Proton transfer in nafion membrane by quantum chemistry calculation

We estimated the energy barriers of proton transfers in the systems of (CF₃SO₃/H/SO₃CF₃)⁻ and (CF₃SO₃/H/H₂O/SO₃CF₃)⁻ as models of a water-swollen Nafion membrane by an ab initio density functional quantum calculation method with consideration of the hydration effect. As a result, the proton transfer between the SO sites, which is accompanied by one water molecule, was found to be one of the proton-transfer mechanisms in the water-swollen Nafion membrane; that is, the surface diffusion mechanism was found to be important for the proton transfer in that membrane. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1905–1914, 2004     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.     

Synthesis and Rearrangement of P‐Nitroxyl‐Substituted PIII and PV Phosphanes: A Combined Experimental and Theoretical Case Study

Low‐temperature generation of P‐nitroxyl phosphane 2 (Ph₂POTEMP), which was obtained by the reaction of Ph₂PH ( 1 ) with two equivalents of TEMPO, is presented. Upon warming, phosphane 2 decomposed to give P‐nitroxyl phosphane P‐oxide 3 (Ph₂P(O)OTEMP) as one of the final products. This facile synthetic protocol also enabled access to P‐sulfide and P‐borane derivatives 7 and 13 , respectively, by using Ph₂P(S)H ( 6 ) or Ph₂P(BH₃)H ( 11 ) and TEMPO. Phosphane sulfide 7 revealed a rearrangement to phosphane oxide 8 (Ph₂P(O)STEMP) in CDCl₃ at ambient temperature, whereas in THF, thermal decomposition of sulfide 7 yielded salt 10 ([TEMP‐H₂][Ph₂P(S)O]). As well as EPR and detailed NMR kinetic studies, indepth theoretical studies provided an insight into the reaction pathways and spin‐density distributions of the reactive intermediates.     

Nickel metallisation of Si by dynamic ion-beam mixing

Abstract

Thin Ni films were prepared at room temperature by Ni metal vapour deposition and simultaneous irradiation by Ar ions with an energy of 2–20 keV. The reaction of Ni with Si during dynamic ion-beam mixing was studied. The fluences of the ion beam were 4.7 × 10¹⁷ and 8.9 × 10¹⁷ cm^?2, and arrival rate ratios Ni/Ar were 9.7 and 5.1. Concentration profiles of Ni, Si, C, and O were analysed with Auger electron spectroscopy; the surface morphology and the crystalline structure were investigated with a cross-sectional scanning electron microscope and X-ray diffractometry. The theoretical profiles were calculated with the dynamic Monte Carlo simulation T-DYN for comparison with the experimentally obtained profiles. It was possible to observe the ballistic mixing effects and also thermally activated formation of nickel silicide.     

Pulsed EPR Dipolar Spectroscopy under the Breakdown of the High-Field Approximation: The High-Spin Iron(III) Case

Pulsed EPR dipolar spectroscopy (PDS) offers several methods for measuring dipolar coupling and thus the distance between electron-spin centers. To date, PDS measurements to metal centers were limited to ions that adhere to the high-field approximation. Here, the PDS methodology is extended to cases where the high-field approximation breaks down on the example of the high-spin Fe³⁺/nitroxide spin-pair. First, the theory developed by Maryasov et al. (Appl. Magn. Reson. 2006 , 30, 683–702) was adapted to derive equations for the dipolar coupling constant, which revealed that the dipolar spectrum does not only depend on the length and orientation of the interspin distance vector with respect to the applied magnetic field but also on its orientation to the effective g-tensor of the Fe³⁺ ion. Then, it is shown on a model system and a heme protein that a PDS method called relaxation-induced dipolar modulation enhancement (RIDME) is well-suited to measuring such spectra and that the experimentally obtained dipolar spectra are in full agreement with the derived equations. Finally, a RIDME data analysis procedure was developed, which facilitates the determination of distance and angular distributions from the RIDME data. Thus, this study enables the application of PDS to for example, the highly relevant class of high-spin Fe³⁺ heme proteins.     

Biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) crosslinked by reversible Diels–Alder reaction

We synthesized biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) [P(FS‐co‐BS)] copolymers by polycondensation of 2,5‐bis(hydroxymethyl)furan, 1,4‐butanediol, and succinic acid. These copolymers could be crosslinked to form network polymers by means of a reversible Diels–Alder reaction with bis‐maleimide. The thermal properties, mechanical properties, and healing abilities of the P(FS‐co‐BS)s and the network polymers were investigated. The mechanical properties of the network polymers depended on the comonomer composition of the P(FS‐co‐BS)s and the maleimide/furan ratio in the network polymers. Some of the copolymers exhibited healing ability at room temperature, and their healing efficiency was enhanced by solvent or heat. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 216–222     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Highly Efficient α‐Sialylation by Virtue of Fixed Dipole Effects of N‐Phthalyl Group: Application to Continuous Flow Synthesis of α(2‐3)‐and α(2‐6)‐Neu5Ac‐Gal Motifs by Microreactor

Highly α‐selective sialylation of sialic acid N‐phenyltrifluoroacetimidate with various galactose and lactose acceptors has been achieved by introducing the C‐5 N‐phthalyl group on the donor. The “fixed dipole effect” of the N‐phthalyl group was proposed to explain the high reactivity and α‐selectivity. The microfluidic system was applied to the present α‐sialylation, which is amenable to large‐scale synthesis. The N‐phthalyl group was removed by treatment with methylhydrazine acetate, for which protocol can be readily applied to the synthesis of a variety of sialic acid‐containing oligosaccharides.      

Chiral Iodotriptycenes: Synthesis and Catalytic Applications

Invited for this month′s cover picture is the group of Thomas Wirth at Cardiff University (UK). The cover picture shows two structures of triptycenes. In each of these molecules all three aromatic rings are different with the rigid structure of the molecules making them chiral. The two sp³-carbons shown in red and green are the stereocentres with defined configuration. These molecules contain the crucial iodine functionality which are utilised to generate hypervalent iodine(III)-catalysts in situ . The authors acknowledge Dr. Yu Wang for the creation of the cover image. Read the full text of their Research Article at 10.1002/open.202200145 .     

Selective ablation of atherosclerotic lesions with less thermal damage by controlling the pulse structure of a quantum cascade laser in the 5.7-µm wavelength range

Cholesteryl esters are the main components of atherosclerotic plaques, and they have an absorption peak at the wavelength of 5.75 µm. To realize less-invasive ablation of the atherosclerotic plaques using a quasi-continuous wave (quasi-CW) quantum cascade laser (QCL), the thermal effects on normal vessels must be reduced. In this study, we attempted to reduce the thermal effects by controlling the pulse structure. The irradiation effects on rabbit atherosclerotic aortas using macro pulse irradiation (irradiation of pulses at intervals) and conventional quasi-CW irradiation were compared. The macro pulse width and the macro pulse interval were determined based on the thermal relaxation time of atherosclerotic and normal aortas in the oscillation wavelength of the QCL. The ablation depth increased and the coagulation width decreased using macro pulse irradiation. Moreover, difference in ablation depth between the atherosclerotic and normal rabbit aortas using macro pulse irradiation was confirmed. Therefore, the QCL in the 5.7-µm wavelength range with controlling the pulse structure was effective for less-invasive laser angioplasty.