2)⁺[402] &⊗ν(9/2)⁺[624] ⊗ν(11/2)⁺[615] for the (25/2)⁺ band and π(9/2)⁻[514] ⊗ν(9/2)⁺[624] ⊗ν(11/2)⁺[615] for the (29/2)⁻ band. The K ^π= (29/2)⁻ band becomes strongly Coriolis mixed with increasing spin and is gradually changing into a low-K s-band structure. Received: 20 April 1998     

Large signal analysis of phase variations and bistability in degenerate four-wave mixing

Optical and Quantum Electronics -     

Initial growth process and surface structure of Ag on Si(111) studied by low-energy Ion-Scattering Spectroscopy (ISS) and LEED-AES

The growth process of silver on a Si(111) substrate has been studied in detail by low-energy ion-scattering spectroscopy (ISS) combined with LEED-AES. Neon ions of 500 eV were used as probe ions of ISS. The ISS experiments have revealed that the growth at room temperature and at high temperature are quite different from each other even in the submonolayer coverage range. The following growth models have been proposed for the respective temperatures. At room temperature, the deposited Ag forms a two-dimensional (2D) island at around 2/3 monolayer (ML) coverage, where the Ag atoms are packed commensurately with the Si(111)1 substrate. One third of the substrate Si surface remains uncovered there. Then it starts to develop into Ag crystal, and at a few ML coverage a 3D island of bulk Ag crystal grows directly on the substrate. An intermediate layer, which covers uniformly the whole surface before the growth of Ag crystal, does not exist. At high temperatures (>~200°C), the well-known Si(111)√3-Ag layer is formed as an intermediate layer, which consists of 2/3 ML of Ag atoms and covers the whole surface uniformly. These Ag atoms are embedded in the first double layer of the Si substrate. It is concluded that the formation of the √3 structure needs relatively high activation energy which may originate from the large displacement of Si atoms owing to the embedment of the Ag atoms, and does not proceed below about 200°C. The most stable state of the Ag atoms on the outermost Si layer is in the shape of an island, both for the Si(111) surface and for the Si(111)√3-Ag surface.     

Synthesis and Characterizations of Regioregular Poly(3‐alkylthiophene) with Alter1483ting Dodecyl/1H,1H,2H,2H‐Perfluorooctyl Side Chains

A regioregular poly[4′‐dodecyl‐3‐(1H,1H,2H,2H‐perfluorooctyl)‐2,2′‐bithiophene] (P3DDFT) with alternating alkyl and semifluoroalkyl side chains were synthesized. Short ethylene spacer between perfluorohexyl part and thiophene did not largely affect the absorption and emission properties of the polythiophene backbone in comparison with poly(3‐dodecylthiophene) (P3DDT). P3DDFT showed a larger onset of the oxidation potential (+0.17 V) observed by cyclic voltamogram due to the electron withdrawing effect of the fluoroalkyl part. Thermal analysis and X‐ray diffraction patterns indicated that P3DDFT in the solid state forms a semicrystalline lamellar structure that is similar to that of P3DDT. Ultraviolet photoemission spectroscopy was also used to investigate their electron structure in the films. Comparison of hole mobilities in the films suggested that P3DDFT could have a less ordered packing structure compared to P3DDT both in the bulk and at the dielectric interface.

     

Visible light-induced degradation of ethylene glycol on nitrogen-doped TiO2 powders

The photocatalytic degradation processes of ethylene glycol (EG) during the UV or visible light irradiation of pure anatase and nitrogen (N)-doped TiO2 powders (TiO(2-x)N(x), x = 0, 0.002, 0.003, and 0.007) were investigated using time-resolved diffuse reflectance (TDR) and solid-state NMR spectroscopies. The TDR spectra and time traces observed for the charge carriers indicated that the scavenging of photogenerated holes (h+) by EG occurred during the 355-nm laser photolysis of the N-doped TiO2 powders, while no direct oxidation reaction of EG by h+ occurred during the 460-nm laser photolysis, although the charge carriers were sufficiently generated upon excitation. The solid-state magic-angle spinning (MAS) NMR measurements revealed that EG is preferentially chemisorbed on the surface of the N-doped TiO2 powders, in contrast to the pure TiO2, and degrades under visible light irradiation.     

Oxygen isotope effect in optimally doped Bi2Sr2CaCu2O8+δ studied by low-energy ARPES

Using angle-resolved photoemission spectroscopy (ARPES) with low-energy tunable photons, we studied the oxygen isotope effect in optimally doped Bi₂Sr₂CaCu₂O_8+δ (Bi2212). We found the oxygen isotope shift in the real part of the electron self-energies [ReΣ(ω)s] along the nodal direction derived not only from the momentum distribution curves (MDCs) but also from the energy distribution curves (EDCs). Present results indicate straightforwardly the coupling between the nodal electrons and the phonons.