Paper conservation methods: a literature review

The main paper conservation methods are presented, classified in the following categories: preparation of the intervention, disinfestation and disinfection/sterilization, surface/dry cleaning, wet cleaning, chemical stabilization, paper repairs, consolidation and strengthening. Treatment documentation is also discussed. The targets, the historical aspects, the general principles, the materials and equipment, the acceptance and criticism pertaining to each method are briefly reviewed, and the most important research for their evaluation is presented. Several paper stabilization strategies, such as deacidification and iron gall ink stabilization, applicable to paper are elucidated. Specific consolidation and strengthening methods for paper, such as lamination and paper splitting are also discussed. The review mainly focuses on the established methods, but experimental, abandoned or insufficiently documented methods are also included. Shortcomings and limitations of several methods were found in the literature, concerning health issues, limited effectiveness, adverse side-effects on the treated artefacts and restricted applicability.     

Pre-Column Derivatization HPLC Procedure for the Quantitation of Aluminium Chlorohydrate in Antiperspirant Creams Using Quercetin as Chromogenic Reagent

This article describes the development and validation of a selective high-performance liquid chromatography method that allows, after liquid–liquid extraction and pre-column derivatization reaction with quercetin, the quantification of aluminium chlorohydrate in antiperspirant creams. Chromatographic separation was achieved on an XTerra MS C18 analytical column (150 × 3.0 mm i.d., particle size 5 μm) using a mobile phase of acetonitrile:water (15:85, v/v) containing 0.08 % trifluoroacetic acid at a flow rate of 0.30 mL min^?1. Ultraviolet spectrophotometric detection at 415 nm was used. The assay was linear over a concentration range of 3.7–30.6 μg mL^?1 for aluminium with a limit of quantitation of 3.74 μg mL^?1. Quality control samples (4.4, 17.1 and 30.6 μg mL^?1) in five replicates from five different runs of analysis demonstrated intra-assay precision (% coefficient of variation <3.8 %), inter-assay precision (% coefficient of variation <5.4 %) and an overall accuracy (% recovery) between 96 and 101 %. The method was used to quantify aluminium in antiperspirant creams containing 11.0, 13.0 and 16.0 % (w/w) aluminium chlorohydrate, respectively.     

Why is Rose Bengal More Phototoxic to Fibroblasts In Vitro Than In Vivo?

Photosensitized protein cross‐linking has been recently developed to seal wounds and strengthen tissue. Although the photosensitizing dye, Rose Bengal (RB), is phototoxic to cultured cells, cytotoxicity does not accompany RB‐photosensitized tissue repair in vivo. We investigated whether the environment surrounding cells in tissue or the high irradiances used for photo–cross‐linking inhibited RB phototoxicity. Fibroblasts (FB) grown within collagen gels to mimic a tissue environment and monolayer cultured FB were treated with RB (0.01–1 mm ) and the high 532 nm laser irradiances used in vivo for tissue repair (0.10–0.50 W cm^?2). Monolayer FB were substantially more sensitive to RB photosensitization: the LD₅₀ was >200‐fold lower than that in collagen gels. Collagen gel protection was associated with increased Akt phosphorylation, a prosurvival pathway. RB phototoxicity in collagen gels was 25‐fold greater at low (0.030 W cm^?2) that at high (0.50 W cm^?2) irradiances. Oxygen depletion at high irradiance only partially accounted for the irradiance dependence of phototoxicity as replacing air with nitrogen only increased the LD₅₀ by four‐fold in monolayers. These results indicate that the lack of RB phototoxicity during in vivo tissue repair results from upregulation of prosurvival pathways in tissue cells, oxygen depletion and irradiance‐dependent RB photochemistry.     

Extended hydrodynamic approach to quantum-classical nonequilibrium evolution. I. Theory

A mixed quantum-classical formulation is developed for a quantum subsystem in strong interaction with an N-particle environment, to be treated as classical in the framework of a hydrodynamic representation. Starting from the quantum Liouville equation for the N-particle distribution and the corresponding reduced single-particle distribution, exact quantum hydrodynamic equations are obtained for the momentum moments of the single-particle distribution coupled to a discretized quantum subsystem. The quantum-classical limit is subsequently taken and the resulting hierarchy of equations is further approximated by various closure schemes. These include, in particular, (i) a Grad-Hermite-type closure, (ii) a Gaussian closure at the level of a quantum-classical local Maxwellian distribution, and (iii) a dynamical density functional theory approximation by which the hydrodynamic pressure term is replaced by a free energy functional derivative. The latter limit yields a mixed quantum-classical formulation which has previously been introduced by I. Burghardt and B. Bagchi, Chem. Phys. 134, 343 (2006).     

Hybrid organo-inorganic clay with nonionic interlayers. mid- and near-IR spectroscopic studies

The intercalation of organic polymers molecules (i.e., PEGs and BRIJ) into a standard Ca-montmorillonite has been studied by XRD, TG, and IR spectroscopy. The polymer intercalation is confirmed by the increasing of the d(001) in XRD spectra as well as by the complex multisteps thermal decomposition behavior of the organo-clay materials. Mid-IR and diffuse reflectance near-IR spectra of the intercalated materials show the polymer diagnostic bands (CH stretching and deformation mode), shifted or changed in shape by the interaction with the clay matrix. Both PEG 1500 and PEG 4000 based materials are likely intercalated in an extended configuration, similar to the amorphous polymer form. BRIJ intercalated polymer spectra suggest the disordered conformation of the alkilic chain in a prevailing "gauche", poorly packed, conformation. Host montmorillonite IR bands, mainly OH and water stretching and deformation fundamentals, combination, and overtone bands, are reduced in intensity by polymer intercalation, pointing out an interaction, likely through H-bonding and/or a possible substitution of cations hydration water molecules.     

Reactivity of coordinatively unsaturated iron complexes towards carbon monoxide: to bind or not to bind?

An overview of the reactivity of coordinatively unsaturated iron complexes (in most cases Fe(II)) towards carbon monoxide is presented. Unsaturated iron complexes are known with coordination numbers (CN) of two to five adopting linear or slightly bent (CN = 2), trigonal (CN = 3), tetrahedral, square planar or trigonal pyramidal (CN = 4), and square-pyramidal or trigonal-bipyramidal geometries (CN = 5), respectively. The binding of CO depends strongly on the number and the nature of co-ligands (overall ligand field strength), the charge of the complex, the complex geometry, and the spin state of the unsaturated metal center. In many cases, CO addition to high-spin iron complexes takes place with concomitant spin state changes forming compounds in the lowest possible spin state, i.e., with S = 0. In several other cases, however, the addition of CO is reversible or is even totally rejected altogether for either thermodynamic or kinetic reasons. In the case of the latter such reactions are termed "spin-blocked" or "spin forbidden".     

Simultaneous determination of a selected group of cytostatic drugs in water using high-performance liquid chromatography-triple-quadrupole mass spectrometry

In recent years, an increasing concern has risen about the presence of pharmaceuticals in the aquatic environment. Despite their toxicity, increasing consumption and release into the municipal sewage, only a few studies have been focused on cytostatic drugs, mainly due to the lack of methods for their simultaneous analysis. In this work, a method, based on solid-phase extraction prior to high-performance liquid chromatography-triple quadrupole mass spectrometry determination, was optimized and validated for the simultaneous determination of some (14) of the most widely used cytostatic drugs in river water, influent and effluent wastewater. Process efficiency was in the range between 41 and 99% in real samples, except for cytarabine (24%), docetaxel (17%) and methotrexate (30%), due to suppression effects; precision values were <11%, except for gemcitabine (up to 19%); and detection limits were in the range between 0.1 and 38 ng/L. Cytarabine, doxorubicin, etoposide, gemcitabine, iphosphamide and vinorelbine were found at concentration levels up to 14 ng/L in influent and effluent wastewater, showing an insignificant decrease during sewage treatment; cytarabine and gemcitabine were found in effluent wastewater and were also detected in river water associated with effluent discharges.     

Transformations of polycyclic musks AHTN and HHCB upon disinfection with hypochlorite: two new chlorinated disinfection by-products (CDBP) of AHTN and a possible source for HHCB-lactone

In this work, the behavior of the polycyclic musks 6-acetyl-1,1,2,4,4,7-hexamethyltetraline (AHTN) and 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-γ-2-benzopyran (HHCB) was investigated upon disinfection by using sodium hypochlorite as disinfectant in a model disinfection basin in order to find new disinfection by-products (DBP). In the case of AHTN, the carboxylic acid 3,5,5,6,8,8-hexamethyl-5,6,7,8-tetrahydronaphthalene-2-carboxylic acid (AHTN-COOH) was generated by a haloform reaction, being the origin for two new chlorinated DBPs. In the case of HHCB, disinfection via hypochlorite led to the HHCB-lactone. All reaction products and intermediates were synthesized and isolated. The relevant degradation mechanisms are discussed in detail.     

Analysis of perfluorinated alkyl substances in Spanish sewage sludge by liquid chromatography-tandem mass spectrometry

The present article describes the development of an analytical method for the determination of 13 perfluorinated alkyl substances (PFAS), as well as its application to real sewage sludge samples to confirm the presence of these compounds. The isolation of the analytes was performed by agitation, sonication and centrifugation techniques, followed by EnviCarb cleanup and weak anion exchange solid-phase extraction. Sensitive and selective determination was carried out by high-performance liquid chromatography?Ctandem mass spectrometry (HPLC-MS/MS). Six mass-labelled internal standards were used to ensure the accuracy of the analytical results following isotopic dilution method. Several mobile phases (acetonitrile, methanol, mixtures of both and water with ammonium acetate or acetic acid) have been tested to reach the best resolution and reproducibility results. Other parameters related to MS/MS conditions were optimized. The reliability of the method was confirmed by the evaluation of linearity (R ²?=?0.995?C0.999), accuracy (84?C99%) and injection repeatability and reproducibility (relative standard deviation below 19 and 23%, respectively). Limits of detection ranged from 0.007 to 2.217?pg. Recoveries show values higher than 80% for most of the target compounds. The application of this method to twenty real samples demonstrates its efficiency and accuracy, as well as provides for the first time to our knowledge, PFAS levels in sewage sludges from Spain.