Biophysical characterization of complexation of DNA with block copolymers of poly(2-dimethylaminoethyl) methacrylate, poly(ethylene oxide), and poly(propylene oxide)

The interactions of DNA (salmon testes) with two new cationic block copolymers made of poly(2-dimethylaminoethyl) methacrylate and poly(ethylene oxide), PEO-pDMAEMA, or poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), L92-pDMAEMA, were studied with the aim to understand their different in vitro transfection efficiencies when used as nonviral delivery vectors. PEO-pDMAEMA does not show surface activity while L92-pDMAEMA is as surface active as its parent Pluronic L92. Surface tension, titration microcalorimetry, ethidium bromide displacement, and zeta-potential measurements were carried out in phosphate buffers at pH 5 and 7. The association of L92-pDMAEMA with DNA was strongly exothermic at both pHs; the critical aggregation concentration (CAC) corresponded to a N/P ratio of 0.3, the maximum energy evolved was reached for N/P ratios of 0.82 and 1.27 at pH 5 and pH 7, respectively, and the saturation occurred for N/P ratios close to 2. The presence of L92 in the structure of this new block copolymer apparently did not modify the thermodynamic parameters of the interaction with DNA. In contrast, the interaction with PEO-pDMAEMA was significantly less exothermic, and CAC and saturation occurred for N/Ps equal to 0.43 and 1.37, respectively. The strong affinity of L92-pDMAEMA for DNA was reflected in its capacity to displace ethidium bromide and in the jump in the values of the zeta potential when N/P is near 1. Above the N/P ratio at which electroneutral polyplexes are formed, only at pH 5 an excess of L92-pDMAEMA is incorporated in the complexes, resulting in positively charged complexes. The profile of the zeta-potential values obtained for mixtures of L92-pDMAEMA with Pluronic P123 showed a shift to a lower N/P ratio, owing to an easier interaction of L92-pDMAEMA molecules with DNA in the presence of P123. Additionally, a visual inspection of the systems indicates that P123 contributes to stabilize/solubilize the DNA/cationic polymer aggregates, by avoiding the typical phase separation near the charge neutralization point. The information obtained can be particularly useful to optimize the conditions to form efficient polyplexes for gene delivery systems.     

Synthesis of cis bis-β-lactams via Staudinger cycloaddition reaction using C2-symmetric 1,2-diamines

An efficient stereoselective synthesis of bis-β-lactams via cycloaddition reaction (Staudinger reaction) of ketenes with bisimines derived from C₂-symmetric 1, 2-diamines is described. The reaction provided diastereomeric mixture of meso and C₂-symmetric cis-bis-β-lactams with higher selectivity for meso-bis-β-lactams.     

Polarographic determination of Pb, Tl, Bi and Sb in ethylenediamine in presence of mannitol

Summary Pb, Tl, Bi and Sb yield well defined polarograms in 1 M ethylenediamine in presence of 3% mannitol, with half-wave potentials at – 0.71 V, – 0.51 V, – 0.60 V and – 1.10 V, respectively. Only Pb and Tl develop maxima which can be suppressed by 0.02% gelatin. Presence of mannitol prevents the precipitation of Pb, Bi, and Sb in the alkaline solution. Simultaneous determinations of Pb/Tl, Bi/Sb, and Pb/Sb can be carried out.

---

Polarographische Bestimmung von Pb, Tl, Bi und Sb in Äthylendiamin in Gegenwart von Mannit

Zusammenfassung Gut ausgebildete Polarogramme kann man von diesen Elementen in 1 M Äthylendiamin in Gegenwart von 3% Mannit erhalten. Die Halbstufenpotentiale liegen bei – 0,71 V (Pb), – 0,51 V (Tl), – 0,60 V (Bi) und – 1,10 V (Sb). Maxima, die im Falle von Pb und Tl gebildet werden, können durch 0,02% Gelatine unterdrückt werden. Durch Mannit wird die Fällung von Pb, Bi, und Sb in der alkalischen Lösung verhindert. Simultanbestimmungen von Pb/Tl, Bi/Sb und Pb/Sb sind möglich.

Our sincere thanks are due to Dr. G. B. Singh, Professor and Head, Department of Chemistry, B.H.U. for providing the necessary facilities.     

Oxidation of heme to beta- and delta-biliverdin by Pseudomonas aeruginosa heme oxygenase as a consequence of an unusual seating of the heme

The origin of the unusual regioselectivity of heme oxygenation, i.e. the oxidation of heme to delta-biliverdin (70%) and beta-biliverdin (30%), that is exhibited by heme oxygenase from Pseudomonas aeruginosa (pa-HO) has been studied by (1)H NMR, (13)C NMR, and resonance Raman spectroscopies. Whereas resonance Raman indicates that the heme-iron ligation in pa-HO is homologous to that observed in previously studied alpha-hydroxylating heme oxygenases, the NMR spectroscopic studies suggest that the heme in this enzyme is seated in a manner that is distinct from that observed for all other alpha-hydroxylating heme oxygenase enzymes for which a structure is known. In pa-HO, the heme is rotated in-plane approximately 110 degrees, so the delta-meso-carbon of the major orientational isomer is located within the HO-fold in the place where the alpha-hydroxylating enzymes typically place the alpha-meso-carbon. The unusual heme seating displayed by pa-HO places the heme propionates so that these groups point in the direction of the solvent-exposed heme edge and appears to originate in large part from the absence of stabilizing interactions between the polypeptide and the heme propionates, which are typically found in alpha-hydroxylating heme oxygenase enzymes. These interactions typically involve Lys-16 and Tyr-112, in Neisseriae meningitidis HO, and Lys-16 and Tyr-134, in human and rat HO-1. The corresponding residues in pa-HO are Asn-19 and Phe-117, respectively. In agreement with this hypothesis, we found that the Asn-19 Lys/Phe-117 Tyr double mutant of pa-HO exists as a mixture of molecules exhibiting two distinct heme seatings; one seating is identical to that exhibited by wild-type pa-HO, whereas the alternative seating is very similar to that typical of alpha-hydroxylating heme oxygenase enzymes and is related to the wild-type seating by approximately 110 degrees in-plane rotation of the heme. Furthermore, each of these heme seatings in the pa-HO double mutant gives rise to a subset of two heme isomeric orientations that are related to each other by 180 degrees rotation about the alpha-gamma-meso-axis. The coexistence of these molecules in solution, in the proportions suggested by the corresponding area under the peaks in the (1)H NMR spectrum, explains the unusual regioselectivity of heme oxygenation observed with the double mutant, which we found produces alpha- (55%), delta- (35%), and beta-biliverdin (10%). Alpha-biliverdin is obtained by oxidation of the heme seated similar to that of alpha-hydroxylating enzymes, whereas beta- and delta-biliverdin are formed from the oxidation of heme seated as in wild-type pa-HO.     

Contact metric hypersurfaces of ℂ2

Kaehler 2-form of ² being exact, it gives rise to a 1-form defined on a hypersurface of ². We show that if this 1-form defines a contact metric structure with respect to the induced metric on the compact and connected hypersurface of ², then the hypersurface is a round sphere of radius 1.This work is supported by Research Grant No. (Math/1409/05) of the Research Center, College of Science, King Saud University, Riyadh.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

Pd–phosphinesulfonate bravely battles the “vinyl halide insertion copolymerization” barricade

This overview provides insights into the current state‐of‐the‐art solutions to insertion copolymerization of functional olefinic monomers. The challenges in insertion copolymerization of functional olefinic monomers, with a special emphasis on vinyl halides, are highlighted. The crucial design of the Pd–phosphinesulfonate [Pd(PO)] enables up to 3.6 mol % incorporation of vinyl fluoride (VF) in an ethylene–VF copolymerization reaction. In a significant development, insertion copolymerization of industrially relevant functional olefin, that is, vinyl chloride (VC), was unambiguously ascertained, and a detectable amount of VC (0.4 mol %) was incorporated (at the chain end). In a detailed investigation, the in situ existence of (PO)Pd? H species during the polymerization was revealed, and it was demonstrated that these are indeed responsible for VC incorporation. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1–6     

High Activity and Selective Fischer–Tropsch Catalysts for Use in a Microchannel Reactor

Each process configuration for practicing the Fischer–Tropsch synthesis places demands particular to that configuration on the catalyst to be used. We discuss how a particular catalyst, prepared by the OMX (organic matrix combustion) method, when used in conjunction with the Velocys microchannel reactor system, results in a very stable, high performance Fischer–Tropsch synthesis system. With the ability to remove heat far more effectively than a conventional reactor system, this microchannel reactor requires a catalyst with much higher volumetric reactive site density. Further, with such a high volumetric reaction rate, mass transfer effects will be important in both the observed activity and selectivity of the operating catalyst. Nevertheless, the catalyst prepared using the OMX method exhibits an apparent turnover frequency which is considerably higher than reported for other catalysts in the literature. In addition to high activity, an economically useful catalyst must exhibit a stable, high selectivity for liquid products and be able to recover near-fresh performance using a regeneration approach which can be carried out with the catalyst in-place. An example of such a stable, multiply regenerated catalyst is given. Finally, further development has focused on a catalyst with even higher C₅₊ selectivity.     

Direct Trifluoromethylation of Alcohols Using a Hypervalent Iodosulfoximine Reagent

The direct trifluoromethylation of a variety of aliphatic alcohols using a hypervalent iodosulfoximine reagent afforded the corresponding ethers in moderate to good yields (14–72 %). Primary, secondary, and even tertiary alcohols, including examples derived from natural products, underwent this transformation in the presence of catalytic amounts of zinc bis(triflimide). Typical reaction conditions involved a neat mixture of 6.0 equivalents of the alcohol with 1.0 equivalent of the reagent, with the majority of reactions complete within 2 h with 2.5 mol % of the Lewis acid catalyst. Furthermore, experimental evidence was provided that the C−O bond-forming process occurred via the coordination of the alcohol to the iodine atom and subsequent reductive elimination.