无机分子纳米材料的研究进展

无机分子纳米材料是至少在一个维度上为纳米尺寸的分子及以其为单元组成的材料。由于其特殊的结构和性质，这种材料可以作为未来纳米分子电子器件、小分子吸附及储存材料。本文将从合成、结构、性质、应用等方面, 结合最新进展对这一充满活力并有着应用前景的领域作一简要概述。     

三硝基苯磺酸离子选择电极的制备和应用

三硝基苯磺酸是氨基酸分析常用试剂,在水溶液中它是稳定的一价阴离子。Sarantonis曾研制液膜型三硝基苯磺酸离子选择电极,间接测定氨基酸的浓度,其电极的线性响应范围为1.1×10~(-1)～5.1×10~(-5)mol·L~(-1)。     

天然产物的酶法结构修饰

为赋予天然产物以新颖和特定的性质，往往需要对其进行结构修饰。结果修饰 可以通过化学法、微生物法和酶法实现。其中酶法由于条件温和，化学、区域和立 体选择性高，操作简便，环境友好等特点而发展非常迅速。本文介绍了糖和糖苷、 甾族化合物、β-内酰胺抗生素、氨基酸和多糖类等的酶法结构修饰，并指出组合 酶催化将成为现有组合化学方法的重要补充。     

一种Λ型吡啶碘盐的合成和晶体结构

A new Λ type pyriding iodide was synthesized by reaction of 4-picoline and methyl diiodide. The structure was characterized by elemental analysis, IR, UV and TG. The crystal structure of the title compound was determined by X-ray single crystal diffraction. The crystal belongs to monoclinic with space group C2/c, a=18.812(4)?, b=8.7816(6)?, c=10.3165(12)?, β=93.71(1), V=1700.7(4)?³, Z=4. In the molecule, two 4-picoline molecules are bonded by -CH₂ group to form Λ type pyridine salt. CCDC: 180871.     

应用大孔吸附树脂从农药废水中回收毕克草

毕克草为一种新型除草剂,通常情况下很难被降解,本文利用物理吸附原理通过自行制备的大孔吸附树脂从农药水中对其进行了回收,回收效果良好,同时也达到了废水处理的目的。优化的最佳实验条件:室温下,pH=1.0以及流速为5BV/h时,对COD为15000mg/L的毕克草废水吸附处理后,其出水可达《污水综合排放标准》(GB89—1996)中的一级排放标准;洗脱再生时,室温下,用95%的乙醇洗脱,流速为2BV/h,(即2倍树脂床体积/h)回收率可达98.4%,纯度达93.7%,总流程一次可处理该废水240mL。     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

磺化酞菁铜分子膜／SiO2／Si界面电荷转移机制的研究

在具有不同氧化层厚度的p型硅基片上修饰2层磺化酞菁铜分子膜.利用时间分辨表面光电压谱技术,对该膜系的界面电荷转移机制的光电开关特性进行了研究。结果表明,用时间分辨表面光电压谱技术研究界面电荷转移过程具有明显优越性.     

Alkylation of Benzene with Propene over Hβ Zeolite──The Effect of Reaction Conditions on the Distribution of Products

ＡｌｋｙｌａｔｉｏｎｏｆＢｅｎｚｅｎｅｗｉｔｈＰｒｏｐｅｎｅｏｖｅｒＨβＺｅｏｌｉｔｅ──ＴｈｅＥｆｆｅｃｔｏｆＲｅａｃｔｉｏｎＣｏｎｄｉｔｉｏｎｓｏｎｔｈｅＤｉｓｔｒｉｂｕｔｉｏｎｏｆＰｒｏｄｕｃｔｓＭＡＪｕｎ，ＳＨＥＮＪｉａｎ－ｐｉｎｇ，ＳＵＮＴ...     

二碘化钐促进的二硫代氨基甲酸酯和硫代氨基甲酸酯的还原断裂反应

室温下SmI2-THF-HMPA-t-BuOH体系可顺利地将二硫代氨基甲酸酯还原断裂得到二硫醚和硫代甲酰胺; 同样条件下, 硫代氨基甲酸酯还原断裂得到二硫醚篅34The reductive cleavage of dithiocarbamic esters are promoted by the SmI2-HMPA-THF-t-BuOH System successfully to give disulfides and thiocarboxamides at room temperature in good yields; The reduction of thiocarbamic esters are also promoted by the same system to give disulfides and carboxamides.     

Dawson型磷钨酸催化合成乳酸月桂醇酯

用Dawson型磷钨酸催化合成乳酸月桂醇酯。实验结果表明:Dawson型磷钨酸有较高的催化活性,反应时间短,酯收率高,工艺简单。最佳工艺条件为:醇/酸摩尔比为1.5:1,催化剂用量为0.3%,带水剂甲苯体积(mL)与反应物质量(g)之比为0.4:1~0.5:1,反应温度为115~140℃,反应时间30~50min。在此条件下,酯收率可超过93% 。