Low temperature scanning force microscopy of the Si(111)-(7x7) surface

A low temperature scanning force microscope (SFM) operating in a dynamic mode in ultrahigh vacuum was used to study the Si(111)- (7x7) surface at 7.2 K. Not only the twelve adatoms but also the six rest atoms of the unit cell are clearly resolved for the first time with SFM. In addition, the first measurements of the short range chemical bonding forces above specific atomic sites are presented. The data are in good agreement with first principles computations and indicate that the nearest atoms in the tip and sample relax significantly when the tip is within a few A of the surface.     

Measurement of Homonuclear J-Couplings from Spin-State Selective Double-/Zero-Quantum Two-Dimensional NMR Spectra

¹H-detected two-dimensional double-/zero-quantum experiments are described for measurement of homonuclear ²J_HH-couplings of NH₂ or CH₂ groups in proteins. These experiments utilize multiple-quantum coherence for determination of the size and the absolute sign of the geminal scalar and dipolar couplings in the presence of broad lines. Spectra are simplified by gradient selection and spin-state selective filters.     

Measurement of homonuclear (2)J-couplings from spin-state selective double-/zero-quantum two-dimensional NMR spectra.

(1)H-detected two-dimensional double-/zero-quantum experiments are described for measurement of homonuclear (2)J(HH)-couplings of NH(2) or CH(2) groups in proteins. These experiments utilize multiple-quantum coherence for determination of the size and the absolute sign of the geminal scalar and dipolar couplings in the presence of broad lines. Spectra are simplified by gradient selection and spin-state selective filters.     

Effect of variable ambient temperature on fin efficiency in a two-dimensional flow passage

The fin efficiency in a heat exchanger element that is a simplification of one row in a tube-and-fin heat exchanger was theoretically examined within wide ranges of the affecting variables: the conventional fin efficiency and the isothermal effectiveness of the heat exchanger. These variables are suggested for use also in the further studies. An analytical solution can be found for the case of a constant heat transfer coefficient. The ambient temperature variation alone decreases the fin efficiency less than 4%. The local heat transfer coefficient obtained from the numerical fluid flow simulations is strongly affected by the fin properties because the thermal boundary conditions for the fluid flow changes. On a poorly conducting fin surface the heat transfer coefficient in front of the fin base is much larger than on an isothermal fin because the heat flux is increasing in the flow direction. At low fin efficiencies this compensates for the decrease in fin efficiency due to ambient temperature variation.     

Versatile bio-ink for covalent immobilization of chimeric avidin on sol-gel substrates

A bio-ink for covalent deposition of thermostable, high affinity biotin-binding chimeric avidin onto sol-gel substrates was developed. The bio-ink was prepared from heterobifunctional crosslinker 6-maleimidohexanoic acid N-hydroxysuccinimide which was first reacted either with 3-aminopropyltriethoxysilane or 3-aminopropyldimethylethoxysilane to form silane linkers 6-maleimide-N-(3-(triethoxysilyl)propyl)hexanamide or -(ethoxydimethylsilyl)propyl)-hexanamide. C-terminal cysteine genetically engineered to chimeric avidin was reacted with the maleimide group of silane linker in methanol/PBS solution to form a suspension, which was printed on sol-gel modified PMMA film. Different concentrations of chimeric avidin and ratios between silane linkers were tested to find the best properties for the bio-ink to enable gravure or inkjet printing. Bio-ink prepared from 3-aminopropyltriethoxysilane was found to provide the highest amount of active immobilized chimeric avidin. The developed bio-ink was shown to be valuable for automated fabrication of avidin-functionalized polymer films.     

Measurement of (1)J(NC') and (2)J(H(N))(C') couplings from spin-state-selective two-dimensional correlation spectrum.

A method for the measurement of (1)J(NC') and (2)J(H(N))(C') coupling constants from a simplified two-dimensional [(15)N, (1)H] correlation spectrum is presented. The multiplet components of the (1)J(NC') doublet in the indirect dimension and (2)J(H(N))(C') in the direct dimension are separated into two subspectra by spin-state-selective filters. Thus each subspectrum contains no more peaks than the conventional [(15)N, (1)H]-HSQC spectrum. Furthermore, the method for the measurement of (1)J(NC') and (2)J(H(N))(C') is designed to exploit destructive relaxation interference (TROSY). The results are verified against the measurements of (1)J(NC') from spin-state-selective [(13)C', (1)H] correlation spectra recorded with additional sequence described here.     

Ultrasonic depolymerization of aqueous polyvinyl alcohol.

Ultrasonication has proved to be a highly advantageous method for depolymerizing macromolecules because it reduces their molecular weight simply by splitting the most susceptible chemical bond without causing any changes in the chemical nature of the polymer. Most of the effects involved in controlling molecular weight can be attributed to the large shear gradients and shock waves generated around collapsing cavitation bubbles. In general, for any polymer degradation process to become acceptable to industry, it is necessary to be able to specify the sonication conditions which lead to a particular relative molar mass distribution. This necessitates the identification of the appropriate irradiation power, temperature, concentration and irradiation time. According to the results of this study the reactors constructed worked well in depolymerization and it was possible to degrade aqueous polyvinyl alcohol (PVA) polymer with ultrasound. The most extensive degradation took place at the lowest frequency used in this study, i.e. 23 kHz, when the input power was above the cavitation threshold and at the lowest test concentration of PVA, i.e. 1% (w/w). Thus this study confirms the general assumption that the shear forces generated by the rapid motion of the solvent following cavitational collapse are responsible for the breakage of the chemical bonds within the polymer. The effect of polymer concentration can be interpreted in terms of the increase in viscosity with concentration, causing the molecules to become less mobile in solution and the velocity gradients around the collapsing bubbles to therefore become smaller.     

Radiation properties of ICRF waveguide couplers

The radiation spectra of a dielectric-filled waveguide (DWG) and a folded waveguide (FWG) antenna in the ion cyclotron range of frequencies are evaluated for tokamaks with the waveguide codes, which model the coupling of the waveguide modes to the plasma waves with outward radiating boundary conditions. The codes provide a self-consistent calculation of the fields across the waveguide apertures for various antenna phasings taking into account a complete set of waveguide eigenmodes including the reflected modes and, in the case of DWG, an arbitrary orientation of the antenna to the plasma magnetic field. In the studied cases, the spectra are found to be well described by a model which is based on a simplified wave field pattern determined by the antenna aperture geometry. Comparison to the corresponding loop antenna is carried out