Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid

The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladium (II) acetate as a catalyst. The significant fluorescence at excitation maximum wavelength of 275–290 nm and emission maximum wavelength of 315–350 nm was detected in all the tested aryl bromides. This result demonstrated that non-fluorescent aryl bromides could be converted to the fluorescent biphenyl derivatives by the coupling reaction with non-fluorescent PBA. We tried to determine these aryl bromides by HPLC-fluorescence detection with pre-column derivatization. The aryl bromide derivatives were detected on the chromatogram within 30 min without any interfering peak derived from the reagent blank. The detection limits (S/N = 3) for aryl bromides were 13–157 fmol/injection.     

A straightforward double intramolecular cyclization of dibenzyl dichalcogenols into a triple bond

The intramolecular cyclizations of four types of dibenzyl chalcogenols, which contained one or two ethynyl groups, were carried out. Either the double 5-exo or 6-endo-dig mode ring closure reaction regio- and stereoselectively proceeded to give the corresponding symmetrical bis(benzo[c]chalcogenophene) or bis(isochromene) derivatives from the dibenzyl chalcogenols having a diyne moiety. In contrast, the regioselective tandem 5-exo-dig mode intramolecular ring closure reactions of dibenzyl thiol and selenol having a mono-yne into a triple bond gave the trans-biisobenzothiophene and selenophene as the sole product. However, the similar cyclization of dibenzyl tellurol proceeded in both tandem 5-exo and 6-endo-dig modes to afford the trans-biisobenzotellurophene and ditellurachrysene in good yields with the ratio of 1:1. The X-ray structural analysis of these novel compounds is also presented.     

Structure and photoelectrochemical properties of phthalocyanine and perylene diimide composite clusters deposited electrophoretically on nanostructured SnO2 electrodes

Clusters of phthalocyanine and phthalocyanine-perylene diimide have been prepared and electrophoretically deposited on nanostructured SnO2 electrodes. The structure and photoelectrochemical properties of the clusters have been investigated by using UV-visible absorption, dynamic light scattering (DLS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and photoelectrochemical and photodynamical measurements. Enhancement of the photocurrent generation efficiency in the composite system has been achieved relative to that in the phthalocyanine reference system without the perylene diimide. Such information will be valuable for the design of molecular photoelectrochemical devices that exhibit efficient photocurrent generation.     

Toward the total synthesis of vineomycin B2: application of an efficient glycosylation methodology using 2,3-unsaturated sugars

The application of an efficient glycosylation methodology using 2,3-unsaturated sugars to synthesize critical precursors required for the total synthesis of an antibiotic, vineomycin B₂ (1), was demonstrated. The required disaccharide, the acurosyl rhodinose derivative of 1, was prepared by chemoselective glycosylation using a 2,3-saturated glycosyl acetate corresponding to the rhodinose moiety and a 2,3-unsaturated glycosyl acetate corresponding to the acurose portion. Further, the right-hand side chain of 1, consisting of β-oxo-tert-alcohol and rhodinose, was constructed by a powerful glycosylation approach using a 2,3-unsaturated glycosyl acetate in an ionic liquid under reduced pressure.     

NMR characterization of α- and β-mannopyranurono-2,6-lactones

Determining the stereochemistry at the anomeric position of glycosides is imperative in chemical synthesis. As for 1,2-cis-β-glycosides such as β-mannosides, ¹³C-¹H coupling constants, ¹J_CHs, are conventionally used when glycosides are in an ordinary chair conformation. In this work, we searched for appropriate criteria to determine the stereochemistry of products in a recently developed glycosylation reaction using 2,6-lactones. As a result, we found that α-glycosides exhibited vicinal coupling constants of around 3.0?Hz?at the anomeric proton, as well as a long-range coupling between protons at C-1 and C-5, whereas β-glycosides had coupling constants of 1.2?Hz?at most. These figures are expected to be useful for future assignments. In addition, the observations obtained from this study revealed the conformation of glycosides with a 2,6-lactone moiety.     

Freeze-fracture electron microscopic and calorimetric studies on microscopic states of surface-modified liposomes with poly(ethylene glycol) chains

The differential scanning calorimetry (DSC) and the freeze-fracture electron microscopy of dipalmitoyl phosphatidylcholine (DPPC) liposomes containing distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (PEG-DSPE) were carried out. The DSC peak of DPPC liposomes containing PEG-DSPE had a shoulder. The main phase transition temperature of DPPC bilayer membranes containing PEG-DSPE whose molecular weight of PEG is less than 3000 was slightly shifted to a higher temperature, while that containing PEG-DSPE whose molecular weight of PEG is more than 5000 was slightly shifted to a lower temperature. The electron micrographs of freeze-fracture replicas of DPPC liposomes containing PEG-DSPE quenched from 37±2°C exhibited banded and planar textures, suggesting the lateral phase separation in the bilayer membranes.     

High critical current density YBa2Cu3O7−δ tapes prepared by the surface-oxidation epitaxy method

YBa₂Cu₃O_7−δ (YBCO) films with high critical current density (J_c) were successfully fabricated on nickel tapes buffered with epitaxial NiO. NiO was prepared on the textured nickel tape by the surface-oxidation epitaxy (SOE) method. We have reported so far a critical temperature (T_c) of 87 K and J_c=4–6×10⁴ A/cm² (77 K, 0 T) for the YBCO films on NiO/Ni tapes. To enhance the superconducting properties of the YBCO films on the SOE-grown NiO, depositions of thin oxide cap layers such as YSZ, CeO₂, and MgO on NiO were investigated. These oxide cap layers were epitaxially grown on NiO and provided the template for the epitaxial growth of YBCO films. Substantially improved data of T_c=88 K and J_c=3×10⁵ A/cm² (77 K, 0 T) and 1×10⁴ A/cm² (77 K, Hc, 4 T) were obtained for YBCO film on NiO, by using a MgO cap layer with a thickness of 50 nm. The method described in this paper is a simple way to produce long YBCO tape conductors with high-J_c values.     

Synthesis,liquid crystallinity,and mechanical properties of thermotropic polyquinolines

Thermotropic liquid-crystalline polyquinolines with high molecular weights, i.e., poly[2,2′-(α,ω-dioxyphenylene (or -dioxybiphenylene) alkane)-6,6′-(4,4′-dioxybiphenyl)-bis(4-phenylquinoline)]s (P-H-B1Mns or P-H-B2Mns), were synthesized by polycondensation of 4,4′-bis(4-amino-3-benzoylphenoxy)biphenyl and α,ω-bis(4-acetophenoxy (or -acetobiphenoxy))alkanes. For P-H-B1Mn series, the T_m and T_i were in the range of 129–230°C and 156–254°C, respectively, while for the P-H-B2Mn series, those were 182–275°C and 217–309°C, respectively. The introduction of both the dioxybiphenylene group and an alkylene spacer induced thermotropic liquid crystallinity in the polyquinoline, although the introduction of the alkylene spacer alone did not induce it. In addition, polyquinolines substituted with methyl, methoxy, and chloro groups exhibited larger mesophase temperature ranges as well as higher T_ms and T_is than the unsubstituted ones. Tensile strengths of these thermotropic polyquinolines were considerably high in the range of 770 to 1170 kgf/cm². © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 749–759, 1998     

Liquid crystallinity,IR analysis,and mechanical properties of thermotropic polyamides having alkylene spacers

Thermotropic polyamides with high molecular weights were synthesized by melt polycondensation of 3,3′-disubstituted-4,4′-biphenylenediacetamides with α,o-diphenoxyalkane-4,4′-dicarboxylic acids. Methyl, methoxy, and chloro groups were used as 3,3′-substituents. IR measurements revealed that there are hydrogen-bonded carbonyls and free carbonyls the intensities of which depended on the polymer structure and the temperature. The thermotropic liquid crystallinity of the polyamides is assumed to occur by a decrease in intermolecular hydrogen bondings between carbonyls and amide NH's which was caused both with 3,3′-substitutions of the biphenylene moiety and with introduction of long alkylene spacers in the polymer backbone. In addition, mechanical properties of the thermotropic polyamides were measured on the molded dumbbell-type specimen. The 3,3′-dichloro polyamides showed medium tensile strengths and moduli in the range of 500–890 kgf/cm²a nd 19.0 × 10³ to 27.0 × 10³ kgf/cm², respectively. © 1996 John Wiley & Sons, Inc.