Characterisation of the comonomer composition and distribution of copolymers using chemometric techniques

Chemometric techniques have been applied to FTIR and DSC data to correlate polymer composition. Since structural differences in the polymers with only hydrocarbon structure, often cause subtle changes in spectra, the ability of chemometric techniques is required to discern these differences. FTIR spectra and thermal fractionation using DSC were measured for 28 types of polyethylenes (PE) varying in chain branching type, content and distribution. Unsupervised clustering methods such as principal component analysis (PCA) and supervised discriminant analysis were used to classify the PEs according to their structural class. The DSC data was the more successful in both classifying PEs according to their class. This revised version was published online in July 2006 with corrections to the Cover Date.     

Two-photon laser spectroscopy of the muonium 1S–2S transition

The 1² S _1/2(F=1)?2² S _1/2(F=1) energy interval in muonium has been investigated by Doppler-free two-photon laser spectroscopy. The transition was observed by uniquely identifying and counting the muons released after the photoionization of the 2S state by the same laser field. The measured transition frequency of 2455 528016(58)(43) MHz is in good agreement with QED calculations. The experiment can be interpreted as a test of the Lamb shift contributions at the 1% level. The method is also well suited for a precise determination of the mass of the positive muon in a muoniumhydrogen isotope shift measurement.     

The use of charge-coupled devices in the quantitative evaluation of images, on photographic film or membranes, obtained following electrophoretic separation of DNA fragments

Charge-coupled devices can provide an excellent means for the quantification of DNA band images on membranes and photographic film. However, proper consideration must be given to important parameters such as signal-to-noise ratio and resolution, especially in applications which demand the use of large format media. When employed in the direct imaging of chemiluminescent blots, the charge-coupled device can provide equal or better sensitivity than that obtained by indirect methods using film, with the additional advantages of wide dynamic range and freedom from the vagaries of film processing.     

Solid- and solution-phase synthesis of vancomycin and vancomycin analogues with activity against vancomycin-resistant bacteria

Vancomycin, the prototypical member of the glycopeptide family of antibiotics, is a clinically used antibiotic employed against a variety of drug-resistant bacterial strains including methicillin-resistant Staphylococcus aureus (MRSA). The recent emergence of vancomycin resistance, viewed as a growing threat to public health, prompted us to initiate a program aimed at restoring the potency of this important antibiotic through chemical manipulation of the vancomycin structure. Herein, we describe the development of synthetic technology based on the design of a novel selenium safety catch linker, application of this technology to a solid-phase semisynthesis of vancomycin, and the solid- and solution-phase synthesis of vancomycin libraries. Biological evaluation of these compound libraries led to the identification of a number of in vitro highly potent antibacterial agents effective against vancomycin-resistant bacteria. In addition to aiding these investigations, the solid-phase chemistry described herein is expected to enhance the power of combinatorial chemistry and facilitate chemical biology and medicinal chemistry studies.     

The photoreactions of recombinant phytochrome from the cyanobacterium Synechocystis: a low-temperature UV-Vis and FT-IR spectroscopic study

The interconvertible photoreactions of recombinant phytochrome from Synechocystis reconstituted with phycocyanobilin were investigated by light-induced optical and Fourier-transform infrared (FT-IR) difference spectroscopy at low temperatures for the first time. The photochemistry was found to be deferred below -100 degrees C for the transformation of red-absorbing form of phytochrome (Pr)-->far-red-absorbing form of phytochrome (Pfr), and no formation of an intermediate similar to the photoproduct of phytochrome A obtained at -140 degrees C (lumi-R) was observed. Two intermediates could be stabilized below -40 degrees C and between -40 and -20 degrees C, and were denoted as meta-Ra and meta-Rc, respectively. Above -20 degrees C Pfr was obtained. In the reverse reaction two intermediates could be stabilized below -60 degrees C (lumi-F) and between -60 and -40 degrees C (meta-F). The FT-IR difference spectra of the late Pr-->Pfr photoreaction show great similarities to the spectra obtained from oat phytochrome A suggesting similar conformation of the chromophore and interactions with its protein environment, whereas deviations in the spectra of meta-Ra were observed. A large band around 1700 cm-1 in the difference spectra between the intermediates and Pr which is tentatively assigned to the C19=O group of the prosthetic group indicates the Z,E isomerization around the C15=C16-methine bridge of the chromophore during the formation of meta-Ra. In the difference spectra of the parent states only small differences are observed in this region suggesting that the frequency of the carbonyl group is similar in Pr and Pfr. Since the FT-IR difference spectra between lumi-F and Pfr show great similarities to the spectra of the parent states, it is assumed that during the formation of lumi-F the chromophore largely returns into the primary Pr conformation. The FT-IR spectra recorded in a medium of 2H2O generally show a downshift of the significant bands due to the isotope effect. The appearance of a characteristic band around 935 cm-1 in all 2H2O spectra suggests an assignment to an N-2H bending vibration of the chromophore.     

Spherical coordinate representations of solvent composition for liquid chromatography method development using experimental design

One of the major techniques used for the method development of ternary and quaternary high performance liquid chromatography (HPLC) systems has been to use mixture designs, often referred to as "Glajch's Triangle". This technique does not allow for the systematic and simultaneous optimization of other factors such as gradient time, pH and temperature that affect the quality of separations. An alternative approach is to use experimental designs. The condition, however, that the composition of all components of the mobile phase must total 100% presents a problem when trying to mathematically represent ranges of each mobile phase constituent of a ternary or quaternary system. A method is described here, based on spherical coordinate representations, that adheres to the constraints of the mobile phase composition and allows experimental designs, such as central composite and factorial designs, to be applied to the simultaneous optimization of the mobile phase composition. Other factors, in particular temperature and gradient time, can then be included in the design. As a result of applying these designs to the HPLC separation of phenols and corticosteroids, it was found necessary to include three-way interactions between experimental factors in the model. The significance of these interactions shows that they need to be considered in HPLC method development.     

Isolation and structure of [HC[CH(SiMe(3))(SnMe(3))](2)](+): a remarkably stable sec-alkyl cation

The reaction of the tin-substituted propene Me3Sn(R)CHCH=CHR (R = SiMe3) with MCl4 in dichloromethane in the presence of Me3SnCl gives the first examples of isolable sec-alkyl carbocation salts, [HC{CH(R)SnMe3}2]+M2Cl9- (M = Zr, Hf). The compounds are thermally stable and, unlike previously isolated trialkyl carbocations, do not require superacidic media or weakly coordinating anions for stability. The crystal structure and DFT calculations suggest polarization of the Sn substituents and hyperconjugation as the reason for the unexpected stability. The stabilizing effect of tin is significantly stronger than that of Si. The carbocations are effective initiators for the polymerization of isobutene, isoprene, and alpha-methylstyrene.