Carbon Nanotubes/Heteroatom‐Doped Carbon Core–Sheath Nanostructures as Highly Active,Metal‐Free Oxygen Reduction Electrocatalysts for Alkaline Fuel Cells

A facile, scalable route to new nanocomposites that are based on carbon nanotubes/heteroatom‐doped carbon (CNT/HDC) core–sheath nanostructures is reported. These nanostructures were prepared by the adsorption of heteroatom‐containing ionic liquids on the walls of CNTs, followed by carbonization. The design of the CNT/HDC composite allows for combining the electrical conductivity of the CNTs with the catalytic activity of the heteroatom‐containing HDC sheath layers. The CNT/HDC nanostructures are highly active electrocatalysts for the oxygen reduction reaction and displayed one of the best performances among heteroatom‐doped nanocarbon catalysts in terms of half‐wave potential and kinetic current density. The four‐electron selectivity and the exchange current density of the CNT/HDC nanostructures are comparable with those of a Pt/C catalyst, and the CNT/HDC composites were superior to Pt/C in terms of long‐term durability and poison tolerance. Furthermore, an alkaline fuel cell that employs a CNT/HDC nanostructure as the cathode catalyst shows very high current and power densities, which sheds light on the practical applicability of these new nanocomposites.     

Solution-Processable Low Voltage Organic Transistors of Thieno[3,2-b]thiophene-Based Conducting Polymer

A low-operating voltage and high performance polymeric field effect transistors using octadecylphosphonic acid-treated high-k AlOx and HfO₂ hybrid dielectrics were demonstrated. High-k metal oxide hybrid dielectrics were prepared by oxygen plasma treatment of deposited Al film for AlOx and by spin coating of solution-processable HfO₂ sol-gel solution for HfO₂ in combination with phosphoric acid-based self-assembled monolayer (SAM), resulting in high capacitance (10 nF/cm² for SiO₂, 600 nF/cm² for AlOx and 580 nF/cm² for HfO₂). With phosphoric acid-based SAM on high-k metal oxide and thermal annealing of thieno[3,2-b]thiophene-based conducting polymer, the device performance was significantly enhanced. The highest mobility of the transistors using ODPA-treated AlOx as a gate dielectric is 2.3 × 10^?2 cm² V^?1 s^?1 in the saturation region with the source-drain of ?2 V. In ODPA-treated HfO₂ hybrid dielectric, the saturated mobility is 1.1 × 10^?2 cm² V^?1 s^?1 and the threshold voltage was measured to be ?0.31 V, which is at least one order lower than SiO₂ hybrid dielectric (?3 V).     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer

Water transport is critical to the successful implementation of polymer electrolyte fuel cells (PEFC), especially in long-term and dynamic operation in automotives. Liquid water appears in the fuel cells not only from the water generated at the cathode catalyst layer but also as a result of condensation of water vapor from the humidified gases. In this study, we report a simple approach to prepare a superhydrophobic gas diffusion layer by chemical vapor deposition of polydimethylsiloxane without significant change in pore size of gas diffusion layer unlike other approach adding hydrophobic agent such as polytetrafluoroethylene. A superhydrophobic coating on the GDL can be obtained, leading to exceptionally enhanced power performance and stability of PEFC especially at a high current where water transport becomes more critical.     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Genetic analyzer-dependent DNA methylation detection and its application to existing age prediction models

DNA methylation is the most promising biomarker for estimating human age. There are various methods used for analyzing DNA methylation. Among those, the SNaPshot assay-based method provides a semi-quantitative measurement of DNA methylation using capillary electrophoresis on genetic analyzers. However, DNA methylation measures produced using different types of genetic analyzers have never been compared, although differences in methylation values can directly affect age estimates. To evaluate the differences between the results generated by different genetic analyzers, we analyzed the same blood, saliva, and control methylated DNA using three genetic analyzers—the Applied Biosystems 3130, 3500, and SeqStudio—and compared the methylation values at five CpG sites: ELOVL2, FHL2, KLF14, MIR29B2C, and TRIM59. The methylation value at each of the five CpG sites decreased in the order 3130, 3500, and SeqStudio. The differences in the results produced by the different genetic analyzers resulted in significant errors when applying the 3500 and SeqStudio data to a previous age estimation model constructed using the 3130 Genetic Analyzer data. Therefore, DNA methylation measurements from 3500 and SeqStudio were corrected using the regression functions obtained by plotting the DNA methylation data of one instrument versus the other to facilitate the application of DNA methylation data from one instrument to the age prediction model based on other instruments. The age prediction accuracy obtained by applying corrected 3500 and SeqStudio data to the existing age estimation model was as high as observed in the 3130 data.     

Rate and Product Studies in the Solvolyses of Two Cyclic Phosphorochloridate Esters

Kinetic and product studies of the solvolyses of acyclic phosphorochloridates are extended to two cyclic diesters, 2-chloro-1,3,2-dioxaphospholane-2-oxide (1) and 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphorinane-2-oxide (2). Slightly faster solvolyses are observed for 1 than for the acyclic dimethyl phosphorochloridate (3), and 2 solvolyzes somewhat slower than 3. An extended Grunwald–Winstein equation treatment shows similar sensitivities to changes in solvent nucleophilicity and solvent ionizing power for 1, 2, and 3, and a concerted S_N2 attack is proposed in each case. Product studies for the solvolyses of 2 in aqueous alcohols are presented.