Characterisation of ethoxylated fatty chains of anionic surfactants and determination of residual ethoxylated fatty alcohols

Bachus et al. [1] recently described a new derivatisation method using 2-furoyl chloride for the characterisation of mixtures of polyethoxylated alcohols and their corresponding sulfates. This paper deals with the control of the derivatisation steps; hydrolysis and extraction conditions were optimised. The method is extended to the characterisation of alkyl sulfosuccinates, alkyl sulfoacetates and alkyl phosphates and to the analysis of residual polyethoxylated alcohols in surfactants. Extraction of non-ionic compounds using solid-phase extraction cartridges was performed before derivatisation. Residual amounts of alcohol were determined in five commercial anionic surfactants. Moreover, direct derivatisation without preliminary SPE in the same anionic surfactants proved to be efficient for dry samples.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.     

Size dependence of the folding of multiply charged sodium cationized polylactides revealed by ion mobility mass spectrometry and molecular modelling

Ion mobility spectrometry coupled with mass spectrometry was used to experimentally determine the three-dimensional structure of multiply charged sodium cationized polylactides (PLA). In particular, the experiments were conducted to evaluate the influence of the charge state and the size on the gas-phase conformation of cationized PLA. The measured collision cross sections were then compared to calculated values obtained by computational chemistry methods. The most striking feature was the experimental and theoretical observation of a breaking point in the quasilinear relationship between the average collision cross sections and the number of monomer units for the triply charged cations. This breaking point was theoretically demonstrated, for the doubly and triply charged cations, to be associated with a significant folding of the polymer chains around the cationizing agents. The occurrence of such breaking points could be exploited to correlate the charge state of the most intense ion series observed upon electrospray ionization with the number-average molecular mass of a polymer.     

Absorption spectra of azobenzenes simulated with time‐dependent density functional theory

Using time‐dependent density functional theory and the polarizable continuum model, we have simulated the absorption spectra of an extended series of azobenzene dyes. First, we have determined a theoretical level optimal for this important class of dyes, and it turned out that a C‐PCM‐CAM‐B3LYP/6‐311+G(d,p)//C‐PCM‐B3LYP/6‐311G(d,p) approach represents an effective compromise between chemical accuracy and computational cost. In a second stage, we have compared the theoretical and experimental transition energies for 46 n → π^☆ and 141 π → π^☆ excitations. For the full set, that spans over a 302–565 nm domain, we obtained a mean absolute deviation of 13 nm (0.10 eV) and a linear correlation coefficient of 0.95, illustrating the accuracy of our approach, though some significant outliers pertained. In a last step, the impact of several modifications, that is, trans/cis isomerization, variation of the acidity of the medium and azo/hydrazo tautomerism have been modeled with two functionals. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Layer-by-layer self-assembled polyelectrolyte multilayers with embedded liposomes: immobilized submicronic reactors for mineralization

The development of chemical reactions in nanospaces is of paramount importance for the development of active nanodevices, particularly in nanofluidics. It has been shown in a previous paper that phospholipid vesicles can be incorporated without spontaneous bilayer rupture into poly-L-glutamic acid/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films. The aim of the present study was to use such a system as an "embedded submicronic reactor" able to trigger precipitation of calcium phosphates within closed spaces through an enzymatic reaction, the enzyme also being encapsulated in the vesicle interior. To this aim, large unilamellar vesicles (LUVs) were produced containing calcium ions as active ions in the mineralization process, spermine as an activator of crystal growth, and alkaline phosphatase as a catalyst to convert phosphate esters into phosphates. After stabilization by adding a layer of poly-(D-lysine), these vesicles were embedded in a (PGA-PAH)n film. A paranitrophenyl phosphate containing solution was then put in contact with this film. It is shown by means of infrared spectroscopy in the attenuated total reflection mode that, consecutively to this contact, calcium phosphates are growing inside the embedded vesicles. By using scanning near-field fluorescence microscopy, it is demonstrated that the alkaline phosphatase enzymes are most probably located inside the vesicles after their embedding. In addition, atomic force microscopy was used to show, after chemical removal of the organic top layer of the film, that the inorganic platelets produced after the precipitation reaction are localized in volumes of similar size and shape as that of the vesicles into which the phosphate ester hydrolysis and subsequent precipitation reaction did occur.     

Development and evaluation of orally disintegrating tablets (ODTs) containing Ibuprofen granules prepared by hot melt extrusion

In the current study Ibuprofen was embedded in a methacrylate copolymer (Eudragit^® EPO) matrix to produce solid dispersions by hot-melt extrusion (HME) processing. The obtained granules were incorporated in orally disintegrating tablets (ODTs). The tablets were developed by varying the ratio of superdisintegrants such as sodium croscarmellose and crosslinked polyvinylpyrrolidone grades while a direct compression process was used to compress the ODTs under various compaction forces to optimize tablet robustness. The properties of the compressed tablets which included porosity, hardness, friability and dissolution profiles were further evaluated and compared with Nurofen^® Meltlet ODTs. The taste and sensory evaluation in human volunteers demonstrated excellence in masking the bitter active and improved tablet palatability.     

Ferrocene and Porphyrin Monolayers on Si(100) Surfaces: Preparation and Effect of Linker Length on Electron Transfer

The missing link : Ferrocene and porphyrin monolayers are tethered on silicon surfaces with short (see picture, left) or long (right) linkers. Electron transfer to the silicon substrate is faster for monolayers with a short linker.

     

Simulation du drapé des tissus par maillages adaptatifsAdaptive meshing for cloth draping

Numerical simulation methods regarding fabric and cloth draping are generally based on mechanical models. These models are usually applied to uniform grids representing the true geometry of the fabric. Fabrics being a very flexible material, wrinkles appear on its surface when submitted to free or constrained motion. The main problem of the simulation is to represent realistically cloth surface motion. This is strongly dependent on the surface discretization. We present a new cloth animation scheme based on adaptive surface discretization. It can be seen as a multi-grid method which allows us to obtain realistic simulations. We propose also a new mechanical model well suited to our adaptive meshing strategy. A numerical example is given to show the efficiency of the method. To cite this article: J. Villard et al., C. R. Acad. Sci. Paris, Ser. I 335 (2002) 561–566.     

Recasting wave functions into valence bond structures: A simple projection method to describe excited states

A method is proposed to obtain coefficients and weights of valence bond (VB) determinants from multi configurational wave functions. This reading of the wave functions can apply to ground states as well as excited states. The method is based on projection operators. Both energetic and overlap‐based criteria are used to assess the quality of the resulting VB wave function. The approach gives a simple access to a VB rewriting for low‐lying states, and it is applied to the allyl cation, to the allyl radical and to the ethene (notably to the V‐state). For these states, large overlap between VB and multi reference wave functions are easily obtained. The approach proves to be useful to propose an interpretation of the nature of the V‐state of ethene. © 2015 Wiley Periodicals, Inc.     

Regio- and stereoselectivities in Diels-Alder cyclodimerizations of orthoquinonoid cyclohexa-2,4-dienones

The [4+2] cyclodimerization of cyclohexa-2,4-dienone derivatives of the orthoquinone monoketal and orthoquinol types has been the topic of numerous investigations over the last 50 years in the aim of rationalizing the extraordinary level of regio-, site-, and stereoselectivities observed in these processes. In particular, the double diastereo-π-facial differentiation expressed in cyclodimerizations of chiral orthoquinols (i.e., 6-alkyl-6-hydroxycyclohexa-2,4-dienones) is an important aspect of these transformations, for they relate to the construction of several natural products. The experimental and theoretical results that are described in this article offer a comprehensive understanding of the factors controlling these site-specific regio- and diastereoselectivities. Our interpretation of these results relies on a combination of Woodward-Hoffmann and Salem-Houk secondary orbital interactions and Cieplak-type hyperconjugative effects in bispericyclic C₂-symmetric transition states.