Synthesis of polymers by use of divalent metal salts of monohydroxyethyl phthalate: Metal-containing isocyanurate-type crosslinked polyurethanes

Divalent metal salts (I) of monohydroxyethyl phthalate have catalytic activity for polymerization of isocyanate groups. The synthesis of novel metal-containing isocyanurate-type crosslinked polyurethanes were investigated by the crosslinking reaction of I in DMF with diisocyanates or urethane prepolymers, that is, diisocyanate adducts of polyethylene glycol. 2,4-Toluene diisocyanate and diphenylmethane diisocyanate were used as diisocyanates, and DMF was the solvent. The crosslinking reactions were followed by determining the gelation time. Gelation time decreased with increasing temperature. The Ca salt was more effective than the Mg salt in the crosslinking reaction. The yields of resulting metal-containing three-dimensional polymers decreased with increasing metal content in the feed. The Ca salt was more easily introduced into the network polymers than the Mg salt was. Decomposition temperatures decreased on introducing metals into the network polymers. Some physical properties of the metal-containing network polymers are also discussed.     

SmI2-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates with application to the synthesis of functionalized (Z)-fluoroalkene-type dipeptide isosteres

A samarium diiodide (SmI(2))-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates (15, 29, and 34) was successfully applied to the synthesis of (Z)-fluoroalkene dipeptide isosteres (23, 30, and 35), which have served as potential dipeptide mimetics. Reduction of the gamma,gamma-difluoro-alpha,beta-enoates by SmI(2) proceeded via successive two-electron transfers to form dienolate species which upon kinetically controlled trapping with t-BuOH yielded Xaa-Gly-type fluoroalkene isosteres exemplified by 23, 30, and 35. Replacement of the t-BuOH kinetic trapping agent with aldehydes or ketones provided access to alpha-substituted fluoroalkene isosteres (43 and 45) through aldol reactions of Sm-dienolates with the carbonyl compounds. Of particular note, the use of the SmI(2)-HCHO reagent system with chiral enoate 34 provided D-Phe-psi[(Z)-CF[double bond]CH]-D/L-Ser isosteres (45), which could be converted to enantiomerically pure isosteres (49-52) that bore a variety of side chain functionalities at the alpha-position. This was achieved by a sequence of manipulations consisting of beta-lactone formation followed by chromatographic separation and ring-opening with soft nucleophiles. Included in the present work is the first utilization of a Rh-catalyzed Reformatsky reaction of chiral imines for the stereoselective preparation of alpha,alpha-difluoro-beta-amino acid derivatives (28 and 33). The appropriate choice of reagents (carbonyl compounds for kinetic trapping or ring-opening nucleophiles and imines for Reformatsky reactions) allows the presented methodology to yield various fluoroalkene isosteres possessing a wide range of side chain functionalities.     

A novel method for atomic absorption spectroscopy based on the analyte-Zeeman effect

A new type of atomic absorption spectrometry using the Zeeman effect of sample materials is proposed. A magnetic field was applied to the sample vapor in the direction perpendicular to the propagation of light emitted from an atomic spectral source. Absorption of radiation polarized perpendicular and parallel to the magnetic field was observed alternatively. The absorption difference was proportional to the true atomic absorption, and was not interfered with by any other molecular absorption and light scattering, i.e., background absorption. The background absorption could be monitored at exactly the same wavelength as an atomic absorption line. Suitable magnetic field strength was found for each line of the various elements.     

The first example of the stereoselective synthesis of 7 beta-carbamoyl-4,5alpha-epoxymorphinan via a novel and reactive gamma-lactone

7beta-Carbamoyl-4,5alpha-epoxymorphinans 5 were stereoselectively synthesized from the 7alpha-carboxylate intermediate 3 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and amines under reflux conditions in mesitylene via a novel and reactive gamma-lactone 7. These were the first examples of the stereoselective syntheses of 7beta-substituted 4,5alpha-epoxymorphinans. The mechanism of the reaction process was elucidated as follows: 1) epimerization of 7alpha-carboxylate 3, 2) intramolecular lactonization of 7beta-carboxylate 6, and 3) aminolysis of the resultant gamma-lactone 7. The aminolysis of the isolated reactive gamma-lactone 7 with allylamine and the alcoholysis with MeOH in the presence of NaBH(4) proceeded at room temperature. The gamma-lactone 7 can be a useful intermediate for the preparation of 7beta-substituted 4,5alpha-epoxymorphinans that would be potent selective delta opioid receptor ligands. The stereoselective syntheses of the 7alpha-carbamoyl-4,5alpha-epoxymorphinans 9 from 7alpha-carboxylate 3 via 7alpha-carboxylic acid were also successful.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

Synthesis of calix[4]arene library substituted with peptides at the upper rim

A fluorescence-labeled calix[4]arene library substituted with peptides at the upper rim was synthesized. Screening of the library for binding a dye-labeled oligopeptide indicated that some peptidocalix[4]arenes selectively bind the oligopeptide. The chemosensitivity of the library members for a target peptide was also investigated.     

Synthesis of 4,6-disubstituted 2-methylpyridines and their 3-carboxamides

A new one-pot synthesis of title compounds by the reactions of α,β-unsaturated carbonyl compounds with β-aminocrotononitrile in the presence of sodium hydroxide is described.     

Structural studies of the carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: suggestion for the initial activation site for dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.     

Remarkably Selective Ag(+) Extraction and Transport by Thiolariat Ethers

Synthesis and metal binding properties of thiolariat ethers, where a sulfide side chain is introduced into a framework of a crown ether, have been performed. Remarkably high Ag(+) selectivity among heavy metal ions was observed in solvent extraction and transport across a liquid membrane using thiolariat ethers with a 15-crown-5 ring as carriers. Thiolariat ethers with a 12-crown-4 or a 18-crown-6 do not exhibit such a high Ag(+) selectivity. The former binds metal ions weakly, and the latter recognizes Pb(2+) as well as Ag(+). The corresponding oxygen analogs, i.e. lariat ethers, do not show Ag(+) selectivity. The Ag(+) binding strength of the sulfoxide and sulfone analogs is much lower than that of thiolariat ethers. Thiolariat ethers with a benzocrown framework containing a sulfide chain at the 4 position of the benzene nucleus showed very low affinity to Ag(+). Extractability and transport ability using various thiolariat ether derivatives strongly suggested that this high Ag(+) selectivity is a result of the synergistic coordination of the ring oxygen and the sulfur atom of the thiolariat ether. NMR chemical shifts of protons and carbons in the proximity of the sulfur atom of the thiolariat ether were changed significantly in accordance with the synergistic coordination described above. 1:1 Complexation between a thiolariat ether and Ag(+) were supported by a Job plot using the chemical shift of the methylene protons adjacent to the sulfur atom.