Theoretical investigation of encapsulation processes of C60 into single-wall carbon nanotubes

The encapsulation of C₆₀ into single-wall carbon nanotubes is systematically studied by tight-binding molecular dynamics method with an appropriate long-range Lennard-Jones potentials. For a (16,0) nanotube, it is impossible to encapsulate C₆₀ into the tube because of a much larger energy barrier with the relaxation of the open end.     

Simulation of container filling process with two inlets by improved smoothed particle hydrodynamics (SPH) method

In this article, an improved smoothed particle hydrodynamics (SPH) method is proposed to simulate the filling process with two inlets. Improvements are achieved by deriving a corrected kernel gradient of SPH and a density re-initialisation. In addition, a new treatment of solid wall boundaries is presented. Thus, the improved SPH method has higher accuracy and better stability, and conserves both linear and angular momentums. The validity of the new boundary treatment is shown by simulating the spin-down problem. The bench tests are also presented to demonstrate the performance of the improved SPH method. Then the filling process with a single inlet is simulated to show the ability to capture complex-free surface of the proposed method. Finally, the filling process with two inlets is numerically investigated. The numerical results show that the filling patterns are affected significantly by Reynolds number, aspect ratio of the container and the location of the inlets.     

一种烟气冷却器的研制

介绍了某型烟气冷却器的设计思路,主要从结构的紧凑性、制冷系统的匹配等方面给予了阐述,通过实际应用说明了其设计的可行性,证明设计是成功的.     

Hydrogen bonding interactions,crystallization, and surface hydrophobicity in nanostructured epoxy/block copolymer blends

Hydrogen bonding interactions, phase behavior, crystallization, and surface hydrophobicity in nanostructured blend of bisphenol A‐type epoxy resin (ER), for example, diglycidyl ether of bisphenol A (DGEBA) and poly(ε‐caprolactone)‐block‐poly(dimethyl siloxane)‐block‐poly(ε‐caprolactone) (PCL–PDMS–PCL) triblock copolymer were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, transmission electron microscopy, small‐angle X‐ray scattering, and contact angle measurements. The PCL–PDMS–PCL triblock copolymer consisted of two epoxy‐miscible PCL blocks and an epoxy‐immiscible PDMS block. The cured ER/PCL–PDMS–PCL blends showed composition‐dependent nanostructures from spherical and worm‐like microdomains to lamellar morphology. FTIR study revealed the existence of hydrogen bonding interactions between the PCL blocks and the cured epoxy, which was responsible for their miscibility. The overall crystallization rate of the PCL blocks in the blend decreased remarkably with increasing ER content, whereas the melting point was slightly depressed in the blends. The surface hydrophobicity of the cured ER increased upon addition of the block copolymer, whereas the surface free energy (γ_s) values decreased with increasing block copolymer concentration. The hydrophilicity of the epoxy could be reduced through blending with the PCL–PDMS–PCL block copolymer that contained a hydrophobic PDMS block. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 790–800, 2010     

Photometric, colorimetric, and acid-base characteristics of nitroso-R-salt

Optical and colorimetric characteristics of 1-nitroso-2-naphthol-3,6-disulfonic acid (nitroso-R-salt) are studied in aqueous solutions at pH 4–10. Equations of calibration plots are obtained as the colorimetric functions of the concentration, and the molar coefficients of the colorimetric functions are calculated. The dissociation constants of nitroso-R-salt are determined by colorimetry at an ionic strength of 0.1–0.5, reduced to zero ionic strength, and compared with the literature data. Advantages of colorimetry over spectrophotometry in the determination of the dissociation constants of colored reagents are demonstrated.     

Field Patterns of the TE Modes in Ridge-Trough Waveguide

A single-ridge waveguide with a symmetrical longitudinal trough, designated as a ridge-trough waveguide has been used as a transition in a V-band (50-75 GHz) wafer probe recently. In this paper, the field patterns for the dominant TE mode and the first higher TE mode in ridge-trough waveguide with different configurations are presented by finite element method. The field patterns in this paper have important values for us to understand the transmission characteristics of ridge-trough waveguide, and will be of practical significance in designing ridge-trough waveguide components in microwave and millimeter wave engineering.     

A Cartesian‐grid collocation method based on radial‐basis‐function networks for solving PDEs in irregular domains

This paper reports a new Cartesian‐grid collocation method based on radial‐basis‐function networks (RBFNs) for numerically solving elliptic partial differential equations in irregular domains. The domain of interest is embedded in a Cartesian grid, and the governing equation is discretized by using a collocation approach. The new features here are (a) one‐dimensional integrated RBFNs are employed to represent the variable along each line of the grid, resulting in a significant improvement of computational efficiency, (b) the present method does not require complicated interpolation techniques for the treatment of Dirichlet boundary conditions in order to achieve a high level of accuracy, and (c) normal derivative boundary conditions are imposed by means of integration constants. The method is verified through the solution of second‐ and fourth‐order PDEs; accurate results and fast convergence rates are obtained. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007