Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxin B1 in cattle feed: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in cattle feed at a possible future European regulatory limit (1 ng/g). The test portion was extracted with acetone-water (85 + 15), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase liquid chromatography (RP-LC) and detected by fluorescence after post column derivatization (PCD) involving bromination. PCD was achieved with either pyridinium hydrobromide perbromide (PBPB), used by 14 laboratories, or an electrochemical cell and addition of bromide to the mobile phase, used by 7 laboratories. Both derivatization techniques were not significantly different when compared by the t-test; the method was statistically evaluated for all laboratories together (bromination and PBPB). The cattle feed samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 21 laboratories in 14 different countries (United States, Japan, and Europe). Test portions were spiked at levels of 1.2 and 3.6 ng/g for aflatoxin B1. Recoveries ranged from 74 to 157%. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 5.9 to 8.7%. The relative standard deviation for reproducibility (RSDR) ranged from 17.5 to 19.6%. The method showed acceptable within- and between-laboratory precision for this matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1. No major differences in RSD were observed, showing that the composition of the feeds was not a factor for the samples tested and that the method was applicable for all materials used.     

Influence of satellite groups on telechelic antimicrobial functions of polyoxazolines

The antimicrobial activity of poly(alkyloxazoline) telechelics with one quaternary N,N-dimethyldodecylammonium (DDA) end group was found to be greatly controlled by the non-bioactive distal end group, the so-called satellite group. In systematic investigations, the nature of the latter groups was varied to explore the mechanism of the satellite effect. To this end, poly(2-alkyl-1,3-oxazoline)s (alkyl = ethyl, methyl) with a DDA-group at the terminating end and varying alkyl, aminoalkyl, and polyphenyloxazoline block satellite groups, have been synthesized. Poly(oxazoline) derivatives with polydispersity indices of 1.06-1.20 and molecular weights from 2,200 to 12,800 g . mol(-1) could be obtained. The macromolecular structures have been confirmed by NMR spectroscopy and ESI-MS measurements. The polymers were investigated with regard to their antibacterial efficiency towards the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacterium Escherichia coli. It was found that the introduction of alkyl chain satellites of 4-10 carbon atoms in length afforded antimicrobial activity of the polymers against both microbes that was about 2-3 times higher than that of the well-known structurally comparable low molecular weight biocide, dodecyltrimethylammonium chloride (DTAC). Based on the antimicrobial effects of the investigated polymers, a mechanism for the satellite effect was proposed.     

Mimicking dye-based functions of natural blue-light photoreceptors by studying photoinduced energy and electron transfer in a pyrene-isoalloxazine(flavin)-phenothiazine triad

An artificial system containing phenothiazine as electron donor, isoalloxazine as flavinoid redox-mediator and pyrene as antenna has been built up in order to model photoinduced energy and electron transfer processes of natural blue-light photoreceptors.     

Gas chromatographic-mass spectrometric analysis of acrylamide and acetamide in cigarette mainstream smoke after on-column injection

A method is described for the simultaneous determination of two short-chained amides, acrylamide and acetamide (classified by the International Agency for Research on Cancer as probable and possible human carcinogens, respectively), in total particulate matter using gas chromatography-on-column injection and mass spectrometric detection. Sample preparation is kept to a minimum, and the proposed analytical procedure proves to be fast, sensitive, and precise. Validation studies show good linearity with a regression coefficient of r2=.000 for both compounds. Quantitation limits are 32 ng/mL for acrylamide and 70 ng/mL for acetamide. In the particulate phase of mainstream smoke from the University of Kentucky Reference Cigarette 2R4F, 2.3 microg/cig acrylamide and 4.7 microg/cig acetamide are found; no acetamide and only .0074 microg/cig acrylamide is found in the gas phase. Possible mechanisms of formation in cigarette smoke are discussed.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Recoverable strain storage capacity of shape memory polyethylene

Shape memory polymers (SMPs) are an important class of smart materials. So far the focus of such polymers was to find suited triggers for various application fields. Thus, the potential of most of these macromolecular networks regarding their maximally storable strain capability was not explored. In this study, the polyethylenes HDPE, LDPE, and ethylene‐1‐octene (EOC) were systematically investigated with respect to their strain storage potential. To achieve maximum strains, the polymers were chemically cross‐linked in such a way that they are at the borderline between thermoplastics and elastomers. All investigated polymers showed higher strain storage than literature reported systems and exhibited excellent shape memory parameters. The highest stored strain was found for networks of EOC with fully recoverable 1400%. Interestingly, this value could not be enlarged by using EOCs with higher molecular weight, which is probably due to increasing content of entanglements as confirmed by Mooney‐Rivlin. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1033–1040     

Nanoparticle Tracking Analysis of Polymer Nanoparticles in Blood Plasma

A successful drug delivery system must overcome complex biological barriers. For particles injected into the blood, one of the first and most critical barriers pertains to blood stability to circulate through the human body. To effectively design drug delivery vehicles, interactions between the particles and blood, as well as the aggregation behavior, must be understood. This work presents a method to analyze particle size and aggregation in blood plasma using a commercially available nanoparticle tracking analysis (NTA) system. As a model system, fluorescently labeled polystyrene nanoparticles are incubated in goat blood plasma and analyzed using NTA. The particles incubated in plasma are found to have a protein corona that is larger than what has been observed by dynamic light scattering (DLS) in diluted plasma. Particles that are decorated with a PEG layer are also found to have large protein coronas in undiluted plasma. Because NTA is based on a unique visualization method, large multicomponent aggregates could be observed and quantified in a manner not feasible with other techniques. PEGylation of the particles is found to decrease the multicomponent aggregation from 1000 ± 200 particles for unmodified to 200 ± 30 particles for 1K PEGylated per 1 × 10⁵ total particles.