柱前衍生法在氨基酸分析测定中的应用

介绍了目前柱前衍生法分析氨基酸常用的几类衍生试剂及相应的衍生方法，并且比较了各类柱前衍生试剂的优缺点,对近期氨基酸分离分析中的色谱检测方法做了系统综述。     

K2CO3—KOH溶液中Tb（Ⅲ）氧化产物的组成

由于E_(Tb~(4 )/Tb~(3 ))~0= 3.1V,使得Tb(Ⅳ)很难以简单离子的形式存在于水(E_(1/2O_2 2H~ )= 1.22V)溶液中。要从水溶液中获得稳定的Tb(Ⅳ),必须降低其平衡电位,通常采用生成难溶盐、配合物或溶胶等方法。 Tb(Ⅳ)化合物最初多以焙烧法制备。Prost在2.5mol/L K_2CO_3-0.5mol/LKOH溶液中用电化学氧化法制得了Tb(Ⅳ)的聚合物,并求得在此条件下E_(Tb~(4 )/Tb~(3 ))=     

铑配合物的抗肿瘤活性及其作用机制研究

自从Rosenberg等人发现顺铂具有抗肿瘤活性以来，金属配合物的抗肿瘤活性引起了人们的广泛关注。本文综述了近年来铑配合物抗肿瘤活性的研究进展，并对铑配合物的抗肿瘤机制和构效关系进行了探讨，为进一步寻找高效低毒和抗肿瘤谱广的新药物揭示了可循的途径。     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术，成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱。通过调整反应液中不同前体的比例，优化了整体柱的制备条件。通过扫瞄电镜，对柱床进行了表征和分析。实验发现，所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变，在酸性和中性条件下，具有从阴极流向阳极的电渗流；当流动相pH值升至约7．5时，电渗流方向发生了反转（由阳极流向阴极）。在优化的实验条件下，用所制备的整体柱对所考察的酸性（中性）化合物实现了快速分离，并获得了高达160，000N／m的柱效。     

β—型过渡元素三取代钨锗杂多配合物的合成,表征和催化活性

报道Ａ－β－Ｍ＇ｘＨｙ－［ＧｅＷＯＭ３（Ｈ２Ｏ）３Ｏ３７］．ｎＨ２Ｏ（Ｍ＝Ｃｒ＾３＾＋，Ｃｏ＾２＾＋，Ｎｉ＾２＾＋，Ｃｕ＾２＾＋；Ｍ＇＝Ｂｕ４Ｎ＾＋，Ｋ＾＋）的立体有择合成法制备及红外和远红外光谱，紫外和可见光谱和循环伏安，磁化率和磁矩，ＸＰＳ，ＥＳＲ以及催化活性等研究结果。     

循环流化床(CFB)煤/焦气化反应的研究 Ⅰ.操作气速、固体循环速率对循环流化床气化反应的影响

报道了山西西山焦煤飞灰，在小型循环流化床气化反应器上，以二氧化碳为气化介质，在不同操作条件下（气速、固体循环速率）的气化反应。研究结果表明，ＣＯ出口浓度及碳转化率随着ＣＦＢ操作气速减小、固体颗粒循环速率的增加而增加。即在ＣＦＢ床中，提高气体、固体停留时间（床内固体颗粒浓度）有利于ＣＦＢ气化的进行。ＣＯ浓度及碳转化率沿床高的变化趋势与床内颗粒浓度分布一致。     

Host–Guest Complexation of <Emphasis Type="Italic">β</Emphasis>-, <Emphasis Type="Italic">γ</Emphasis>-Cyclodextrin with Alkyl Trimethyl Ammonium Bromides in Aqueous Solution

As a continuation of our previous investigation, interactions between cyclodextrin (β-CD), γ-cyclodextrin (γ-CD) and alkyl trimethylammonium bromides in aqueous solutions have been studied with titration calorimetry and ¹H NMR at 298.15 K. The results are discussed in terms of the amphiphilic interaction of CD with surfactants and the iceberg structure formed by water molecules existing around the hydrophobic tail of surfactant molecules. The stoichiometry of the β-CD–surfactant system is 1:1 whereas that of the γ-CD–surfactant system is 1:2. The corresponding formation enthalpy (negative) of the complexes of the two systems decreases with an increase in the number of carbon atoms (n) in hydrophobic chain of surfactant molecule, C _n H_2n+1, whereas the entropy increases with the enlargement of n.     

Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.