Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

Co-immobilization of polymeric luminol,iron(II) tris(5-aminophenanthroline) and glucose oxidase at an electrode surface,and its application as a glucose optrode

The anodic polymerization of 3-aminophthalhydrazide (luminol) and iron(II) tris 5-aminophenanthroline (Fe(phen-NH2)3(2+)) has been reported in this paper. A bilayer electrode was developed based on these polymers and the ITO conductive glass (denoted ITO[Fe(phen-NH2)3(2+)]luminol electrode). This electrode emitted light (lambdaem: 430 nm) as it was brought into contact with H2O2. At pH 10, the resulting electrochemiluminescence (ECL) showed a linear relationship with the concentration of H2O2 in the range of 10 microM(-1) mM. This bilayer electrode also showed an application potential for the detection of glucose after being further modified with glucose oxidase (denoted ITO[Fe(phen-NH2)3(2+)]luminol]GOx electrode). Although the resulting ECL decayed more rapidly in concentrated glucose solutions (e.g., I M) because of the consumption of luminol during use, the decay became less severe in diluted glucose solutions (e.g., 10 mM). According to the flow injection analysis, a linear relationship existed between the ECL and the concentration of glucose from 10(-5)-10(-3) M at pH 9. The detection limit could reach a level of 5 x 10(-5) M at this pH.     

Non-chair six-membered-ring conformations. Preference for a twist-boat (or skew) structure in α- -sorbopyranose derivatives

The conformational preferences for 2,3-O-isopropylidene-α- -sorbopyranose derivatives 3–6 were determined by using ¹H NMR data and empirical force field calculations. Proton NMR studies of 3–6 indicate that a twist-boat (or skew) conformation (³S₀) prevails over possible chair forms for each compound. Force-field calculations (MM2, MNDO, AM1) on a model 2,3-O-isopropylidene-α- -sorbopyranose system (18) indicate that the ³S₀ conformation is among the low-energy structures. X-Ray crystallographic analysis of α- -sorbopyranose sulfamate 3, a compound with potent anticonvulsant activity, demonstrates that the ³S₀ skew conformation is manifested in the solid state, as well.     

Semirigorous bounds for the overlap of approximate wavefunctions

Alexander's probable upper and lower bounds to the overlap S between an approximate and the true wavefunctions are based on second-order perturbation theory and a special ordering of configurations. These weak points are removed in the present treatment and replaced by an exact expression for the energy lowering, plus a very reasonable postulate. The resulting lower bound to the overlap S is illustrated with examples taken from the literature.     

Comparative inhibition by substrate analogues 3-methoxy- and 3-hydroxydesaminokynurenine and an improved 3 step purification of recombinant human kynureninase.

Background  

Kynureninase is a key enzyme on the kynurenine pathway of tryptophan metabolism. One of the end products of the pathway is the neurotoxin quinolinic acid which appears to be responsible for neuronal cell death in a number of important neurological diseases. This makes kynureninase a possible therapeutic target for diseases such as Huntington's, Alzheimer's and AIDS related dementia, and the development of potent inhibitors an important research aim.     

Microporous activated carbons prepared from palm shell by thermal activation and their application to sulfur dioxide adsorption

Textural characterization of activated carbons prepared from palm shell by thermal activation with carbon dioxide (CO(2)) gas is reported in this paper. Palm shell (endocarp) is an abundant agricultural solid waste from palm-oil processing mills in many tropical countries such as Malaysia, Indonesia, and Thailand. The effects of activation temperature on the textural properties of the palm-shell activated carbons, namely specific surface area (BET method), porosity, and microporosity, were investigated. The activated carbons prepared from palm shell possessed well-developed porosity, predominantly microporosity, leading to potential applications in gas-phase adsorption for air pollution control. Static and dynamic adsorption tests for sulfur dioxide (SO(2)), a common gaseous pollutant, were carried out in a thermogravimetric analyzer and a packed column configuration respectively. The effects of adsorption temperature, adsorbate inlet concentration, and adsorbate superficial velocity on the adsorptive performance of the prepared activated carbons were studied. The palm-shell activated carbon was found to have substantial capability for the adsorption of SO(2), comparable to those of some commercial products and an adsorbent derived from another biomass.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.