Kinetic modelling of the H2---O2 reaction on Pd and of its influence on the hydrogen response of a hydrogen sensitive Pd metal-oxide-semiconductor device

We have established a model for the water forming reaction on Pd in the temperature range 350–475 K. Importantly, the model takes into account the possibility that hydrogen may absorb and adsorb at interface sites on supported Pd catalysts. It is shown that already at modest conditions interface adsorption may significantly affect reaction rates. The model may also be used to quantify the response of a hydrogen sensitive Pd-MOS device during hydrogen sensing in oxygen. In the case of Pd supported on SiO₂, the concentration of interface sites is so low that interface hydrogen adsorption will have only a minor influence on a catalytic reaction. The fact that a Pd-MOS device may be used as a very sensitive hydrogen detector at atmospheric oxygen conditions, despite a steric oxygen blocking of hydrogen dissociation sites, is predicted by the model.     

Solvent extraction procedures combined with back-extraction for trace metal determinations by atomic absorption spectrometry

Metal dithiocarbamate extractions with three different organic solvents (chloroform, freon and 4-methylpentan-2-one) followed by back-extraction with nitric acid are described. The back-extraction is studied in detail and simple rapid procedures are described for each solvent. The dilute nitric acid solution obtained is suitable for use with both flame and electrothermal atomic absorption spectrometry. Quantitative recoveries were obtained for Cd, Cu, Fe, Ni, Pb and Zn. Cobalt could be rapidly back-extracted only from chloroform and freon.     

Mechanically manipulating the DNA threading intercalation rate

The dumbbell shaped binuclear ruthenium complex DeltaDelta-P requires transiently melted DNA in order to thread through the DNA bases and intercalate DNA. Because such fluctuations are rare at room temperature, the binding rates are extremely low in bulk experiments. Here, single DNA molecule stretching is used to lower the barrier to DNA melting, resulting in direct mechanical manipulation of the barrier to DNA binding by the ligand. The rate of DNA threading depends exponentially on force, consistent with theoretical predictions. From the observed force dependence of the binding rate, we demonstrate that only one base pair must be transiently melted for DNA threading to occur.     

Electrical detection of amine ligation to a metalloporphyrin via a hybrid SOI-MOSFET

A close-packed monolayer of zinc 5,10,15,20-tetrakis(3-carboxyphenyl)porphyrin has been prepared and deposited on the thin native oxide covering the surface of an SOI-MOSFET (silicon-on-insulator metal-oxide-semiconductor field effect transistor) using Langmuir-Blodgett techniques. When the device is exposed to amine vapors in a nitrogen atmosphere, the amine coordinates to the zinc atom. The resulting change in electron distribution within the porphyrin leads to a large change in the drain current of the transistor, biased via a back gate. This change is sensitive to both the amount of amine present and the base strength of the amine. Only very small changes in drain current were observed with a monolayer of free base porphyrin or palmitic acid. After exposure to high pyridine concentrations, the device response saturates, but partially recovers after overnight exposure to flowing nitrogen gas. Interestingly, the device response is instantaneously reset by exposure to visible light, suggesting that photode-ligation occurs. An electrical model for the hybrid device that describes its response to ligand binding in terms of a change in the work function of the porphyrin monolayer has been developed. A transistor response to a few hundred attomoles of bound pyridine can be readily detected. This extreme sensitivity, coupled with the ability to reset the device using light, suggests that such systems might be useful as sensors.     

A phosphotyrosine-imprinted polymer receptor for the recognition of tyrosine phosphorylated peptides

Hyperphosphorylation at tyrosine is commonly observed in tumor proteomes and, hence, specific phosphoproteins or phosphopeptides could serve as markers useful for cancer diagnostics and therapeutics. The analysis of such targets is, however, a challenging task, because of their commonly low abundance and the lack of robust and effective preconcentration techniques. As a robust alternative to the commonly used immunoaffinity techniques that rely on phosphotyrosine(pTyr)-specific antibodies, we have developed an epitope-imprinting strategy that leads to a synthetic pTyr-selective imprinted polymer receptor. The binding site incorporates two monourea ligands placed by preorganization around a pTyr dianion template. The tight binding site displayed good binding affinities for the pTyr template, in the range of that observed for corresponding antibodies, and a clear preference for pTyr over phosphoserine (pSer). In further analogy to the antibodies, the imprinted polymer was capable of capturing short tyrosine phosphorylated peptides in the presence of an excess of their non-phosphorylated counterparts or peptides phosphorylated at serine.     

Complex DNA binding kinetics resolved by combined circular dichroism and luminescence analysis

We recently reported that ruthenium complexes, with general structure [mu-bidppz(bipy)4Ru2](4+) (B) or [mu-bidppz(phen)4Ru2](4+) (P) (bidppz=11,11'-bi(dipyrido[3,2- a:2',3'-c]phenazinyl)), show extreme kinetic selectivity for long AT tracts over mixed-sequence calf thymus DNA (ct-DNA), a selectivity that also varies markedly with the size (between B and P) and sense of chirality of the complex. Earlier studies, exploiting the great increase in luminescence intensity when the compound intercalates, have yielded complex kinetics indicating the presence of both first- and second-order processes. Even with a homogeneous DNA sequence, such as poly(dAdT)2, the luminescence kinetics generally requires more than a single exponential for a satisfactory fit. We here reveal that at least part of the complexity is a result of the extreme sensitivity of the effective quantum yield of the complexes, so that the luminescence trajectories also reflect subtle variations in the environment and binding geometry that the complex is sampling on its path to its final binding site. By monitoring the rearrangement process using circular dichroism (CD), we show that threading of both enantiomers of B and P into poly(dAdT)2 is effectively a monoexponential process, as expected if the compounds are not affecting each other during the intercalation process. Thus, the complex luminescence trajectories may be explained by slow relaxations in the binding geometry (DNA conformation) and associated changes in the environment of the entering complexes. To further disentangle the intriguing features of the threading intercalation kinetics, and how they may depend on the flexibility and size of the ruthenium complexes, we have also designed and studied two new ruthenium complexes, [mu-dtpf(phen)4Ru2](4+) (F) (dtpf=4,5,9,12,16,17,21,25-octaaza-23 H-ditriphenyleno[2,3-b:2,3-h]fluorene), in which the bridging ligand is made totally rigid, and [mu-bidppz([12]aneS4) 2Ru2](4+) (S), which has less bulky, nonaromatic ancillary ligands. The threading of F into poly(dAdT)2, also found to be a monoexponential process, is about 3 times slower than for P, indicating that the flexibility of the bridging ligand is an important factor for the intercalation rate. Surprisingly, in contrast to all other compounds, S requires two exponentials to fit its binding kinetics as monitored by CD. Also surprisingly, in view of the smaller steric bulk, even the fastest phase is roughly 2 times slower for S than for B and P. Thus, not only the size of the ancillary ligand but also other properties that can influence the energy landscape of the threading path are rate-determining factors. With mixed-sequence ct-DNA, threading of B and that of P are both multiphasic processes when monitored with CD as well as with luminescence. The rate constants for threading into ct-DNA show much larger variations between complexes than for poly(dAdT)2, confirming earlier results based on luminescence data.     

Control of electron transfer in a conjugated porphyrin dimer by selective excitation of planar and perpendicular conformers

A donor-acceptor system is presented in which the electron-transfer rates can be sensitively controlled by means of excitation wavelength and temperature. The electron donor is a butadiyne-linked zinc porphyrin dimer that is connected to a C(60) electron acceptor. The broad distribution of conformations allowed by the butadiyne linker makes it possible to selectively excite perpendicular or planar donor conformers and thereby prepare separate initial states with driving forces for electron transfer that differ by almost 0.2 eV. This, as well as significant differences in electronic coupling, leads to distinctly different rate constants for electron transfer, which in consequence can be controlled by changing excitation wavelength. By extending the system with a secondary donor (ferrocene), a second, long-range charge-separated state can be formed. This system has been used to test the influence of conformational heterogeneity on electron transfer mediated by the porphyrin dimer in the ground state. It was found that if the dimer is forced to a planar conformation by means of a bidentate ligand, the charge recombination rate increased by an order of magnitude relative to the unconstrained system. This illustrates how control of conformation of a molecular wire can affect its behaviour.     

Binding geometry and photophysical properties of DNA-threading binuclear ruthenium complexes

The DNA binding conformation and the photophysical properties of the semiflexible binuclear ruthenium complex [micro-bidppz(phen)4Ru2]4+ (2) were studied with optical spectroscopy and compared to the rigid, planar homologue in syn conformation [micro-dtpf(phen)4Ru2]4+ (3) and the parent "light-switch" complex [Ru(phen)2dppz]2+ (1). Comparison of calculated and observed absorption bands of the bridging ligand, bidppz, confirm earlier suggestions that 2 is significantly nonplanar, both free in solution and when intercalated into poly(dAdT)2, but the conclusion that the intercalated conformation is an anti rotamer is not substantiated by comparison of linear and circular dichroism spectra of 2 and 3. The behavior of the emission quantum yield as a function of temperature is similar for the two binuclear complexes 2 and 3 in different protic solvents, and a quantitative analysis suggests that, in solution, the solvent is more strongly hydrogen bonded to the excited state of 2 than to 1. However, the observation that for 2 the radiative rate constant increases to a value similar to 1 upon intercalation into DNA suggests that the difference between 1 and 2 in accepting hydrogen bonds is less pronounced when intercalated.     

Application and Structural Analysis of Triazole-Bridged Disulfide Mimetics in Cyclic Peptides

Ruthenium-catalysed azide–alkyne cycloaddition (RuAAC) provides access to 1,5-disubstituted 1,2,3-triazole motifs in peptide engineering applications. However, investigation of this motif as a disulfide mimetic in cyclic peptides has been limited, and the structural consequences remain to be studied. We report synthetic strategies to install various triazole linkages into cyclic peptides through backbone cyclisation and RuAAC cross-linking reactions. These linkages were evaluated in four serine protease inhibitors based on sunflower trypsin inhibitor-1. NMR and X-ray crystallography revealed exceptional consensus of bridging distance and backbone conformations (RMSD<0.5 Å) of the triazole linkages compared to the parent disulfide molecules. The triazole-bridged peptides also displayed superior half-lives in liver S9 stability assays compared to disulfide-bridged peptides. This work establishes a foundation for the application of 1,5-disubstituted 1,2,3-triazoles as disulfide mimetics.