Mechanistic evaluation of the halocyclization of 4-penten-1-ol by some Bis(2-substituted pyridine) and Bis(2,6-disubstituted pyridine)bromonium triflates

The halocyclization reaction of 4-penten-1-ol mediated by various bis(2-substituted pyridine) and (2,6- disubstituted pyridine)bromonium triflates (P(2)Br(+)OTf(-)) was investigated to determine the influence of the substituents on the mechanism of reaction. In all cases, the reaction proceeds via a two-step process where the starting P(2)Br(+) reversibly dissociates to a reactive monosubstituted PBr(+), which then is captured by 4-penten-1-ol to form halocyclized product (2-bromomethyltetrahydrofuran). The dissociation rate constant of P(2)Br(+) (k(d)) is sensitive to the steric bulk at the 2- and 6-positions, and in the case of the 2, 6-dicyclohexylpyridine or 2,6-dicyclopentylpyridine, the P(2)Br(+) species are too unstable to isolate. The partitioning ratio of the reactive intermediate (PBr(+)) between reversal and product formation (k(-)(d)/k(2)) is not particularly sensitive to the nature of the pyridine, the limiting values being 3-7 except in the case of bis(2(-)-menthylpyridine)bromonium triflate where the k(-)(d)/k(2) ratio is approximately 80. The reaction of 4-penten-1-ol and its OD isotopomer with bis(lutidine)bromonium triflate was investigated to determine the deuterium kinetic isotope effect (dkie) on the bromocyclization reaction. The (k(-)(d)/k(2))(H/D) ratio is 1.0, indicating that the rate-limiting step for the bromocyclization is probably formation of a PBr(+)-4-penten-1-ol complex which does not involve substantial changes in the bonding of the OH. The cyclization of 4-penten-1-ol and 4-pentenoic acid mediated by bis(2(-)-menthylpyridine)bromonium triflate produces an enantiomeric excess in the cyclized products of only 2.4% and 4.8% respectively.     

Ring-opening Polymerization of e-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.     

六氰合铁酸铜钴在蜡浸石墨电极表面的电化学沉积

首次报道了电化学沉积的混合金属六氰合铁酸盐修饰电极作为电流型传感器的研究。针对六氰合铁酸盐修饰电极在中性和碱性条件下的不稳定性，采用混合金属电沉积的方法，成功地提高了电极的稳定性，所得到的修饰电极在 ｐＨ ４～１０之间均表现出良好的稳定性。该电极的响应时间（ｔ９５％）为 ０．５ｓ，并对Ｆｅ３＋／Ｆｅ２＋电对表现出良好的电催化作用。催化氧化峰电流与Ｆｅ２＋的浓度在１．０×１０－４～６．５×１０－２ｍｏｌ/Ｌ范围内呈很好的线性关系，检测下限为 １．４×１０－６ｍｏｌ／Ｌ。     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Determination of residual levels of unsaturation in partially hydrogenated poly(2,3-diphenyl-1,3-butadiene) using TG

The thermal degradation characteristics of head-to-head poly(styrene) [HHPS] should provide insight with respect to the impact of head-to-head placement on the thermal stability of traditional atactic head-to-tail polymer [HTPS]. The synthesis of head-to-head poly(styrene) must be accomplished indirectly. The head-to-head polymer is most satisfactorily obtained by dissolving metal reduction of poly(2,3-diphenyl-1,3-butadiene) [PDBD] generated by radical polymerization of the corresponding diene monomer. Full saturation of the polymer mainchain requires several iterations of the reduction procedure. Since the decomposition of poly(2,3-diphenyl-1,3-butadiene) is prominent at 374°C and that for head-to-head poly(styrene) is similarly facile at 406°C, it seemed feasible that TG of partially hydrogenated PDBD might be utilized as a convenient means of monitoring the extent of hydrogenation. This has been demonstrated for various levels of unsaturation remaining - from approximately 90 to less than 10%. Within this range the peak areas from the DTG plots of the partially hydrogenated polymer provide a good reflection of the ratio of unsaturated to saturated units in the polymer. Even low levels of unsaturation in the polymer may be detected by the asymmetry of the decomposition peak for the polymer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Diels-Alder reactions of quinol lactones: a change of regioselectivity with stannic chloride catalysis

Lewis acid-mediated Diels-Alder reactions of quinol lactone 2 gave regioselectivity opposite to that of the uncatalyzed reaction. Compound 12 is proposed as the reactive intermediate generated by the reaction of 2 with stannic chloride.     

Correlation and response functions with non-Markovian dissipation: a reduced Liouville-space theory

Based on a recently developed quantum dissipation formulation [R. X. Xu and Y. J. Yan, J. Chem. Phys. 116, 9196 (2002)], we present a reduced Liouville-space approach to evaluate the response and correlation functions of dissipative systems. The weak system-bath interaction is treated properly for its effects on the initial state, the evolution, and the correlation between coherent driving and non-Markovian dissipation. Numerical demonstration shows this correlated effect cannot be neglected even in the calculation of linear response quantities that do not explicitly depend on external fields. Highlighted in this paper is also the proper choice of theory among various formulations in the weak system-bath interaction regime.     

A highly enantioselective hetero-Diels-Alder reaction of aldehydes with Danishefsky's diene catalyzed by chiral titanium(IV) 5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol complexes

The catalytic effect of chiral Lewis acids on the hetero-Diels-Alder reaction between aldehydes and Danishefsky's diene (1) has been investigated. A variety of combinations of different ligands and Lewis acids have been examined as catalysts for the hetero-Diels-Alder reaction between benzaldehyde and 1, and it has been found that the readily accessible Ti(IV)-H(8)-BINOL (TiHBOL) complex is a very effective catalyst for the reaction, leading to products with very high enantioselectivity (up to 99% ee) and yield (92%). The hetero-Diels-Alder reaction of other aldehydes with 1 under the catalysis of TiHBOL is a general reaction which proceeds well with very high enantioselectivity and isolated yield for various aldehydes at 0 degrees C to room temperature. Based on the experimental results, the proposed mechanism of the hetero-Diels-Alder reaction and the dihedral angle effects of ligands are discussed.     

Importance of van der Waals Interactions in QM/MM Simulations

The importance of accurately treating van der Waals interactions between the quantum mechanical (QM) and molecular mechanical (MM) atoms in hybrid QM/MM simulations has been investigated systematically. First, a set of van der Waals (vdW) parameters was optimized for an approximate density functional method, the self-consistent charge-tight binding density functional (SCC-DFTB) approach, based on small hydrogen-bonding clusters. The sensitivity of condensed phase observables to the SCC-DFTB vdW parameters was then quantitatively investigated by SCC-DFTB/MM simulations of several model systems using the optimized set and two sets of extreme vdW parameters selected from the CHARMM22 forcefield. The model systems include a model FAD molecule in solution and a solvated enediolate, and the properties studied include the radial distribution functions of water molecules around the solute (model FAD and enediolate), the reduction potential of the model FAD and the potential of mean force for an intramolecular proton transfer in the enediolate. Although there are noticeable differences between parameter sets for gas-phase clusters and solvent structures around the solute, thermodynamic quantities in the condensed phase (e.g., reduction potential and potential of mean force) were found to be less sensitive to the numerical values of vdW parameters. The differences between SCC-DFTB/MM results with the three vdW parameter sets for SCC-DFTB atoms were explained in terms of the effects of the parameter set on solvation. The current study has made it clear that efforts in improving the reliability of QM/MM methods for energetical properties in the condensed phase should focus on components other than van der Waals interactions between QM and MM atoms.