Effects of carbon contents on morphology and electrical properties of Li2MnSiO4/C prepared by a vacuum solid-state method

To improve the electrochemical performance of Li₂MnSiO₄ with low electric conductivity, the Li₂MnSiO₄/C composite are synthesized by a vacuum solid-state reaction of a mixture of SiO₂, LiCH₃COO, Mn(CH₃COO)₂ and designed mass of C₆H₁₂O₆ · H₂O as carbon sources. The crystalline structure and morphology of products are analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and laser scattering technology (LS) respectively. The tested results show that carbon doping decrease the crystallite sizes of products, but keep the aggregation of the particles and made the impurity increased instead. The results of constant current charge-discharge prove that the mixed carbon improve Li⁺ transmission performance and decrease inner polatization resistance of Li₂MnSiO₄ materials, but can not prevent the collapse of Li₂MnSiO₄ crystal structure. While the galvanostatic intermittent titration technique (GITT) results demonstrate that the primary reason for the improved electrochemical performance can be attributed to increased Li-ion diffusion coefficient $(D_{Li^ + } )$ as a result from carbon doping.     

Effect of TiMn1.5 alloying on the structure,hydrogen storage properties and electrochemical properties of LaNi3.8Co1.1Mn0.1 hydrogen storage alloys

A series of experiments were performed to investigate the effect of TiMn_1.5 alloying on the structure, hydrogen storage properties and electrochemical properties of LaNi_3.8Co_1.1Mn_0.1 hydrogen storage alloys at 303 K. For simple, A, B, and C are used to represent alloys (x = 0 wt %, x = 4 wt % and x = 8 wt %) respectively. The results of XRD and SEM show that LaNi_3.8Co_1.1Mn_0.1?xTiMn_1.5 hydrogen storage alloys have LaNi₅ phase and (NiCo)₃Ti phase. Based on the results of PCT curves, the hydrogen storage capacities of LaNi_3.8Co_1.1Mn_0.1?xTiMn_1.5 hydrogen storage alloys are about 1.28 wt % (A), 1.16 wt % (B) and 1.01 wt % (C) at 303 K. And the released pressure platform and the pressure hysteresis decrease with the increase of TiMn_1.5 content. Meanwhile the activation curves show that LaNi_3.8Co_1.1Mn_0.1?xTiMn_1.5 hydrogen storage alloy electrodes can be activated in three times and the maximum discharge capacity is 343.74 mA h/g at 303 K. In addition, with the increase of TiMn_1.5 content, the cyclic stability of the hydrogen storage alloy electrodes decreases obviously and the capacity retention decreases from 76.70% to 70.00% when TiMn_1.5 content increases from A to C. It also can be seen that LaNi_3.8Co_1.1Mn_0.1?xTiMn_1.5 hydrogen storage alloy electrode C and B have the best self-discharge ability and the best high-rate discharge ability from self-discharge curves and high-rate discharge curves.     

Multi‐Colored Fibers by Self‐Assembly of DNA,Histone Proteins,and Cationic Conjugated Polymers

The development of biomolecular fiber materials with imaging ability has become more and more useful for biological applications. In this work, cationic conjugated polymers (CCPs) were used to construct inherent fluorescent microfibers with natural biological macromolecules (DNA and histone proteins) through the interfacial polyelectrolyte complexation (IPC) procedure. Isothermal titration microcalorimetry results show that the driving forces for fiber formation are electrostatic and hydrophobic interactions, as well as the release of counterions and bound water molecules. Color‐encoded IPC fibers were also obtained based on the co‐assembly of DNA, histone proteins, and blue‐, green‐, or red‐ (RGB‐) emissive CCPs by tuning the fluorescence resonance energy‐transfer among the CCPs at a single excitation wavelength. The fibers could encapsulate GFP‐coded Escherichia coli BL21, and the expression of GFP proteins was successfully regulated by the external environment of the fibers. These multi‐colored fibers show a great potential in biomedical applications, such as biosensor, delivery, and release of biological molecules and tissue engineering.     

Effect of Cu content on structure,hydrogen storage properties and electrode performance of LaNi4.1-x Co0.6Mn0.3Cu x alloys

The effect of Cu content on structure, hydrogen storage, and electrochemical properties of LaNi_4.1-x Co_0.6Mn_0.3Cu _x alloys has been investigated. For sample, A, B, C, and D are used to represent alloys (x?=?0, 0.15, 0.3, and 0.45), respectively. The results indicate that the four alloys are all single-phase alloy with LaNi₅ phase of CaCu₅ hexagonal structure, the hydrogen storage capacities of the alloy are about 1.49 wt% (A), 1.48 wt% (B), 1.43 wt% (C), and 1.25 wt% (D) at 303 K. With the increase of Cu content (x) from A to D, hydrogen desorption plateau pressure and pressure hysteresis decrease. Alloy electrode A shows better activation property and higher capacity (334.44 mAh/g). The addition of Cu improves the cyclic stability of the alloy electrodes when x?=?0?~?0.45. However, their self-discharge properties and high-rate dischargeability (HRD) decrease with the increase of x. Further, electrochemical kinetics and electrochemical impedance spectroscopy (EIS) analysis show that the reaction of alloy electrode is controlled by charge transfer step, and the adding of Cu benefits the electrode properties in alkaline solution.     

An Ylide Transformation of Rhodium(I) Carbene: Enantioselective Three‐Component Reaction through Trapping of Rhodium(I)‐Associated Ammonium Ylides by β‐Nitroacrylates

The chiral Rh^I–diene‐catalyzed asymmetric three‐component reaction of aryldiazoacetates, aromatic amines, and β‐nitroacrylates was achieved to obtain γ‐nitro‐α‐amino‐succinates in good yields and with high diastereo‐ and enantioselectivity. This reaction is proposed to proceed through the enantioselective trapping of Rh^I‐associated ammonium ylides by nitroacrylates. This new transformation represents the first example of Rh^I‐carbene‐induced ylide transformation.     

Screening and analysis of metabolites in rat urine after oral administration of Apocynum venetum L. extracts using HPLC–TOF‐MS

HPLC with diode array detection and ESI‐TOF‐MS was used for the study of the constituents in Apocynum venetum L. extracts and the metabolites in rat urine after oral administration of A. venetum L. extracts. A formula database of the known constituents in A. venetum L. was established, and 21 constituents were rapidly identified by accurately matching their molecular masses with the formulae of the compounds in the database. Furthermore, 34 metabolites were detected and elucidated in the rat urine. The scientific and plausible biotransformation pathways of the flavonoid components in A. venetum L. were also proposed together with the presentation of clues for potential mechanisms of bioactivity. This specific and sensitive HPLC–ESI‐TOF‐MS method can be used to identify the chemical components in the extracts of A. venetum L. and their metabolites in rat urine. This method can also be used to reveal the possible metabolic mechanisms of action of the extract components in vivo.     

Synthesis,Characterizations, Magnetism and Thermal Degradation of a 2‐Fold Interpenetrated 3D Cobalt‐Organic Framework

A new coordination polymer, [Co₂(L)₂(4,4′‐bipy)]_n·3nH₂O ( 1 ) based on 5‐(3‐methyl‐5‐phenyl‐4H‐1,2,4‐triazol‐4‐yl)isophthalic acid (H₂ L ) and 4,4′‐bipyridine (4,4′‐bipy) has been hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction, XRPD, IR, and elemental analysis. Temperature‐dependent magnetic susceptibility and thermal degradation for 1 were also studied. The asymmetric unit of compound 1 consists of two crystallographically independent Co(II) ion, two L ^2? ligand, one 4,4′‐bipy ligand, and three lattice water molecules. The 2D triangle networks were linked by the bridging 4,4′‐bipy ligand to give rise to a 2‐fold interpenetrated 3D architecture. The simplest cyclic motif of the 2D networks is a triangle ring consisting of three Co(II) cations and three L ^2? ligands. So we can define Co(II) ions as 4‐connected nodes and the L ^2? ligands as 3‐connected nodes. Thus, the 3D structure can be described as a 2‐fold parallel interpenetrated ins InS 3,4‐conn topology.     

Influence of Cell Disruption and Elution on Cellulase Release of Clostridium straminisolvens (CSK1)

Clostridium straminisolvens (CSK1) is a novel cellulolytic bacterium isolated from a cellulose-degrading bacterial community MC1. In this study, the influence of the following cell disruption and elution methods on CSK1cellulase release was investigated: (1) freezing–thawing, (2) ultrasonication, (3) elution, (4) freezing–thawing following elution, (5) ultrasonication following elution, and lastly (6) high-pressure homogenization following elution. The activity of the cellulases CMCase, β-glucosidase, Avicelase, FPase, and xylanase in crude extracts increased 81.5, 23.8, 87.7, 46.3, and 51.7 %, respectively, with an observed optimal treatment method for each cellulase type. The release of protein from CSK1 cells increased following either cell disruption or elution and was highest at 88.3 % in the homogenization high pressure following elution treatment. A newly observed protein was present following cell elution. The performance of cell elution as determined by real time-PCR indicated that the first time cell elution removed more than 90 % of the CSK1 cells from the substrate. These findings demonstrate that cell disruption and elution are effective methods for inducing cellulase release, and elution is the key step for CSK1. To our knowledge, this study presents the first evidence of optimal treatments for induction of cellulase release of Clostridium straminisolvens. This information will be of great value for use in subsequent efforts to better understand the cellulase characteristics of CSK1 and cellulose degradation mechanisms of the MC1 community.     

Preparation of novel magnetic fluorescent microspheres from copperas and fluorescence enhancement with zinc ions

The aim of this study is to develop a new method for the preparation of Fe₃O₄@SiO₂–An NPs from copperas. The core–shell structures of the nanoparticles and chemical composition have been confirmed by TEM, XRD and FTIR techniques. Fluorescence Enhancement of Fe₃O₄@SiO₂–An NPs with zinc ions was investigated by fluorescence emission spectra. The results indicated that the Fe₃O₄ NPs with a high purity (Total Fe 72.16 %) were obtained from copperas by chemical co-precipitation method and have a uniform spherical morphology with an average diameter of about 10 nm. The Fe₃O₄ NPs coated with silica nanoparticles were prepared, and an attempt had been made that the Fe₃O₄@SiO₂ NPs were modified by 3-aminopropyltriethoxysilane and 9-anthranone successively. The recommended mole ratio of ethanol to water and the content of ammonia water added were 4:1 and 25 wt% respectively, which have an obviously effect on the combination of the final well-ordered MNPs with the amino functionalities and reactant components. The functionalized Fe₃O₄@SiO₂–An NPs have a fluorescence property and this fluorescence effect can be enhanced with the Zn²⁺ ions attachment. Meanwhile, the saturated magnetization of Fe₃O₄@SiO₂–An NPs was 37.8 emug^?1 at 25 °C and this fluorescent material exhibited excellent magnetic properties. A new way was therefore provided for the comprehensive utilization of the unmarketable copperas. Moreover, the functionalized Fe₃O₄@SiO₂–An NPs have a big potential in environmental decontamination, medical technology and biological science.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.