An evaluation of exogenous application of protoporphyrin IX and its dimethyl ester as a photodynamic diagnostic agent in poorly differentiated human nasopharyngeal carcinoma

5-Aminolevulinic acid and its esterified analogues have been under much investigation to enhance the endogenous production of protoporphyrin IX (PpIX) in tumor cells. However, in this work, we studied the in vitro and in vivo efficacy of exogenously administered PpIX and its esterified analogue, PpIX dimethyl ester (PME), in poorly differentiated human nasopharyngeal carcinoma (NPC/CNE-2) as a photodynamic diagnostic (PDD) agent. NPC/CNE-2 at its earliest time, 1 h after incubation with PME in in vitro studies, has exhibited 64% (P <0.01) higher tumor to normal cell (T/N) fluorescence ratio than with PpIX. In an in vivo mouse xenograft model, comparable photosensitizer concentration in tumor after intravenous administration was observed at 1-3 h time points, but at 9 h, PME had 31% (P=0.05) greater concentration in tumor compared with PpIX. In addition, by constituting PME and PpIX in different topical gel composites, of which, PME gel composition of 8:2 Plasdone and Gantrez resulted in the highest T/N ratio at 6 h after application (34%; P <0.05) in comparison with other gel composites. Evaluation of PME and PpIX constituted in the delivery vehicles investigated showed comparable selectivity for tumor at 1-3 h, thus neither photosensitizer is more efficient than the other for PDD at the early time points; however, beyond 6 h, PME had higher selectivity for tumor compared with PpIX. Thus, further investigation is warranted to improve the drug delivery vehicle for greater tumor selectivity at a shorter incubation time.     

Anion-assisted trans-cis isomerization of palladium(II) phosphine complexes containing acetanilide functionalities through hydrogen bonding interactions

The anion-assisted shift of trans-cis isomerization equilibrium of a palladium(II) complex containing acetanilide functionalities brought about by allosteric hydrogen bonding interactions has been established by UV/Vis, 1H NMR, 31P NMR and ESI-MS studies.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

Determination of cadmium in mixtures with metal ions

A method for the determination of cadmium microamounts in mixtures with metallic ions withE _1/2 near toE _1/2 of cadmium is discussed. For higher selectivity cadmium was extracted in the form of the pyridin-thiocyanate complexes prior to polarography.

---

Bestimmung von Cadmium(II) neben anderen Metallionen

Zusammenfassung Es wird eine polarographische Methode zur Bestimmung von Cd(II) neben anderen Metallionen mitE _1/2 naheE _1/2(Cd) diskutiert. Zur Erhöhung der Selektivität und Genauigkeit wird eine Pyridin-Thiocyanat-Extraktion vorgeschalten.

     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

Metallic macrocycle with a 1,3-alternate calix[4]arene phosphorus ligand

The preparation of an 1,3-alternate calix[4]arene phosphorus ligand, 25,27-bis(2-(diphenylphosphino)ethoxy)-26,28-bis(1-propyloxy)calix[4]arene (3), is presented. Ligand 3 is obtained in three steps in 64% overall yield. Reaction of 3 with [Rh(cot)2]BF4 produced the encapsulated rhodium complex [Rh[(P,P)-diphen-calix[4]arene]]BF4 (4). As revealed by a single-crystal X-ray diffraction study, the rhodium center has a bent coordination environment with a P-Rh-P angle of 135.66(3) degrees. Palladation of 3 employing [Pd(MeCN)4](BF4)2 yielded the chelate palladium complex 7 in which the palladium center has a slightly bent configuration. Treatment of the ligand with Pd(cod)Cl2 and [Pd(eta3-C4H7)(THF)2]BF4 leads to the isolation of the monometallic complex. Full characterization includes X-ray structural studies of compounds 3, 4, and 6.     

An efficient synthesis of novel carbocyclic nucleosides with use of ring-closing metathesis from D-lactose

This paper describes an efficient synthetic route for various types of novel carbocyclic nucleosides. The required stereochemistry of the targeted nucleosides was successfully obtained with use of Grubbs cyclization and Trost allylic alkylation from the carbohydrate chiral template "D-lactose".     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Bis induces growth inhibition and differentiation of HL-60 cells via up-regulation of p27

Bis (Bag-3, CAIR), a Bcl-2-interacting protein, promotes the anti-apoptotic activity of Bcl-2 and increased levels of Bis have been observed in several disease models. The involvement of Bcl-2 and some Bcl-2-binding proteins in differentiation has recently been reported. However, the relevance of Bis to cellular differentiation remains unknown. The findings herein show that Bis expression is up-regulated during the differentiation of HL-60 cells. To investigate the effect of Bis expression on differentiation, we established Bis-overexpressing HL-60 cells (HL-60-bis). HL-60-bis cells have a low nuclear: cytoplasmic ratio and indented nucleus in Wright- Giemsa staining, and an increased expression of CD11b in immunofluorescence study, indicating the promotion of differentiation. The overexpression of Bis also resulted in a retarded cell growth rate, accompanied by the accumulation of HL-60 cells at the G0/G1 phase of the cell cycle, which was sustained during the differentiation process. Western blot analysis revealed that the expression of p27, a representative inducer of cell cycle arrest at the G1 phase, was increased 2.5-fold in HL-60-bis cells compared to HL-60-neo cells. These results suggest that the Bis induced growth inhibition of HL-60 cells promotes G0/G1 phase arrest via up-regulation of p27, which seems to be a prerequisite for differentiation. Further studies will be required to define the exact roles of Bis on cellular differentiation more precisely.     

Preconcentration of cadmium by MEUF in sodium dodecylsulphate solutions

The ultrafiltration preconcentration of Cd²⁺ using micellar extraction with 8-hydroxyquinoline (8-HQ), solubilized in anionic micelles of sodium dodecylsulphate (SDS)) were studied. The n-butanol was used as a co-surfactant. Ultrafiltration yields (R, %) on cellulose acetate membranes (wet, 20000 MW-CO) under 400 kPa pressure were determined. Distribution ratios (D) of cadmium between bulk liquid phase and micellar pseudophase were estimated. The constants (app.) for the cadmium-sodium exchange on SDS micelles surface at pH values of 4.8 and 5.3 (3.36 and 3.86, respectively) were determined. It was found, that the values of ultrafiltration yields of the cadmium (at constant concentration of 8-HQ) are influenced not only by the pH and by the concentration values, but also by the ratio of the concentrations of the metal and the anionic surfactant.