Synthesis,characterization and theoretical evaluations of HMDS promoted chemoselective O-alkylation of uracils

The sodium salts of the conjugated bases of uracils undergo highly chemoselective O⁴-monoalkylation when treated with various alkyl halides in dry DMF, while the use of methyl iodide results in N¹+N³-dimethylation. Theoretical evaluations of the chemo- and regioselectivity along with X-ray crystallographic data are presented.     

Evaluation of the cyclotron production of 165Er by different reactions

Erbium-165 with 10.3 h physical half-life decays completely by electron capture to the ground state of stable isotope ¹⁶⁵Ho and it is an ideal radio lanthanide for Auger electron therapy. Excitation function of ¹⁶⁵Er via ^natEr(p,x)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁶Er(p,2n)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁵Ho(p,n)¹⁶⁵Er and ¹⁶⁵Ho(d,2n)¹⁶⁵Er reactions were calculated using ALICE/ASH (Hybrid and GDH models) and EMPIRE 3.1 codes and then were compared with the reported measurement by experimental data and TENDL-2011. Physical yield and target thickness were evaluated with attention to excitation function, stopping power and SRIM code. ¹⁶⁵Er was produced using the sedimentation technique through the ^natEr (p,x)¹⁶⁵Tm → ¹⁶⁵Er reaction. The deposited target was irradiated with 15 MeV proton beams at 20 μA current for 1 h. The ¹⁶⁵Tm production yield was 26 MBq/μA h at the end of bombardment.     

Use of clinoptilolite loaded with 1-(2-pyridylazo)-2-naphthol as a sorbent for preconcentration of Pb(II), Ni(II), Cd(II) and Cu(II) prior to their determination by flame atomic absorption spectroscopy

A solid phase extraction system for separation and preconcentration of trace amounts of Pb(II), Ni(II), Cd(II) and Cu(II) is proposed. The procedure is based on the adsorption of Pb²⁺, Ni²⁺, Cd²⁺ and Cu²⁺ ions on a column of 1-(2-pyridylazo)-2-naphthol (PAN) immobilised on surfactant-coated clinoptilolite prior to their determinations by Flame Atomic Absorption Spectroscopy (FAAS). The effective parameters including pH, sample volume, sample flow rate and eluent flow rate were also studied. The analytes collected on the column were eluted with 5 mL of 1 mol L^?1 nitric acid. A concentration factor of 180 can be achieved by passing 900 mL of sample through the column. The detection limits (3 s) for Cd, Cu, Pb and Ni were found to be 0.28, 0.12, 0.44 and 0.46 µg L^?1, respectively. The relative SDs at 10 µg L^?1 (n = 10) for analytes were in the range of 1.2–1.4%. The method was applied to the determination of Pb, Ni, Cd and Cu in water samples.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

d-Glucosamine as an efficient and green additive for palladium-catalyzed Heck reaction

The Heck coupling of haloarenes with various alkenes was successfully performed in the presence of 0.5 mole % Pd(OAc)₂ and 1.0 mole % d-glucosamine as an additive with K₂CO₃ as the optimal base in a mixture of H₂O/iPrOH (φ _r = 2: 1) as the reaction solvent at 80°C after 6 h. d-Glucosamine was found to be an inexpensive, air-stable, easy to available, and efficient additive in palladium-catalyzed Heck reactions of aryl iodides (67–95 % conversion) and bromides (38–72 % conversion).     

Complexation ability of kryptofix 22DD with lanthanum (III) cation in some binary mixed non-aqueous solvents

The complex formation between lanthanum (III) cation with kryptofix 22DD was studied in acetonitrile–dimethylformamide (AN–DMF), acetonitrile–methanol (AN–MeOH), acetonitrile–ethylacetate (AN–EtOAc) and acetonitrile–ethanol (AN–EtOH) binary solvent solutions at different temperatures by using conductometric method. The conductance data show that in all cases, the stoichiometry of the complex formed between the macrocyclic ligand and the metal cation is 1:1 [ML]. The stability order of (kryptofix 22DD.La)³⁺ complex in the studied binary solvent solutions at 25 °C was found to be: AN–EtOAc>AN–EtOH>AN–MeOH>AN–DMF and in the case of pure non-aqueous solvents at 25 °C was: EtOAc>EtOH>MeOH>AN>DMF. A non-linear behavior was observed for changes of logK_f of (kryptofix 22DD.La)³⁺ complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions and also the preferential solvation of the species involved in the complexation reaction. The values of standard thermodynamic parameters (?H _c°, ?S _c°) for formation of (kryptofix 22DD.La)³⁺ complex were obtained from temperature dependence of the stability constant using the van’t Hoff plots.The results show that in most cases, the (kryptofix 22DD.La)³⁺ complex is enthalpy destabilized, but entropy stabilized and the values of these thermodynamic quantities for formation of the complex are quite sensitive to the nature and composition of the mixed solvents solution.     

“Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization

Aerogel/polystyrene nanocomposites with mixed free and aerogel-attached polystyrene chains were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. 3-methacryloxypropyldimethylchlorosilane containing a double bond, which could be incorporated into polystyrene chains by a “grafting through” approach, was used as an aerogel modifier. Kinetics of RAFT polymerization of styrene in the presence of modified silica aerogel was studied by monitoring conversion and molar mass values. To further study, attached polymers were detached and their molecular characteristics were compared to free chains. According to results, the presence of silica aerogel particles has a sensible influence on polymerization kinetic and more aerogels result in decreased polymerization rate and conversion. The dispersity (Ð) of polymer chains increased by the addition of silica aerogel. In the case of aerogel-attached polystyrene chains, number-averaged molar mass values were slightly lower than that of free chains. Also, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to observe the effect of loading on thermal properties of synthesized nanocomposites.     

Structure and properties of NR/BR blend/clay nanocomposites prepared by the latex method

Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount.     

An efficient and convenient synthesis of pentasubstituted pyrroles from alkyl acetoacetates,dialkyl acetylenedicarboxylates,and amines

A simple and efficient synthesis of pentasubstituted pyrroles has been developed using a one-pot, two-step reaction. The synthesis of a series of 4-hydroxypenta-1,3-diene-tricarboxylates from alkyl acetoacetates and dialkyl acetylenedicarboxylates in the presence of K₂CO₃, followed by cyclization with amines, gave the corresponding pyrroles in excellent yields.     

Radio-immunoconjugated,Dox-loaded,surface-modified superparamagnetic iron oxide nanoparticles (SPIONs) as a bioprobe for breast cancer tumor theranostics

In this research, we develop dual modality molecular imaging and also radio-immunotherapy (RIT) bioprobes, in the form of modified superparamagnetic iron oxide nanoparticles (SPIONs) conjugated to radiolabeled antibodies, for PET and MRI of HER2 expressing cancers as well as a PH sensitive drug carrier by embedded an anticancer agent for cancer therapeutic applications. The bioprobes were developed by conjugating ⁶⁴Cu labeled trastuzumab (herceptin) and rituximab (Anti CD-20) antibodies to modified SPIONs. The SPIONs were modified with carboxymethyl chitosan and functionalized with acrylic acid (AA). Also, with the purpose of identifying more effective bifunctional chelator (BFC), we compared the properties of novel BFC, p-NO₂-Bn-PCTA with the commonly used DOTA-NHS for radio-immunoconjugate preparations. Moreover, a chemotherapy drug, doxorubicin, was then loaded onto engineered nanoparticles for targeted intracellular drug delivery and selective cancer cell killing. Resulting radio-immunoconjugated-SPIONs were evaluated for molecular imaging and effective targeting of the HER2+ receptors in SKBR3 cell lines and breast tumor bearing Balb/C mice. Therefore, our biocompatible SPIONs could serve as a promising multifunctional theranostics nanoplatform in dual modality imaging guided RIT of HER2 overexpressing cancer applicable to drug delivery and controlled drug release for trigger both intrinsic and extrinsic pathways of apoptosis.