Characterization of glucoamylase immobilized on celite

Immobilization of glucoamylase (EC 3.2.1.3) on Celite R649 bio-catalyst carrier for hydrolysis of maltose and maltodextrin has been investigated in both packed bed and recirculated batch reactors. The kinetics parameters on the hydrolysis of maltose were estimated from the packed bed reactor. It is found that this immobilized enzyme is as efficient as the soluble enzyme in catalyzing hydrolysis of maltose. However, it is less efficient than the soluble enzyme in hydrolyzing 30% (w/v) maltodextrin, giving a maximum dextrose equivalent (DE) value of 96.0% instead of 98.2%.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Production of 1,3-propanediol by Klebsiella pneumoniae

1,3-Propanediol (1,3-PD) has numerous applications from polymers to cosmetics, foods, lubricants, and medicines. Recently, there are strong industrial interests in a new kind of polyester, polytrimethylene terephthalate, with 1,3-PD as a monomer. This new polyester shows significant promise for use in carpeting and textiles. In this article we introduce a mild aerobic fermentation process using a strain screened from Klebsiella pneumoniae ATCC 25955, which is insensitive to oxygen, to produce 1,3-PD. We also describe a two-step fermentation process starting with glucose that was converted into glycerol with a glycerol-producing yeast, followed by K. pneumoniae that converts glycerol into 1,3-PD without intermediate isolation and purification of glycerol.     

Effects of pressure pulsation on oxygen transfer rate measured by sulfite method

Pressure pulsation (PP) was investigated for its effects on oxygen transfer rate (OTR) measured by sulfite oxidation. By manipulating airflow rate, 0.41–1.2 vvm, and a control valve in a 4-L bioreactor, the frequency of PP was varied at different gas pressures3–15 psig. A mathematical model of OTR was built and compared to experimental data. OTR was also examined at constant gas pressure, 4.5–15.0 psig. The results indicate a good agreement between measurement and model prediction. OTR above 9 psig during PP showed significant enhancement at 25°C. This proves that PP not only affects the elevation of DO level, but also increases the interfacial area and mass transfer coefficient.     

Production of 2,3- butanediol from pretreated corn cob byKlebsiella oxytoca in the presence of fungal cellulase

A simple and effective method of treatment of lignocellulosic material was used for the preparation of corn cob for the production of 2,3-butanediol byKlebsiella oxytoca ATCC 8724 in a simultaneous saccharification and fermentation process. During the treatment, lignin, and alkaline extractives were solubilized and separated from cellulose and hemicellulose fractions by dilute ammonia (10%) steeping. Hemicellulose was then hydrolyzed by dilute hydrochloric acid (1%, wJv) hydrolysis at 100°C at atmospheric pressure and separated from cellulose fraction. The remaining solid, with 90% of cellulose, was then used as the substrate. A butanediol concentration of 25 g/L and an ethanol concentration of 7 g/L were produced byK. oxytoca from 80 g/L of corn cob cellulose with a cellulase dosage of 8.5 IFPU/g corn cob cellulose after 72 h of SSF. With only dilute acid hydrolysis, a butanediol production rate of 0.21 g/L/h was obtained that is much lower than the case in which corn cob was treated with ammonia steeping prior to acid hydrolysis. The butanediol production rate for the latter was 0.36 g/L/h.     

Design of broadband RF pulses with polynomial-phase response

The achievable bandwidth of common linear-phase RF pulses is limited by the maximum feasible B1 amplitude of the MR system. It has been shown previously, that this limitation can be circumvented by overlaying a quadratic phase in the frequency domain, which spreads the power across the pulse duration. Quadratic-phase RF pulses are near optimal in terms of achieving minimal B1max. In this work, it is demonstrated that further B1max reduction can be achieved by combining quadratic with higher-order polynomial-phase functions. RF pulses with a phase response up to tenth order were designed using the Shinnar-Le Roux transformation, yielding considerable increases in bandwidth and selectivity as compared to pure quadratic-phase pulses. These benefits are studied for a range of pulse specifications and demonstrated experimentally. For B1max = 20 microT and a pulse duration of 2.1 ms, it was possible to increase the bandwidth from 3.1 kHz for linear and 3.8 kHz for a quadratic to 9.9 kHz for a polynomial-phase pulse.     

On the entropic perturbation and exponential penalty methods for linear programming

This note points out that the recently proposed exponential penalty approach to linear programming is identical to the well-known entropic perturbation approach. The primal and dual trajectories provided by these two approaches are shown to be equivalent.The work of the first author was supported partially by the North Carolina Supercomputing Center and 1995 Cray Research Grant.     

A Polarization-Stabilized Fiber-Optical Output Infrared Laser Source

In this paper, we successfully invented a polarization controlled light source for coherent or noncoherent fiber communication systems. The structure of our experiment includes 89C51 control board and feedback circuit which can stabilize states of polarization (SOPs) of output light. From the SOP modulation results, the given degree of polarization can be effectively controlled and the polarization state can be arbitrarily changed.