Experimental identification of physical parameters of fluid-filled pipes using acoustical signal processing

A method is formulated for the identification of an unknown physical parameter of a fluid-filled pipe using the measurement of sound speed in the pipe. The method uses a simple formula which provides the relationship between the sound speed and a few physical parameters of the pipe: thickness, diameter, wall material constants and fluid constants. Once the sound speed in the pipe is measured, the simple formula can be used to extract one of the unknown parameters providing the remaining ones are known.The sound speed in the pipe is measured using a 3-transducer array. In order to demonstrate the potential of the technique the results of several measurements obtained in a water-filled steel pipe are presented.The required accuracy of the measurement of sound speed and of the specification of known parameters is analysed. The accuracy depends on the unknown parameter which is to be identified. For example, if the pipe thickness is the unknown parameter, the other parameters have to be known within a very narrow margin of error. On the contrary, if the fluid properties have to be identified the needed accuracy of known parameters gets much lower.     

Discontinuous travelling wave solutions for certain hyperbolic systems

In an earlier paper on a malignant cell invasion model (Marchantet al., SIAM J. Appl. Math, 60, 2000) we introduced a novelform of discontinuous travelling wave solution. These solutionscould be studied easily by combining behaviour within a phaseplane with the Rankine–Hugoniot shock conditions, whichdescribe properties (such as the ratio of the jump discontinuitiesto the speed of propagation) that solutions may possess. Theseresults were new for several reasons. The shock conditions relateto hyperbolic equations (which the model is) but were appliedin a travelling wave ordinary differential equation phase planeusing techniques that usually apply to parabolic reaction–diffusionsystems. In addition the solutions possess singular behaviournear several points in the phase plane but in spite of thisthere exists a robust and stable family of physically interestingsolutions. In this paper we discuss two previously studied models, oneof detonation theory and one of angiogenesis. We show that eachof these models also possesses a family of discontinuous travellingwave solutions which was not previously discovered. Of particularinterest is the solution which has a blunt interface at thefront of the invading profile. In all three models it is thissolution that is seen to stably evolve from physically relevantinitial data, and for physically relevant parameter values. This work confirms the robustness of these novel travellingwave solutions and their applicability to a wider range of mathematicalmodelling situations.     

An efficient electrophilic N-amination utilizing in situ generated chloramine under phase transfer conditions

An efficient, one-pot, phase transfer N-amination technology was developed. The protocol utilizes chloramine, an inexpensive and safe electrophilic aminating agent potentially viable for commercial manufacturing.     

A critical review of the chemical kinetics of SF4, SF5, and S2F10 in the gas phase

The gas phase chemical kinetics of SF₄, SF₅, and S₂F₁₀ are reviewed with particular emphasis on relevance to the general problem of the dielectric breakdown of SF₆. Specific reaction systems treated are SF₄ + F₂, SF₅ + SF₅, and the pyrolysis of S₂F₁₀. Computer modeling calculations were carried out to arrive at the best estimates of rate parameters. Based on the results of these calculations, sets of recommended rate parameters are provided. The major discrepancies and problems in establishing the kinetic data base are described. Thermochemical consequences of different model calculations are given.     

On-line arbitrarily vertex decomposable trees

A tree T is arbitrarily vertex decomposable if for any sequence τ of positive integers adding up to the order of T there is a sequence of vertex-disjoint subtrees of T whose orders are given by τ. An on-line version of the problem of characterizing arbitrarily vertex decomposable trees is completely solved here.     

Enumeration of inequivalent irreducible Goppa codes

We consider irreducible Goppa codes over F_q of length qⁿ defined by polynomials of degree r, where q is a prime power and n,r are arbitrary positive integers. We obtain an upper bound on the number of such codes.     

Formation of functional groups on graphite during oxygen plasma treatment

Improved sample wettability was obtained by oxygen plasma functionalization of pyrolytic graphite. The samples were exposed to highly dissociated oxygen plasma with the density of 1 × 10¹⁶ m⁻³, the electron temperature of about 5.5 eV and the density of neutral oxygen atoms of 8 × 10²¹ m⁻³ for 20 s. The surface wettability was measured by a contact angle of water drop. The contact angle dropped from original 112° down to about 1°. The functional groups were detected by XPS analyses. The survey spectrum showed a substantial increase of oxygen concentration on the surface, while high-resolution analyses showed additional oxygen was bonded onto the graphite surface in the form of C-O polar functional group responsible for the increase of the surface energy.     

Students’ Reasoning About One-Object Stochastic Phenomena in an ICT-Environment

This paper focuses on the different ways in which students in lower secondary school (14–16 year olds) experience compound random events, presented to them in the form of combined junctions. A carefully designed ICT environment was developed enabling the students to interact with different representations of such structures. Data for the analysis was gathered from two interview sessions. The analysis of the interaction is based on constructivist principles on learning; i.e. we adopted a student-oriented perspective, taking into consideration the different ways students try to make sense of chance encounters. Our results show how some students give priority to geometrical and physical concerns, and we discuss how seeking causal explanations of random phenomena may have encouraged this. With respect to numerically oriented models a division strategy appears to stand out as the preferred one.