Preparation of nanometer FeCuP alloy and its application in decomposition of PH3

A new ternary Fe-based alloy catalyst FeCuP applied to decompose PH_3 was prepared with low-cost material by chemical reduction deposition method.The properties of it were characterized by XRD,ICP and SEM.Its catalytic activity on the decomposition of PH_3 and the decomposition conditions were studied.FeCuP alloy exhibits high thermal stabilities and high catalytic activity.Using it as catalyst,the decomposition temperature of phosphine decreases from over 800℃to 400-500℃.The decomposition rate of phosphine achieved 100%.     

Cyanex301的纯化及其特性

研究了用Ｃｙａｎｅｘ３０１［ＴＭ］铵盐在苯中重结晶以纯化Ｃｙａｎｅｘ３０１的方法，该法收率６２．４％，产品纯度＞９９％。测定了经纯化后产品的红外光谱，研究了纯化产品在－水正庚烷体系中的分配平衡及其在正庚烷中的缔合，浓度在０．２～１．０ｍｏ１／Ｌ范围，Ｃｙａｎｅｘ３０１主要以二聚形式存在。     

Development of a quantitative method for determination of acrylamide in infant powdered milk and baby foods in jars using isotope dilution liquid chromatography/electrospray ionization tandem mass spectrometry

An improved method has been developed for the determination of acrylamide in infant powdered milk and baby foods in jars, a particular class of foodstuffs which represent an important source of nutrition for young infants and babies. This method uses isotope dilution liquid chromatography coupled to a tandem mass spectrometer with electrospray ionization and is significantly more sensitive than previous published methods with a limit of quantification estimated at 1 microg kg(-1). The new method offers effective sample preparation procedures including defatting with petroleum ether, extraction with aqueous solution of sodium chloride, further liquid-liquid extraction with ethyl acetate and clean-up by solid-phase extraction (SPE) with HLB 200 mg cartridges. The analytical method was well validated and good results were obtained with respect to repeatability (RSD < 5%) and recovery (86-97%) which fulfilled the requirements defined by European Union (EU) legislation. The acrylamide level in infant powdered milk and baby foods in jars were 3.01-9.06 microg kg(-1) and 6.80-124.93 microg kg(-1), respectively. Especially, this new method is successfully applied to the trace quantification of acrylamide in infant/baby foods, the content of which is less than 10 microg kg(-1).     

Sensitive detection of a plant virus by electrochemical enzyme-linked immunoassay

The electrochemical enzyme-linked immunoassay increases the sensitivity of the detection of cucumber mosaic virus (CMV) by 5-fold compared with the spectrophotometric o-phenylenediamine (OPD) enzyme-linked immunosorbent assay (ELISA). The detection limit for the purified CMV is 1.0 ng/mL and the highest dilution ratio of the infected leaf sap is 1:5.0 x 10(4). The method is based on coupling the oxidation reaction of o-aminophenol (OAP)-H2O2 catalyzed by HRP-IgG conjugate with the electro-reduction of the enzymatic product. The enzymatic product 2-aminophenoxazine-3-one exhibits a sensitive second order derivative linear-sweep voltammetric response at the potential of -0.65 V (vs. Ag/AgCl) in pH 8.0 Britton-Robinson (B-R) buffer solution. So it can be applied to the detection of the plant virus with highly improved sensitivity.     

Electrochemical studies on the interaction of heparin with crystal violet and its analytical application

In this paper, crystal violet (CV) was used to determine heparin concentration by linear sweep voltammetry on a dropping mercury electrode (DME). In Britton-Robinson (B-R) buffer solution, pH 3.0, CV had a well-defined second-order derivative linear sweep voltammetric reductive wave at −0.74 V (vs. SCE). After the addition of heparin to the CV solution, the reductive peak current decreased greatly with the positive movement of the peak potential and without appearance of new peaks in the scanning potential range. Based on the decrease in the reductive peak current, a new voltammetric method for the determination of heparin was established. The conditions for the interaction and the electrochemical detection were optimized, and interfering substances were investigated. Under the optimal conditions, the decrease in reductive peak currents of CV was proportional to heparin concentration in the range 0.1–8.0 mg/L with the linear regression equation Δip″(nA) = 400.42 + 1563.11c (mg/L), (n = 14, γ = 0.993). The detection limit was 0.092 mg/L. This new method was further successfully applied to the determination of heparin content in heparin sodium injection samples with satisfactory results. The binding ratio and binding mechanism were also studied by the electrochemical method. The text was submitted by the authors in English.     

Pt微粒修饰纳米纤维聚苯胺电极对甲醇氧化电催化

以脉冲电流法制备的纳米纤维状聚苯胺(PANI)为Pt催化剂载体，用它制备了甲醇阳极氧化的催化电极Pt/（nano-fibular PANI）.研究结果表明, Pt/（nano-fibular PANI）电极对甲醇氧化具有很好的电催化活性,并有协同催化作用.在相同的Pt载量条件下， Pt/（nano-fibular PANI）电极比Pt微粒修饰的颗粒状聚苯胺电极Pt/(granular PANI)具有更好的电催化活性.此外， Pt的电沉积修饰方法同样影响Pt/（nano-fibular PANI）电极对甲醇氧化的催化活性.脉冲电流法沉积Pt形成的复合电极较循环伏安法电沉积得到的Pt复合电极具有更优异的催化活性.     

SYNTHESIS OF DERIVATIVES OF 3-β-D-XYLOPYRANOSYL-1,2,4-OXADIAZOLES

The synthesis of derivatives of 3-β-D-xylopyranosyl-1,2,4-oxadiazolesis accomplished by condensing protected β-D-xylopyranosyl amidoxime with acidanhydrides or various substituted benzoyl chlorides in good yield.Thestructures of now derivatives were identified by spectra and elemental analysis.The stability of 1,2,4-oxadiazole ring and mechanism of cyclization were.investigated.     

Theoretical studies on the smallest fullerene: from monomer to oligomers and solid States

Hybrid B3LYP and density-functional-based tight-binding (DFTB) computations on the solid-state structures and electronic properties of the C(20) fullerene monomer and oligomers are reported. C(20) cages with C(2), C(2h), C(i), D(3d), and D(2h) symmetries have similar energies and geometries. Release of the very high C(20) strain is, in theory, responsible for the ready oligomerization and the formation of different solid phases. Open [2+2] bonding is preferred both in the oligomers and in the infinite one-dimensional solids; the latter may exhibit metallic character. Two types of three-dimensional solids, the open [2+2] simple cubic and the body-centered cubic (bcc) forms, are proposed. The energy of the latter is lower due to the better oligomer bonding. The open [2+2] simple cubic solid should be a conductor, whereas the bcc solids are insulators. The most stable three-dimensional solid-state structure, an anisotropically compressed form of the bcc solid, has a HOMO-LUMO gap of approximately 2 eV and a larger binding energy than that of the proposed C(36) solid.     

Electron impact mass spectral fragmentation of chiral bisbenzoxazole,bisbenzothiazole and biscarbamide derivatives of 2,2-dimethyl-1,3-dioxolane

The mass spectrometric fragmentation behaviour of five pairs of (R,R)- and (S,S)-4,5-bis(benzoxazol-2-yl)-2,2-dimethyl-1,3-dioxolane derivatives, one pair of (R,R)- and (S,S)-4,5-bis(benzothiazol-2-yl)-2,2-dimethyl-1,3-dioxolanes, and three pairs of (R,R)- and (S,S)-N,N'-bis(2-hydroxyaryl)-2,2-dimethyl-1,3-dioxolane-4,5-dicarbamides, all important compounds for asymmetric catalysis (P. Jiao et al., Tetrahedron Asymmetry 2001; 12: 3081), has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization conditions. The spectral observations have been rationalized in terms of fragment ion structures and fragmentation mechanisms that will provide an aid to spectral interpretation for new compounds of this type.     

Au nanoparticle micropatterns prepared from self-assembled films

A kind of hybrid multilayer film based on mercaptobenzoic acid-capped Au nanoparticles (MBA-Au-NPs) and photoreactive nitrodiazoresin (NDR) has been fabricated via electrostatic self-assembly. Upon exposure to UV light, the initial ionic bonds between the layers of the film convert into covalent bonds and the film stability toward polar solvents, salt, or surfactant solutions increases significantly. The micropatterned NDR/MBA-Au-NP film with the covalently linked architecture was formed by selecting exposure of the film through a photomask and later developed in sodium dodecyl sulfate (SDS) aqueous solution. The metallic Au-NP micropatterns, furthermore, are produced by sintering the micropatterned NDR/MBA-Au-NP film at 550 degrees C, at which the organic components are removed completely. The well-defined micropatterns were characterized with atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), microscope with a charge-coupled device (CCD) camera, and X-ray photoelectron spectroscopy (XPS).