Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

Synthesis of pyridinium ylide complexes of methylcobaloxime and crystal structure determination of [benzoyl(1-pyridinio)methanide]bis(dimethylglyoximato)methylcobalt benzene solvate

Summary Pyridinium ylide complexes of methylcobaloxime were synthesized by the treatment of an ylide with Co(Hdmg)₂ Me(SMe₂). The crystal structure of one of the complexes, [Co(Hdmg)₂Me C₅H₅NCHCOPh]C₆H₆ has been determined by x-ray diffraction techniques. The crystals are monoclinic, space group P2₁/c, witha = 10.456(5),b = 11.079(4),c = 24.58(1) Å, = 99.58(6), V = 2808 ų, Z = 4. The Co-C (ylide) bond distance is 2.18 Å and Co-C(methyl) 2.04 Å. C(ylide)-Co-C(methyl) bond angle is 174.9°. The crystal, i.r. and¹H n.m.r. data suggest that thetrans-influence of the ylide ligands is larger than that of py, Melm, OH₂ or PPh₃.     

Matrix IR spectra and normal coordinate analysis for methanesulfenyl chloride and isotopic analogs

The IR spectra (4000-250 cm⁻¹) of CH₃SCl and CD₃SCl in solid argon have been obtained. Fundamental vibrations, except the torsional vibrations, have been assigned. Normal coordinate analysis has been carried out omitting the torsional modes.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Overproduction of riboflavin by anArthrobacter sp. mutant resistant to 5-fluorouracil

Effects of pH and dissolved oxygen concentration on batchwise riboflavin production by a 5-fluorouracil (5-FU)-resistant mutant ofArthrobacter sp. were investigated. The reaction was carried out in a jar fermentor. The optimal pH of culture medium was around 7.3. Dissolved oxygen concentration was almost constant during fermentation at 600 rpm of agitation rate. Production of riboflavin reached a maximum of 160 mg/L after 70 h fermentation under the agitation rate of 600 rpm, aeration rate of 1.0 L/min, and pH 7.0.     

The origin of unidirectional charge separation in photosynthetic reaction centers: nonadiabatic quantum dynamics of exciton and charge in pigment–protein complexes

Exciton charge separation in photosynthetic reaction centers from purple bacteria (PbRC) and photosystem II (PSII) occurs exclusively along one of the two pseudo-symmetric branches (active branch) of pigment–protein complexes. The microscopic origin of unidirectional charge separation in photosynthesis remains controversial. Here we elucidate the essential factors leading to unidirectional charge separation in PbRC and PSII, using nonadiabatic quantum dynamics calculations in conjunction with time-dependent density functional theory (TDDFT) with the quantum mechanics/molecular mechanics/polarizable continuum model (QM/MM/PCM) method. This approach accounts for energetics, electronic coupling, and vibronic coupling of the pigment excited states under electrostatic interactions and polarization of whole protein environments. The calculated time constants of charge separation along the active branches of PbRC and PSII are similar to those observed in time-resolved spectroscopic experiments. In PbRC, Tyr-M210 near the accessary bacteriochlorophyll reduces the energy of the intermediate state and drastically accelerates charge separation overcoming the electron–hole interaction. Remarkably, even though both the active and inactive branches in PSII can accept excitons from light-harvesting complexes, charge separation in the inactive branch is prevented by a weak electronic coupling due to symmetry-breaking of the chlorophyll configurations. The exciton in the inactive branch in PSII can be transferred to the active branch via direct and indirect pathways. Subsequently, the ultrafast electron transfer to pheophytin in the active branch prevents exciton back transfer to the inactive branch, thereby achieving unidirectional charge separation.

Essential factors leading to unidirectional charge separation in photosynthetic reaction centers are clarified via nonadiabatic quantum dynamics calculations.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Diastereomeric Difference of the Self-Inclusion Complex of N(N′-Formyl-Phenylalanyl)-Deoxyamino-β-Cyclodextrin Caused by the Interaction between the Arm and the Rim of the Cavity

A complete assignment of proton resonances for N(N-formyl d-phenylalanyl)-deoxyamino--cyclodextrin (1d) was performed by means of 1D and 2D NMR,¹H–^1H-COSY, ¹H–^13C-COSY, TOCSYand NOESY spectroscopy. Based on 2D-NMR ROESY and circular dichroism spectroscopy, the conformation of 1d was determined; the phenyl group stays inside the distorted cyclodextrin (CyD) cavity forming a self-inclusion complex, which is almost the same as N(N-formyl l-phenylalanyl)-deoxyamino--CyD (1l). The remarkable diastereomeric difference was observed in the chemical shifts of H(5) and H(6) protons at the narrow rim of the CyD cavity and induced circular dichroism spectra. These results suggest the existence of hydrogen bonds between the hydroxyl group on CyD and the amide groups on the arms, which provides the difference in the molecular recognition properties.     

Catalytic,asymmetric Mannich-type reactions of alpha-imino esters bearing readily removable substituents on nitrogen

[reaction: see text] Catalytic, enantioselective Mannich-type reactions of alpha-imino esters bearing readily removable substituents on nitrogen are described. Several N-carbamate-protected alpha-imino esters, which are readily prepared from 2-bromoglycine esters using a polymer-supported amine, reacted with silicon enolates to afford the desired adducts in high yields with high enantioselectivity using a copper(II)-diamine complex. Easy deprotection of the product amine and transformation to free alpha-amino acid derivatives have also been demonstrated.