Vulcanization kinetics of graphene/styrene butadiene rubber nanocomposites

This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.     

Bioconversion of Corncob Acid Hydrolysate into Microbial Oil by the Oleaginous Yeast Lipomyces starkeyi

For the first time, corncob acid hydrolysate was used for microbial oil production by the oleaginous yeast Lipomyces starkeyi. After hydrolysis by dilute sulfuric acid, corncob could turn into an acid hydrolysate with a sugar concentration of about 42.3 g/L. Detoxified by overliming and absorption with activated carbon, the corncob hydrolysate could be used by L. starkeyi efficiently that a total biomass of 17.2 g/L with a lipid content of 47.0 % (corresponding to a lipid yield of 8.1 g/L) and a lipid coefficient of 20.9 could be obtained after cultivation on the corncob hydrolysate for 8 days. Therefore, L. starkeyi is a promising strain for microbial oil production from lignocellulosic biomass. Glucose and xylose were used by L. starkeyi simultaneously during lipid fermentation while arabinose could not be utilized by it. Besides, the lipid composition of L. starkeyi was similar to that of vegetable oils; thus, it is a promising feedstock for biodiesel production.     

Pretreatment Methods for Bioethanol Production

Lignocellulosic biomass, such as wood, grass, agricultural, and forest residues, are potential resources for the production of bioethanol. The current biochemical process of converting biomass to bioethanol typically consists of three main steps: pretreatment, enzymatic hydrolysis, and fermentation. For this process, pretreatment is probably the most crucial step since it has a large impact on the efficiency of the overall bioconversion. The aim of pretreatment is to disrupt recalcitrant structures of cellulosic biomass to make cellulose more accessible to the enzymes that convert carbohydrate polymers into fermentable sugars. This paper reviews several leading acidic, neutral, and alkaline pretreatments technologies. Different pretreatment methods, including dilute acid pretreatment (DAP), steam explosion pretreatment (SEP), organosolv, liquid hot water (LHW), ammonia fiber expansion (AFEX), soaking in aqueous ammonia (SAA), sodium hydroxide/lime pretreatments, and ozonolysis are intensively introduced and discussed. In this minireview, the key points are focused on the structural changes primarily in cellulose, hemicellulose, and lignin during the above leading pretreatment technologies.     

A New α-Galactosidase from Thermoacidophilic Alicyclobacillus sp. A4 with Wide Acceptor Specificity for Transglycosylation

An α-galactosidase gene (gal36A4) of glycosyl hydrolase family 36 was identified in the genome of Alicyclobacillus sp. A4. It contains an ORF of 2,187 bp and encodes a polypeptide of 728 amino acids with a calculated molecular mass of 82.6 kDa. Deduced Gal36A4 shows the typical GH36 organization of three domains—the N-terminal β-sheets, the catalytic (β/α)₈-barrels, and the C-terminal antiparallel β-sheet. The gene product was produced in Escherichia coli and showed both hydrolysis and transglycosylation activities. The optimal pH for hydrolysis activity was 6.0, and a stable pH range of 5.0–11.0 was found. The enzyme had a temperature optimum of 60 °C. It is specific for α-1,6-glycosidic linkages and had a K _m value of 1.45 mM toward pNPGal. When using melibiose as both donor and acceptor of galactose, Gal36A4 showed the transfer ratio of 23.25 % at 96 h. With respect to acceptor specificity, all tested monosaccharides, disaccharides, and oligosaccharides except for D-xylose and L-arabinose were good acceptors for transglycosylation. Thus, Gal36A4 may find diverse applications in industrial fields, especially in the food industry.     

Enhanced mechanical and thermal properties of poly(l-lactide) nanocomposites assisted by polydopamine-coated multiwalled carbon nanotubes

Herein, a facile and noncovalent modification for multiwalled carbon nanotubes (MWNTs) is adopted by the self-polymerization of dopamine (DOPA). And, the polydopamine-coated MWNTs (D-MWNTs) were further incorporated into poly(l-lactide) (PLLA) matrix through the solvent-casting method. It is found that the D-MWNTs tend to be well dispersed in PLLA matrix than the pristine MWNTs and the D-MWNTs that can act as heterogeneous nucleators that evidently affect the morphology and crystallization behavior of PLLA. In addition, the significant improvement of dispersion and the interface interaction of PLLA/D-MWNTs, via dopamine coating between the MWNTs and PLLA matrix, results in enhanced mechanical and thermal properties and electrical conductivity. This facile methodology is believed to afford broad application potential in carbon nanotubes (CNTs)-based polymer nanocomposites.     

Apoptosis in BEL-7402 cells induced by ruthenium(II) complexes through a ROS-mediated mitochondrial pathway

Three Ru(II) polypyridyl complexes [Ru(dmb)₂(HMSPIP)](ClO₄)₂ (1), [Ru(phen)₂(HMSPIP)](ClO₄)₂ (2) and [Ru(dmp)₂(HMSPIP)](ClO₄)₂ (3) were synthesized and characterized. The cytotoxicity in vitro, apoptosis, cell cycle arrest, reactive oxygen species and mitochondrial membrane potential were assayed. The IC₅₀ values of complexes 1, 2 and 3 toward BEL-7402, A549, MG-63 and SK-BR-3 cell lines ranged from 10.9 ± 1.6 to 42.0 ± 3.4 μM. Complexes 1, 2 and 3 can effectively induce apoptosis and inhibit the growth of BEL-7402 cells at the G2/M phase. These complexes can enhance the level of reactive oxygen species and induce decrease in the mitochondrial membrane potential. Additionally, complex 2 can down-regulate the expression of antiapoptotic protein of Bcl-2 protein and up-regulate the levels of proapoptotic protein Bim in BEL-7402 cells.     

Synthesis and structure of novel 6-(pyrazol-1-yl)-4-methyl-1H-pyrazolo[3,4-b]pyridin-3-ol derivatives

New 6-(pyrazol-1-yl)pyrazolo[3,4-b]pyridin-3-ol compounds were synthesized by cyclization reaction from 2,6-dichloro-4-methylnicotinonitrile. Their derivatives exist as the 3-hydroxy tautomer. The structure of the compound 1a of one of the resulting compounds was studied in detail by X-ray diffraction.     

锰催化的C?C键生成反应研究进展

迄今为止,贵金属(铑、钯、钌等)在过渡金属催化的碳碳键生成反应中发挥着主导作用,然而使用廉价金属催化剂更符合可持续发展的要求。锰是地壳中含量排第三位的过渡金属,价格便宜,环境危害性小,有潜力成为贵金属催化剂的替代品并发挥其自身独特的反应性。尽管锰参与的当量反应有大量文献报道,目前锰催化的反应尤其是碳碳键生成反应的发展还不成熟,如何实现高效的催化循环是锰催化领域面临的主要难题之一。本文对锰催化的付-克烷基化反应、格氏试剂的酰化反应、偶联反应、碳金属化反应、自由基反应和碳氢键活化反应进行了综述。     

石墨烯纳米孔的制备及λ-DNA穿孔初步研究

纳米孔测序是有可能实现"$1,000 Genome"目标的技术之一.近年来,研究较多的纳米孔有蛋白质纳米孔和硅基材料的固态纳米孔.蛋白孔寿命比较短,而基于硅基底的固态纳米孔深度显著超过单链DNA相邻碱基的间距,所以,无法实现DNA的单个碱基的分辨.作者用聚焦离子束先制造氮化硅基底,并在该基底上铺设石墨烯,再用聚焦电子束刻蚀石墨烯,获得直径10 nm以下的纳米孔,初步分析了DNA穿越纳米孔时产生的电信号及穿孔噪音,向单层石墨烯纳米孔测序DNA迈出了一步.     

Au/TiO2 nanotube catalysts prepared by combining sol–gel method with hydrothermal treatment and their catalytic properties for CO oxidation

A new preparation method for Au/TiO₂ nanotubes (NTs) by combing sol–gel with hydrothermal treatment technique was developed. The TiO₂ NTs calcined at 300 °C were nearly uniform, and the gold particles were distributed homogeneously. The possible formation mechanism was suggested. The 5 % Au/TiO₂ NTs calcined at 300 °C had the best catalytic activity for CO oxidation, and their conversion of CO remained at 100 % during 60 h on stream. This preparation method could improve the thermal stability of Au/TiO₂ nanotube catalysts.