A Rapid and Sensitive LC–MS Method for Determination of Ezetimibe Concentration in Human Plasma: Application to a Bioequivalence Study

A selective and highly sensitive high performance liquid chromatography-electrospray ionization mass spectrometry method has been developed for determination of ezetimibe concentrations in human plasma. Ezetimibe was extracted from plasma with ethyl acetate followed by evaporation of the organic layer and, then, reconstitution of the residue in mobile phase before injection to chromatograph. The mobile phase consisted of acetonitrile-ammonium acetate (10 mM, pH 3.0), 75:25 (v/v). An aliquot of 10 μL was chromatographically analyzed on a prepacked Zorbax XDB-ODS C₁₈ column (2.1 × 100 mm, 3.5 micron). Detection of analytes was achieved by mass spectrometry with atmospheric pressure chemical ionization (APCI) interface in the negative ion mode operated under the multiple-reaction monitoring mode (m/z transition: ezetimibe 408–271). Standard curves were linear (r = 0.998) over the wide ezetimibe concentration range of 0.05–30.0 ng mL⁻¹ with acceptable accuracy and precision. The limit of detection was 0.02 ng mL⁻¹. The validated LC–APCI–MS method has been used successfully throughout a bioequivalence study on an ezetimibe generic product in 24 healthy male volunteers.

     

A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

CuO‐CeO2 Nanocomposite: A Highly Efficient Recyclable Catalyst for the Green Synthesis of 1,8‐Dioxooctahydroxanthenes in Water

CuO‐CeO₂ nanocomposite is reported as a highly efficient and recyclable catalyst for the green synthesis of 1,8‐dioxooctahydroxanthenes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any losing of its efficiency.     

Gas storage of simple molecules in boron oxide nanocapsules

The capability of the B₂₀O₃₀ nanocapsule to store H₂, N₂, CO, CO₂, NH₃, CH₄, and Cl₂ molecules on the outer surface and inside of the cage was investigated using Monte Carlo simulations, long‐range and dispersion corrected density functional theory, and Møller–Plesset second‐order perturbation theory. Also, Monte Carlo simulations were employed to investigate the adsorption behavior of larger number of guest molecules inserted into and onto the larger B₈₀O₁₂₀ and B₂₀O₃₀@B₈₀O₁₂₀ cages. Absolute localized molecular orbitals energy decomposition analysis was used to describe the nature of intermolecular interactions in these endohedral and exohedral complexes. It is found that the hydrogen and ammonia gases are diffused to the inside of spherical B₂₀O₃₀ capsule, while other guest molecules prefer to interact with the outer surface of spherical and pyramidal capsules. For B₈₀O₁₂₀, up to 26 H₂ and 11–14 N₂, CO, CO₂, NH₃, and CH₄ molecules are stored inside the capsule. The residual molecules are adsorbed on the outer surface of nanocapsule. © 2013 Wiley Periodicals, Inc.     

Bulk polymer nanoparticles containing a tetrakis(3-hydroxyphenyl)porphyrin for fast and highly selective separation of mercury ions

We report on the synthesis of polymeric nanoparticles (PNPs) containing a tetrakis(3-hydroxyphenyl)porphyrin, and their use for the separation of mercury(II) ion. The PNPs were prepared by bulk polymerization from methacrylic acid (the monomer), ethyleneglycol dimethacrylate (the cross-linker), 2,2′-azobisisobutyronitrile (the radical initiator) and the mercury(II) complex of 5,10,15,20-tetrakis(3-hydroxyphenyl)-porphyrin. The Hg(II) ion was then removed by treatment with dilute hydrochloric acid. The PNPs were characterized by colorimetry, FT-IR spectroscopy, and scanning electron microscopy. The material is capable of binding Hg(II) from analyte samples. Bound Hg(II) ions can be eluted with dilute nitric acid and then quantified by cold vapor AAS. The extraction efficiency, the effects of pH, preconcentration and leaching times, sample volume, and of the nature, concentration and volume of eluent were investigated. The maximum adsorption capacity of the PNPs is 249 mg g^?1, the relative standard deviation of the AAS assay is 2.2 %, and the limit of detection (3σ) is 8 ng.L^?1. The nanoparticles exhibit excellent selectivity for Hg(II) ion over other metal ions and were successfully applied to the selective extraction and determination of Hg(II) ion in spiked water samples.

NH2SO3H and H6P2W18O62 · 18H2O-Catalyzed,Three-Component,One-Pot Synthesis of Benzo[c]acridine Derivatives

We report here two simple methods for the synthesis of benzo[c]acridine derivatives from three-component, one-pot condensation of 1-naphthylamine, dimedone, and a variety of substituted aldehydes in the presence of a catalytic amount of NH₂SO₃H or H₆P₂W₁₈O₆₂ · 18H₂O under solvent-free conditions at 120 °C or in refluxing ethanol.     

Efficient Synthesis of Bis-Coumarins Using Silica-Supported Preyssler Nanoparticles

Reaction of aldehydes and 4-hydroxycoumarin in the presence of catalytic amount of silica-supported Preyssler nanoparticles led to synthesis of bis-coumarins in excellent yields.