Freon (CHF<Subscript>3</Subscript>)-assisted atomization for the determination of titanium using ultrasonic slurry sampling–graphite furnace atomic absorption spectrometry (USS–GFAAS): a simple and advantageous method for solid samples

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min^–1 (5% of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min^–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g^–1 to 12% (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.     

A new family of sequence-specific DNA-cleaving agents directed by triple-helical structures: benzopyridoindole-EDTA conjugates

Sequence-specific DNA recognition can be achieved by oligonucleotides that bind to the major groove of oligopyrimidine x oligopurine sequences. These intermolecular structures could be used to modulate gene expression and to create new tools for molecular biology. Here we report the synthesis and biochemical characterization of triple helix-specific DNA cleaving reagents. It is based on the previously reported triplex-specific ligands, benzo[e]pyridoindole (BePI) and benzo[g]pyridoindole (BgPI), covalently attached to ethylenediaminotetraacetic acid (EDTA). In the presence of iron, a reducing agent and molecular oxygen, BgPI-EDTA x FeII but not BePI-EDTA x FeII induced a double-stranded cut in a plasmid DNA at the single site where a triplex-forming oligonucleotide binds. At single nucleotide resolution, it was found that upon triplex formation BePI-EDTA x FeII led to cleavage of the pyrimidine strand and protection of the purine strand. BgPI-EDTA x FeII cleaved both strands with similar efficiency. The difference in cleavage efficiency between the two conjugates was rationalized by the location of the EDTA x FeII moiety with respect to the grooves of DNA (major groove: BePI-EDTA x FeII, minor groove: BgPI-EDTA x FeII). This work paves the way to the development of a new class of triple helix directed DNA cleaving reagents. Such molecules will be of interest for sequence-specific DNA cleavage and for investigating triple-helical structures, such as H-DNA, which could play an important role in the control of gene expression in vivo.     

Highly stereoselective and efficient total synthesis of (+)-laurencin

A highly stereoselective and efficient asymmetric total synthesis of (+)-laurencin (1) has been accomplished from the known oxazolidinone 5 in 15 steps. The route features an efficient internal alkylation to form oxocene 3 from 4 and a novel use of acetonitrile anion as a two-carbon acetaldehyde equivalent for direct synthesis of ketone 2 from alpha-alkoxy amide 3.     

Planar and tubular perovskite-type membrane reactors for the partial oxidation of methane to syngas

Dense planar and tubular oxygen separation membranes of La_0.6Ca_0.4Fe_0.75Co_0.25O_3– were investigated as reactors for the partial oxidation (POX) of methane to syngas. Their permeation properties were measured in an air/argon pO₂ gradient as a function of temperature. At 900 °C, the oxygen flux through a 1.26-mm-thick membrane was 0.075 mol/cm²·s and through a 0.25-mm-thick tube, 0.24 mol/cm²·s.For the POX measurements, a catalyst was added to the membrane and methane was introduced on the argon side. This resulted in a gradual increase of the oxygen flux with increasing concentration of methane, reaching 2 mol/cm²·s at 900 °C with pure methane. For the planar reactor, the CO selectivity reached 99% and the CH₄ conversion 75% at 918 °C with pure methane. For the tubular reactor, the CO selectivity and CH₄ conversion were 83 and 99%, respectively, under the same conditions. After 1,400 h of operation in a tubular POX reactor, the membrane was examined revealing phase demixing and local decomposition.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Analysis of Toxic Aluminium Species in Natural Waters

Aluminium is known to be toxic to a wide range of aquatic organisms under certain conditions. Monomeric hydroxy ions have been found to be primarily responsible for aluminium aquatic toxicity.A survey of aluminium toxicity and a brief discussion of speciation schemes are presented. The fast reaction of Al³⁺ with pyrocatechol violet (PCV) followed by spectrophotometric analysis is a frequently used method for aluminium speciation. By using a flow system, one obtains fairly exact and reproducible control of the reaction time, and as a result it provides a direct method of analysis for free aluminium (including inorganic monomeric aluminium).The PCV-method has been adapted for the determination of aluminium in carbonate-rich natural waters using an improved buffering system. Thus it is possible to monitor aluminium concentrations in lake water as well as in pore water of the sediments of eutrophicated hardwater lakes that has been treated with aluminium salts as a restoration measure.     

Mechanism of [M + H]<Superscript>+</Superscript> formation in photoionization mass spectrometry

In this paper we examine the mechanism of [M + H]+ (henceforth MH+) formation by direct photoionization. Based on comparisons of the relative abundance of M+ and MH+ ions for photoionization of a variety of compounds M as vapor in air versus in different solvents, we conclude that the mechanism is M + hnu --> M+ + e- followed by the reaction M+ + S --> MH+ + S(-H). The principal evidence for molecular radical ion formation M+ followed by hydrogen atom abstraction from protic solvent S are: (1) Nearly exclusive formation of M+ for headspace ionization of M in air, (2) significant relative abundance of MH+ in the presence of protic solvents (e.g., CH3OH, H2O, c-hexane), but not in aprotic solvents (e.g., CCl4-), (3) observation of induced equilibrium oscillations in the abundance of MH+ and M+, and (4) correlation of the ratio of MH+/M+ to reaction length in the photoionization source. Thermodynamic models are advanced that explain the qualitative dependence of the MH+/M+ equilibrium ratio on the properties of solvent S and analyte M. Though the hydrogen abstraction reaction is endothermic in most cases, it is shown that the equilibrium constant is still expected to be much greater than unity in most of the cases studied due to the very slow reverse reaction involving the very low abundant MH+ and S(-H) species.     

A new strategy for the synthesis of pendant benzodiazacoronands and their use as components of chromatographic stationary phases

The synthesis of a novel class of functionalized benzophanes in which a (2′-hydroxy)ethoxy pendant arm is attached to the phenyl ring is reported. The reported approach, utilizes simple starting materials, and skillful organization of the synthetic steps allows for simultaneous transforms of the macrocyclic ring and the pendant arm. Binding studies of these systems with Pd²⁺ and Cd²⁺ cations is described. A chromatographic stationary phase containing the benzodiazacoronand moiety was also synthesized, and found to interact specifically with isomeric nitrobenzene derivatives.     

Sustainable Processes Employing Ionic Liquids for Secondary Alcohols Separation

Secondary chiral alcohols are very attractive intermediates in organic synthesis of pharmaceutical and the fine-chemical industries. The processes employing ionic liquids to obtain enantiomers of secondary alcohols have become sustainable. Furthermore, physico-chemical properties of ionic liquids opened new possibilities to design “solvent free” processes for the resolution of racemic secondary alcohols. This review is aimed to highlight some of the most important achievements in resolution of secondary alcohols.     

Selective influencing of the migration time of SO4(2-) by forming neutral species with Pb2+ in capillary zone electrophoresis.

Organic and inorganic anions are analyzed using capillary zone electrophoresis with indirect fluorescence detection. As electrolyte 2,5-dihydroxybenzoic acid is used. By adding Pb2+ to the electrolyte the migration time of SO4(2-) can be selectively influenced and the separation of Cl- and SO4(2-) considerably improved. The fluorescence intensity of 2,5-dihydroxybenzoic acid increases in the presence of Pb2+ up to a concentration of 6*10(-4) mol/L Pb2+. Limits of detection in the lower mumol/L range were obtained.     

The effect of pH on the reactions of catalytically important RhI complexes in aqueous solution: reaction of [RhCl(tppms)3] and trans-[RhCl(CO)(tppms)2] with hydrogen (TPPMS = mono-sulfonated triphenylphosphine).

Hydrolysis and hydrogenation of [RhCl(tppms)3] (1) and trans-[RhCl(CO)(tppms)2] (2) was studied in aqueous solutions in a wide pH range (2 < pH < 11) in the presence of excess TPPMS (3-diphenylphosphinyl-benzenesulfonic acid sodium salt). In acidic solutions hydrogenation of 1 yields a mixture of cis-mer- and cis-fac-[RhClH2(tppms)3] (3a,b) while in strongly basic solutions [RhH(H2O)(tppms)3] (4) is obtained, the midpoint of the equilibrium between these hydride species being at pH 8.2. The paper gives the first successful 1H and 31P NMR spectroscopic characterization of a water soluble rhodium(I)-monohydride (4) bearing only monodentate phosphine ligands. Hydrolysis of 2 is negligible below pH 9 and its hydrogenation results in formation of [Rh(CO)H(tppms)3] (5), which is an analogue to the well known and industrially used hydroformylation catalyst [Rh(CO)H(tppts)3] (6) (TPPTS = 3,3',3'-phosphinetriyltris(benzenesulfonic acid) trisodium salt). It was shown by pH-potentiometric measurements that formation of 5 is strongly pH dependent in the pH 5-9 range, this gives an explanation for the observed but previously unexplained pH dependence of several hydroformylation reactions. Conversely, the effect of pH on the rate of hydrogenation of maleic and fumaric acid catalyzed by 1 in the 2 < pH < 7 range can be adequately described by considering solely the changes in the ionization state of these substrates. All these results warrant the use of buffered (pH-controlled) solutions for aqueous organometallic catalysis.