Developing a wireless sensing method for the measurement of gamma radiation dose based on the polymerization of acrylamide

A wireless sensing method for the measurement of gamma radiation dose has been developed based on the fact that gamma rays can initiate the polymerization of acrylamide, which causes an increase in solution viscosity that can be detected with a wireless magnetoelastic sensor. The magnetoelastic sensor is able to wirelessly detect the resonance frequency shifts of a magnetoelastic foil in response to changes in solution viscosity. There is a linear relationship between the resonance frequency shift and gamma radiation dose in the range of 0–50 Gy (under optimal conditions) with a detection limit of 0.25 Gy. This method has the advantage of providing real-time, continuous measurement in situ. The method has been used successfully to determine the gamma radiation dose in real exposure scenarios, with satisfactory results.     

Level crossing in a two-photon Jaynes—Cummings model

In this paper,the energy spectrum of the two-photon Jaynes-Cummings model(TPJCM) is calculated exactly in the non-rotating wave approximation(non-RWA),and we study the level-crossing problem by means of fidelity.A narrow peak of the fidelity is observed at the level-crossing point,which does not appear at the avoided-crossing point.Therefore fidelity is perfectly suited for detecting the level-crossing point in the energy spectrum.     

Switchable different operation states in an erbium-doped fiber laser cavity with normal dispersion

We demonstrate different operation states which can be switched by the polarization control in an erbium-doped fiber laser cavity with normal dispersion, including passive single-pulse and multiple-pulse mode-locking, coherent pulse pattern, and passive Q-switching. The mode-locked single pulse has a smooth and broad rectangular-shaped spectrum. With increasing pump power, multiple pulses appear and finally six pulses are observed, where the pulses have no interaction with each other. Keeping the pump power at 407 mW and adjusting the polarization state, we observe the coherent pulse pattern with the pulse numbers from 2 to 5. It is the first time five coherent pulses in the 1.55 μm normal dispersion cavity have been observed, to our knowledge. The mode-locked spectra are highly modulated and the largest pulse separation of 31.9 ps is observed for the two-pulse case. When the pump power exceeds 180 mW, the mode-locked operation can be switched to the passively Q-switched operation by controlling the polarization state. The repetition rate and pulse width can be changed by pump power variation, and the spectrum is tunable in the range of 8.45 nm.     

Resolution and sensitivity enhancements in strong grating based fiber Fabry–Perot interferometric sensor system utilizing multiple reflection beams

We investigate an asymmetric intensive fiber Bragg grating (FBG) defined Fabry–Perot (F–P) sensor system decoded by a multiple-path-matched Michelson interferometer. The interrogation of higher order reflection beams cannot only solve the problem of the degraded resolution induced by the spectral mismatch of the FBGs, but also amplify the effect of the fiber strain on the phase of the light. We demonstrate multiple reflection beams in the F–P cavity based on the concept of the FBG effective length for constructing respective interrogation interferometers, and present a cost function with optimized system parameters to improve noise properties. The performances of interrogating the second, third and fourth order reflection beams are compared in a strain sensing experiment arrangement. Under the condition of the same optical path length mismatch, the interrogation of the fourth order reflection beam can achieve 9.8 dB sensitivity enhancement and 3 dB resolution promotion compared with the result using the second order reflection beam.     

低光泽度印刷色谱色貌数据组的建立与评价

色貌预测是现代颜色科学领域的基本理论和技术。为了评价低光泽度彩色印刷色谱的色貌,以丽印胶版纸印制的彩色印刷色谱为研究对象,根据颜色科学和心理物理学相关实验,建立其色貌参数样本数据组。采用相对系数R2和差异系数CV等数理统计方法,评价这种印刷色谱中Y-M内页在三种不同的照明光源下色貌的视觉评估结果。实验数据分析表明,在D65、A和TL84三种光源中,人眼在A光源下对颜色的识别能力明显不同于D65和TL84光源;同样在这三种光源中人眼对明度和色调的评估准确度最高,彩度最差。     

基于声光折射的聚焦超声焦点声压检测

提出了一种基于声光折射对聚焦超声焦点声压进行非侵入式检测的方法。当一束直径小于声波长的平行光束入射穿过聚焦超声的焦点时,通过研究焦点声压与光线偏转的具体关系,建立了光线最大偏转距离与焦点声压变化的关系模型,从而计算出焦点峰值声压。为了对理论模型进行验证,采用凹球面型聚焦换能器进行实验研究。通过与采用光纤水听器测量的结果进行对比,证明理论模型的可行性。结果表明实验得到的光斑图像与理论分析的结果一致,且用该方法测得的焦点峰值声压与光纤水听器测量的结果相比,相对误差小于15%,证明该方法具有可行性,能够定量检测焦点峰值声压。模型的提出也为将声光折射效应用于整个聚焦声场的定量检测提供了实验依据和理论依据。     

干涉型光纤法布里-珀罗传感系统抗噪方法的实验研究

对于干涉型光纤法布里-珀罗(FFP)传感系统,外界环境对解调干涉仪的扰动是其主要噪声源之一。在光纤布拉格光栅构成的FFP传感系统中,对比分析了采用参考传感器和参考光源两种抗噪方法。实验结果表明,对于单频和宽带干扰,两种方法均可提高信噪比到40dB。而且由于采用窄线宽光纤激光器作为参考光源的噪声水平较低,其差分探测结果具有更好的抗噪效果。     

Growth evolution and microstructural characterization of semipolar (112̄2) GaN selectively grown on etched r-plane sapphire

Semipolar (112?2) GaN was grown on stripe etched r-plane sapphire substrate by a maskless selective growth method. The initial stage of growth is analyzed by describing the competitive nucleation mechanisms, due to the interplay between kinetics and energetics, on disparate crystallographic planes within the diffusion length of adatoms. The microstructure of the final coalesced semipolar GaN film is revealed by x-ray rocking curve (XRC) analysis and transmission electron microscopy (TEM). XRC analysis yields linewidths between 280 and 550 arcsec for all on-axis and off-axis diffractions. Linewidth broadening factors in dislocated crystals are considered, and a large reduction of stacking fault density can be seen from the measured linewidths as fit to this model. TEM shows a change in the defect characteristics as compared to conventional growth on m-sapphire, filtering of stacking faults and confirmation of the low dislocation density of the final GaN film. The microstructural quality of the film substantiates the possibility of using an inclined basal-plane growth to synthesize non-basal-plane active devices, thus removing the rigid restrictions in contemporary GaN nonpolar and semipolar heteroepitaxy.     

Spirally configured cis-stilbene/fluorene hybrids as bipolar, organic sensitizers for solar cell applications

Hybrids based on a dibenzosuberene core bearing a spiro-fluorene junction at the C-5 position and with amino donor and β-thiophenyl-α-cyanoacrylic acid acceptor groups at C-3 and C-7, respectively, serve as new organic sensitizer materials for solar cell applications. Solar cell devices based on these materials show a conversion efficiency (η) of up to 6.1% (V(oc) = 697 mV, J(sc) = 12.2 mA cm(-2), FF = 0.72) under AM 1.5 G conditions. The best IPCE values exceed 75% within the 450-550 nm absorption range.     

Electrochemically shape-controlled synthesis of trapezohedral platinum nanocrystals with high electrocatalytic activity

Trapezohedral Pt nanocrystals enclosed by 24 high-index {522} facets have been successfully prepared for the first time in high yield by a direct square wave electrodeposition method. They exhibit a significantly enhanced catalytic activity for C-1 molecules (CO, CH(3)OH, HCOOH).