New isostructural transition metal complexes with a non‐innocent dithiolate ligand

Three new complexes with 3,6‐dichlorobenzene‐1,2‐dithiol (bdtCl₂), namely methyltriphenylphosphonium bis(3,6‐dichlorobenzene‐1,2‐dithiolato‐κ²S,S′)cobaltate(1−), (C₁₉H₁₈P)[Co(C₆H₂Cl₂S₂)₂], (I), bis(methyltriphenylphosphonium) bis(3,6‐dichlorobenzene‐1,2‐dithiolato‐κ²S,S′)cuprate(2−) dimethyl sulfoxide disolvate, (C₁₉H₁₈P)₂[Cu(C₆H₂Cl₂S₂)₂]·2C₂H₆OS, (II), and methyltriphenylphosphonium bis(3,6‐dichlorobenzene‐1,2‐dithiolato‐κ²S,S′)cuprate(1−), (C₁₉H₁₈P)[Cu(C₆H₂Cl₂S₂)₂], (III), have been synthesized and characterized by single‐crystal X‐ray diffraction. The X‐ray structure analyses of all three complexes confirm that the four donor S atoms form a slightly distorted square‐planar coordination arrangement around the central metal atom. An interesting finding for both the Cu^II and Cu^III complexes, i.e. (II) and (III), respectively, is that the coordination polyhedra are principally the same and differ only slightly with respect to the interatomic distances.     

Fire hazard and heat of combustion of sunflower seed hull pellets

This study is concerned with the investigation of the impact of heat flux on the fire hazard and the effective heat of combustion of sunflower seed hull pellets. Pellets produced by pressing common sunflower seed hulls (Helianthus annuus L.) were investigated. The samples were dried on water content of 0 mass% at a temperature of 103 ± 2 °C. The fire hazard and the heat of combustion have been determined via the cone calorimeter and by the testing procedure per ISO 5660-1:2015 at three heat fluxes (25, 35 and 50 kW m⁻²). The peak heat release rate increases with the increasing of the heat flux from 446 (at a heat flux of 25 kW m⁻²) to 601 kW m⁻² (at a heat flux of 50 kW m⁻²). The carbon monoxide yield lies in the interval from 82.50 (at a heat flux of 25 kW m⁻²) to 154.15 g kg⁻¹ (at a heat flux of 50 kW m⁻²). The effective heat of combustion decreases with the increasing of the heat flux from 15.84 (at a heat flux of 25 kW m⁻²) to 14.58 MJ kg⁻¹ (at a heat flux of 50 kW m⁻²).

     

Stress characterization of elastodynamics with continuously distributed defects

A pure stress formulation of linear nonhomogeneous anisotropic elastodynamics with continuously distributed defects (EcDD) is proposed, and well known solutions of ECDD corresponding to stationary and moving concentrated plastic fields in an infinite body are recovered by direct integration of the stress field equation. A new interpretation of the solutions is given.     

Acceleration of self-consistent-field convergence by combining conventional diagonalization and a diagonalization-free procedure

A new scheme that combines conventional matrix diagonalization with the recently proposed diagonalization-free algorithm has been developed to obtain the density matrix for the next self-consistent-field iteration from the Fock matrix of the current iteration. In this manner, the advantages of the two methods are combined. The more rapid convergence of the diagonalization-free algorithm for density matrices rather close to self consistence and the more robust convergence of the conventional matrix diagonalization further away from self-consistence. The scheme has been implemented in the one- and two-component self-consistent-field procedures in the program system TURBOMOLE. The number of iterations is typically reduced by about 10%, but savings are usually much larger for slowly converging cases.     

Theoretical study on transesterification in a combined process consisting of a reactive distillation column and a pervaporation unit

Steady state analysis of a combined hybrid process consisting of a reactive distillation column, pervaporation unit, and a distillation column is presented. This process configuration was first presented by Steinigeweg and Gmehling (2004) for the transesterification of methyl acetate and butanol to butyl acetate and methanol. This system is characteristic for its low reaction rate and complex phase equilibrium. Steinigeweg and Gmehling (2004) have shown that the combination of reactive distillation and pervaporation is favourable since conversions close to 100 % can be reached with a reasonable size of the reactive section in the reactive distillation column. The aim of this paper is to show that although high conversion can be achieved, very complicated steady state behaviour must be expected. The presented analysis is based on mathematical modelling of a process unit, where the steady-state analysis, including continuation and bifurcation analyses, was used. Multiple steady states were predicted for the studied system; three steady states with conversions higher than 98 %. However, not all predicted steady states met the maximal allowed temperature condition in the reactive section (catalyst maximal operation temperature of 393 K). The presence of multiple steady states reduces the operability and controllability of the reactive distillation column during its start-up and during the occurrence of any variation of operating parameters because the system can be shifted from one steady state to another one (concurrent exceeding the maximal allowed temperature) with unwanted consequences, e.g. production loss. Therefore, design and subsequent operation of such a complicated system is an ambitious task requiring knowledge of any possible system behaviour.     

Hydrogen‐Bond‐Based Magnetic Exchange Between μ‐Diethylnicotinamide(aqua)bis(X‐salicylato)copper(II) Polymeric Chains

Polymeric salicylatocopper(II) complexes of unusual composition [C u(X‐ sal)₂( μ‐denia)(H₂O)]_n [denia = diethylnicotinamide, and X‐sal = 5‐methylsalicylate ( 1 ), 3‐methylsalicylate ( 2 ), 4‐methoxysalicylate ( 3 ), 3,5‐dichlorosalicylate ( 4 ) and 3,5‐dibromosalicylate ( 5 )] were synthesized and characterized. Magnetic measurements were performed in the temperature range 1.8–300 K. The structural unit of all complexes consists of a Cu^II atom, which is monodentately coordinated by the pair of X‐salicylate anions in trans positions. Water and the diethylnicotinamide ligand occupy the other two basal plane positions of the tetragonal pyramid. The axial positions are occupied by a diethylnicotinamide oxygen atom of neighboring structural units, thus forming a spiral polymeric structure parallel to b axis. Magnetic measurements showed that all complexes 1 – 5 exhibit a susceptibility maximum at about 6–8 K. The obtained data fit to Bleaney–Bowers equation gave singlet‐triplet energy gaps 2J = –8.60 cm^–1 for 1 , 2J = –6.57 cm^–1 for 2 , 2J = –8.57 cm^–1 for 3 , 2J = –6.82 cm^–1 for 4 , and 2J = –6.45 cm^–1 for 5 . The supramolecular structure based on hydrogen bonds [described by supramolecular synthons R₂²(10) and R₂²(12)] is the pathway for antiferromagnetic interactions of the magnetically coupled pairs of copper atoms of neighboring chains within the 2D supramolecular layers. The results of the magnetic measurements suggest involvement of the COO groups in the magnetic interaction pathway for all five complexes.     

Synthesis of trihydroxylated pyrrolizidine and indolizidine alkaloids based on SmI2-induced reductive coupling of chiral nitrones with methyl acrylate

Synthesis of trihydroxylated pyrrolizidines, the enantiomer of 2-epihyacinthacine A₂ and indolizidine analogues of the natural alkaloids is reported. The key step of these syntheses is the stereoselective samarium diodide-induced coupling of the chiral nitrone prepared from d-ribose with methyl acrylate. The nitrone derived from d-ribose possessing C2/C3 syn configuration reacted with methyl acrylate in the presence of samarium diiodide in excellent yield and diastereoselectivity, with only the anti-diastereomer being detected.     

Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds

Cellulose nanofibrils were prepared by mechanical fibrillation of never-dried beech pulp and bacterial cellulose. To facilitate the separation of individual fibrils, one part of the wood pulp was surface-carboxylated by a catalytic oxidation using (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) as a catalyst. After fibrillation by a high pressure homogenizer, the obtained aqueous fibril dispersions were directly mixed with different urea–formaldehyde-(UF)-adhesives. To investigate the effect of added cellulose filler on the fracture mechanical properties of wood adhesive bonds, double cantilever beam specimens were prepared from spruce wood. While the highest fracture energy values were observed for UF-bonds filled with untreated nanofibrils prepared from wood pulp, bonds filled with TEMPO-oxidized fibrils showed less satisfying performance. It is proposed that UF-adhesive bonds can be significantly toughened by the addition of only small amounts of cellulose nanofibrils. Thereby, the optimum filler content is largely depending on the adhesive and type of cellulose filler used.     

Single- and two-photon excited fluorescence in organic nonlinear optical single crystal 3-(1,1-dicyanoethenyl)-1-phenyl-4,5-dihydro-1H-pyrazole

Fluorescence of nonlinear optical organic single crystal of 3-(1,1-dicyanoethenyl)-1-phenyl-4,5-dihydro-1H-pyrazole (DCNP) excited by a nonabsorbed light pulses from Q-switched Nd:YAG laser λ = 1064 nm as well as absorbed λ = 532 nm light is reported. Two mechanisms of two-photon excited fluorescence are considered: (i) direct two-photon excited fluorescence and (ii) single-photon excitation due to reabsorption of light generated in process of second harmonic generation (SHG) by the crystal due to its nonlinear optical properties. Strong anisotropy of fluorescence that has been observed is linked with uniaxial molecular alignment. Fluorescence decay profile shows two- exponential decay with lifetimes of emitting species of 3.7 and 5.6 ns at 293 K. The excitation and fluorescence spectra of the DCNP single crystal have been measured at 294 K and in function of temperature down to 77.4 K. The strong bathochromic shift of fluorescence spectrum in crystal with respect to fluorescence of DCNP molecule in solution is observed and interpreted with possible formation of molecular aggregates.     

Green microfluidic devices made of corn proteins

An alternative green microfluidic device made of zein, a prolamin of corn, can be utilized as a disposable environmentally friendly microchip especially in agriculture applications. Using standard soft lithography and stereo lithography techniques, we fabricated thin zein films with microfluidic chambers and channels. These were bonded to both a glass slide and another zein film. The zein film with microfluidic features bonds irreversibly with other surfaces by vapor-deposition of ethanol to create an adhesive layer resulting in very little or no trapped air and small shape distortion. Zein-zein and zein-glass microfluidic devices demonstrated sufficient strength to facilitate fluid flow in a complex microfluidic design that showed no leakage under high hydraulic pressure. Zein-glass microfluidic devices with serpentine mixing design showed successful fluid manipulation as a concentration gradient of Rhodamine B solution was generated. The ease of fabrication and bonding and the flexibility and moldability of zein offer attractive possibilities for microfluidic device design and manufacturing. These devices can include several unit operations with mixing being one of the most commonly used. The zein-based microfluidic devices, made entirely from a biopolymer from agricultural origin, offer alternative environmentally friendly material choices that are less dependent on limited petroleum based polymer resources.