Measurement of branching fractions for B-->eta(c)K(*) decays

We report measurements of branching fractions for charged and neutral B-->eta(c)K decays where the eta(c) meson is reconstructed in the K(0)(S)K+/-pi(-/+), K+K-pi(0), K(*0)K-pi(+), and pp; decay channels. The neutral B0 channel is a CP eigenstate and can be used to measure the CP violation parameter sin(2phi(1). We also report the first observation of the B0-->eta(c)K(*0) mode. The results are based on an analysis of 29.1 fb(-1) of data collected by the Belle detector at KEKB.     

Three-dimensional integral imaging with large depth of focus by use of real and virtual image fields

We present an integral imaging method to enhance the depth of a three-dimensional image by displaying it throughout real and virtual image fields. When the product of depth and resolution square of the displayed three-dimensional image is used as a figure of merit in integral imaging systems, our method can maximize this merit especially when three-dimensional images with large depth of focus are displayed. The feasibility of our method is experimentally demonstrated by generation of elemental images by a computer.     

Contents of Volume 64 (2003)

Volume Contents

Contents of Volume 64 (2003)     

Numerical investigation and electro-acoustic modeling of measurement methods for the in-duct acoustical source parameters

It is known that the direct method yields different results from the indirect (or load) method in measuring the in-duct acoustic source parameters of fluid machines. The load method usually comes up with a negative source resistance, although a fairly accurate prediction of radiated noise can be obtained from any method. This study is focused on the effect of the time-varying nature of fluid machines on the output results of two typical measurement methods. For this purpose, a simplified fluid machine consisting of a reservoir, a valve, and an exhaust pipe is considered as representing a typical periodic, time-varying system and the measurement situations are simulated by using the method of characteristics. The equivalent circuits for such simulations are also analyzed by considering the system as having a linear time-varying source. It is found that the results from the load method are quite sensitive to the change of cylinder pressure or valve profile, in contrast to those from the direct method. In the load method, the source admittance turns out to be predominantly dependent on the valve admittance at the calculation frequency as well as the valve and load admittances at other frequencies. In the direct method, however, the source resistance is always positive and the source admittance depends mainly upon the zeroth order of valve admittance.     

Quantitative comparison of kinetic stabilities of metallomacrocycle-based rotaxanes

Four mononuclear metallomacrocycles with identical cavities but different transition metals (Os(VI), Pd(II), Pt(II), and Re(I)) were prepared. With these metallomacrocycles, the corresponding rotaxanes 2-Os, 2-Pd, 2-Pt, and 2-Re were self-assembled by hydrogen-bonding interactions. The kinetic stabilities of the rotaxanes were determined quantitatively and compared with each other by (1)H NMR spectroscopic techniques, including two-dimensional exchange spectroscopy (2D-EXSY) experiments. The activation free energies (DeltaG( not equal )) for the exchange between the rotaxanes 2-Os, 2-Pd and 2-Pt and their free components were determined to be 15.5, 16.0, and 16.4 kcal mol(-1), respectively. These magnitudes imply that the rotaxanes 2-Os, 2-Pd and 2-Pt are kinetically labile at room temperature and exist only as equilibrium mixtures with free components in solution. In contrast, the rotaxane 2-Re is kinetically stable enough to be isolated in pure form by silica gel chromatography under ordinary laboratory conditions. However, at higher temperatures (>60 degrees C) 2-Re was slowly disassembled into its components until the equilibrium was established. The rate constants were measured at three different temperatures, and the Eyring plot yielded the activation enthalpy DeltaH(not equal)=35 kcal mol(-1) and the activation entropy DeltaS(not equal)=27 eu for the disassembly of the rotaxane 2-Re in Cl(2)CDCDCl(2). These thermodynamic parameters gave the activation free energy DeltaG(not equal)(off)=27.1 kcal mol(-1) at 25 degrees C. Consequently, 2-Re is one example of a novel metallomacrocycle-based rotaxane that contains a coordination bond with enough strength to allow both for isolation in pure form around room temperature and for self-assembly at higher temperatures.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Investigation of the transverse beam dynamics in the thermal wave model with a functional method

We investigated the transverse beam dynamics in a thermal wave model by using a functional method. It can describe the beam optical elements separately with a kernel for a component. The method can be applied to general quadrupole magnets beyond a thin lens approximation as well as drift spaces. We found that the model can successfully describe the PARMILA simulation result through an FODO lattice structure for the Gaussian input beam without space charge effects.     

An enhanced common path interference optic measurement system for refractive indices and thickness

This study proposes a common path interference optical system for the measurement of refractive indices and thickness of uniaxial crystal material. The measurement system comprises an accurate Mach–Zehnder laser interferometer, a single-axis rotary stepping motor, and a computer. The laser interferometer is composed of a single-frequency He–Ne laser, two-beam splitters and two reflectors. The Mach–Zehnder laser interferometer measures the optical length difference by using its linear measurement accuracy. The proposed solution procedure enables both the refractive indices and the thickness of the optical waveplate to be obtained. The proposed design differs from conventional designs in that it does not use a heterodyne modulator with a lock-in technique. It is shown that the refractive indices and thickness of the tested optical elements can be measured rapidly and accurately.     

Optical detection of Cu ion using a SQ-dye containing polymeric thin-film on Au surface

In this study, we have fabricated Cu²⁺ ion sensor using a squarylium dye (SQ-dye) containing polymeric thin-film. Surface Plasmon Resonance (SPR) was used as a signal amplifier to achieve high sensitivity and large linear dynamic range for detection of Cu²⁺ ion. High selectivity to Cu²⁺ ion was obtained by the effective electro-static interaction between SQ-dye and Cu²⁺ ion in the polymeric film. The optimal analytical condition of high selectivity and sensitivity in the wider linear dynamic range obtained in this study may be a result of the cooperative ‘hard-soft’ metal ion-ligand interaction and effective detection of refractive index changes by the complexation of Cu²⁺ ion and SQ-dye in SPR measurement. Among 10 different alkali metal, alkaline earth metal, and transition metal ions, SQ-dye in poly(vinylchloride)–poly(vinyl acetate)–poly(vinyl alcohol) (PVC–PVAc–PVA) copolymer film showed the highest selectivity to Cu²⁺ ion. Although the interaction between SQ-dye and metal ions has not been well understood, both cooperative ‘hard-soft’ metal ion-ligand interaction and size-selective recognition of Cu²⁺ ion to SQ-dye may contribute to high selectivity. Furthermore, additional sensitivity in the detection of Cu²⁺ ion by SPR was obtained by matching the wavelength of probing radiation of SPR and absorption maximum of SQ-dye at 675 nm, which allow to detect small changes in the refractive index by complex formation on the sensing surface. This result may apply in development of the Cu²⁺ ion selective sensor for medical, biochemical, and environmental applications.