Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

Determination of in vitro permeability of drug candidates through a caco-2 cell monolayer by liquid chromatography/tandem mass spectrometry

Studying the permeability of compounds across a Caco-2 cell monolayer is an established in vitro model to screen for oral absorption and to evaluate the mechanism of transport. This assay can also be used to evaluate compounds as potential P-glycoprotein substrates and/or inhibitors. The traditional methods of sample analysis (high-performance liquid chromatography (HPLC) with a UV or fluorescence detector) limit the throughput and sensitivity of this assay. Data are presented here describing the use of liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the analysis of samples derived from the Caco-2 cell studies. During the analysis an automatic switching valve was used to divert the flow from the HPLC column to waste for the first minute, preventing the early eluting salts from entering and contaminating the LC/MS interface. This approach allows the rapid and accurate determination of drug transport across the Caco-2 cell monolayer. The high sensitivity and specificity of LC/MS/MS make this technique an ideal candidate for the low concentration and high throughput routine analysis of Caco-2 cell solutions, especially if multiple compounds are administered and analyzed simultaneously. Thus, the use of LC/MS/MS will increase the value of the Caco-2 cell assay as an in vitro screening tool.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

MMI作为铜的盐酸酸洗缓蚀剂作用机理的研究

用失重法研究了N-甲基-2-巯基咪唑（MMI）在5％盐酸中对铜的酸洗缓蚀性能.探讨了温度和MMI浓度对缓蚀效果的影响，从中得出了MMI在铜表面的吸附等温式，计算了吸附热及MMI的加入对铜在盐酸中腐蚀反应活化能的影响，进而探讨了MMI对铜缓蚀作用的机理.结果表明， 30 ℃下，在5％盐酸中，当MMI的浓度在3 mmol•L－1和8 mmol•L－1之间时,缓蚀率随MMI浓度的增加而迅速增加，当浓度达到8 mmol•L－1时，缓蚀率趋于定值，而当浓度小于3 mmol•L－1时， MMI的加入会加速铜的腐蚀；吸附在铜表面的MMI分子间的作用力整体表现为引力； MMI在铜表面的吸附是吸热反应； MMI的加入降低了铜的腐蚀反应活化能.     

Y2O3和CeO2复合掺杂ZrO2纳米晶的制备与表征

以ZrOCl2.8H2O,Y2O3,Ce（NO3）3.5.5H2O为原料,NH3.H2O作沉淀剂,少量表面活性剂PE作分散剂,采用反向共沉淀-喷雾干燥法,结合物理、化学分散技术,成功地制备了Y2O3,CeO2复合掺杂ZrO2纳米粉末。通过DSC-TG,XRD,XPS,BET和SEM等方法对所制得粉末进行了表征。结果表明：以Ce0.1Y0.1Zr0.8O1.95化学计量比制备的多元氢氧化物胶体经过喷雾干燥处理后,在500℃基本完成水合氧化物的分解,577℃附近完成由非晶相向立方相的转变;经过580-1000℃煅烧后,CeO2和Y2O3已经完全固溶到ZrO2中,形成类质同相体,该粉末系列均属于立方相萤石结构;掺杂进入ZrO2晶格中的Ce呈＋4价形式存在;比表面积由22.0 m^2.g^-1（580℃煅烧）减至4.97 m^2.g^-1（1000℃煅烧）;SEM结果显示800℃煅烧的该粉末颗粒尺寸分布均匀,多呈类球状,且粒径在50-80 nm。     

N-Bromosuccinimide-dibenzoyl peroxide/azabisisobutyronitrile: a reagent for Z- to E-alkene isomerization

N-Bromosuccinimide-dibenzoyl peroxide/azobisisobutyronitrile is used to carry out several types of Z- to E-alkene isomerizations. The NBS-bromination conditions are sufficient for both allylic bromination and alkene isomerization. When the allylic hydrogens are not available in substrates, only the isomerization of the alkene takes place. The present conditions for isomerization of carbon-carbon double bonds are mild and efficient.     

Enthalpic interactions between some amino acids and cyclohexanone in aqueous solutions at 298.15 K

The enthalpies of mixing of glycine, l-α-alanine, l-γ-aminobutyric acid, l-α-valine, l-α-serine and l-α-threonine with cyclohexanone in aqueous solutions and their respective enthalpies of dilution have been measured by calorimetry at 298.15 K. Experimental enthalpies of dilution and mixing have been correlated with the virial expansion equation that was obtained with the McMillan-Mayer theory. The enthalpic interaction parameters h_xy, h_xxy and h_xyy of the amino acids studied with cyclohexanone in aqueous solutions have been evaluated, and the heterotactic enthalpic pair interaction coefficients (h_xy) are discussed in terms of solute-solute interactions.     

Highly sensitive voltammetric biosensor for nitric oxide based on its high affinity with hemoglobin

Although heme protein-based, amperometric nitric oxide (NO) biosensors have been well documented in previous studies, most have been conducted in anaerobic conditions. Herein we report a novel hemoglobin-based NO biosensor that is not only very sensitive but also usable in air. The heme protein was entrapped in a sodium montmorillonite film, which was immobilized at a pyrolytic graphite electrode surface. Film-entrapped hemoglobin can directly exchange electrons with the electrode, and this process has proven to favor the catalytic reduction of oxygen. In addition, NO induced a cathodic potential shift of the catalytic reduction peak of oxygen. This potential shift was proportional to the logarithm of NO concentration ranging from 4.0 × 10⁻¹¹ to 5.0 × 10⁻⁶ mol/L. The detection limit has been estimated to be 20 pM, approximately four orders lower than previously reported amperometric detectors.     

Order-disorder effects of small guests in clathrates studied by nuclear quadrupole resonance and crystallography. Part I. Carbon tetrachloride and related molecules in Ni(SCN)2(3-methylpyridine)4

NQR spectroscopy and X-ray crystallography have been jointly applied to the study of the small guest molecules CH₂Cl₂, CHCl₃, CCl₄, CBr₂Cl₂, C(CH₃)2Cl₂ etc. in the Werner host complex Ni(SCN)₂(3-methylpyridine)₄. Specific host-guest dipole-dipole interactions play an important role in order-disorder effects for guest molecules in the cavities of orthorhombic system,Fddd. Thus a weakly polar molecule such as CBr₂Cl₂ exhibits a disordered alternation, both the bromine and the chlorine atoms occupying the two possible sites in theC ₂ cavity, whereas for the polar molecule C(CH₃)₂Cl₂, an ordered structure is observed. In addition, two new types of crystal structures,C2/c andP , are reported here for dichloromethane and chloroform clathrates.