Immobilization of bovine serum albumin on TiO2 film via chemisorption of H3PO4 interface and effects on platelets adhesion

In the present study, bovine serum albumin (BSA) was successfully covalently immobilized on the surface of anatase TiO₂ film by a three-step method, i.e. application of H₃PO₄ chemisorption to increase surface -OH, which increases the amount of coupling 3-aminopropyl-triethoxylsilane (APTES), thus linking with BSA by imide bond using EDC/NHS/MES. There is no significant -OH group increase on rutile film when using the same method of phosphoric acid treatment, which suggest it is difficult for further chemical modification of the rutile film. After covalent immobilization of BSA on anatase film, an improved hemocompatibility of anti-platelet adhesion and aggregation in vitro could be recognized by LDH and SEM analysis. This study suggests BSA-immobilized anatase surface can serve as hemocompatibility material in vivo.     

Observation of a new DsJ meson in B+-->D0D0K+ decays

We report the observation of a new DsJ meson produced in B+-->D0DsJ-->D0D0K+. This state has a mass of M=2708+/-9(-10)(+11) MeV/c2, a width Gamma=108+/-23(-31)(+36) MeV/c2 and a 1- spin-parity. The statistical significance of this observation is 8.4 sigma. The results are based on an analysis of 449 x 10(6) BB events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider.     

The transient suppression for piezoelectric ceramic emission transducer

A transient suppression method for piezoelectric ceramic transducer is presented. By adding some special pedestal pulses to the original transmitted signal, the transient effects in the output of the transducer can be just precisely transmission by use of a narrowband transducer. canceled, thereby achieving the broadband The experimental results show that the transient responses of the sinusoid pulses and coded signals are suppressed successfully and the acoustic waveforms radiated into the surrounding water are improved significantly.     

单块晶体集成的N×N纵横开关网络及其控制算法

设计了一种单块晶体集成的n×n纵横开关(Crossbar)网络。通过综合考虑晶体的双折射和全内双反射现象,以及晶体的电光效应,将构成n×n纵横开关网络的所有单元器件都集成到一块具有电光效应的双折射晶体上。同时,给出了该网络的控制算法,通过对开关工作状态的控制,可以实现任意输入输出通道之间的无阻塞连接。这种单块晶体集成的纵横开关网络具有能量损耗低、无阻塞、易安装、抗干扰等优点,适合于全光网络发展的需要。     

Dispersion of multi-stream instability in quantum magnetized hot plasmas

Using the quantum hydrodynamic (QHD) equations with magnetic field on the Wigner-Maxwell system, the general dielectric tensor and dispersion equation for quantum plasmas were derived. Dispersion relations of one-, two-stream and beam-plasma instabilities in uniform quantum magnetized plasmas are investigated through the new dielectric tensor. The magnetic field which is parallel to the fluid velocity does not work on stream instabilities. The quantum and thermal effects have remarkable impact on two-stream instability. The critical wave number for beam-plasma instability with quantum effects correction is given too.     

Some non-abelian phase spaces in low dimensions

A non-abelian phase space, or a phase space of a Lie algebra, is a generalization of the usual (abelian) phase space of a vector space. It corresponds to a para-Kähler structure in geometry. Its structure can be interpreted in terms of left-symmetric algebras. In particular, a solution of an algebraic equation in a left-symmetric algebra which is an analogue of classical Yang–Baxter equation in a Lie algebra can induce a phase space. In this paper, we find that such phase spaces have a symplectically isomorphic property. We also give all such phase spaces in dimension 4 and some examples in dimension 6. These examples can be a guide for a further development.     

Low-field magnetoresistance of Ag-substituted perovskite-type manganites

A series of bulk polycrystalline Nd_1−xAg_xMnO₃ samples were prepared by conventional solid-state reaction processing, for x between 0.1 and 0.5. The structure, magnetism, and magnetoresistance (MR) of the samples are investigated. The X-ray diffraction patterns show that the x=0.1 sample is a single perovskite structure, while x0.167, samples consist of a ferromagnetic perovskite phase and two nonmagnetic phases, Ag and Mn₃O₄. The MR of Nd_1−xAg_xMnO₃ is enhanced by increasing the composition of Ag. Compared with the sample of x=0.1, the x=0.5 sample has a significantly larger value of low-field MR. The enhanced low-field MR is related to the spin-dependent scattering of spin-polarized electrons at the interfaces between the perovskite grains and silver granules.     

High-resolution photorefractive gratings in nematic liquid crystals sandwiched with photoconductive polymer film

Photorefractive gratings with high grating resolution were observed in the 20 μm thick low-molar-mass nematic liquid crystal (NLC) cell with a separate photoconductive (PC) poly(N-vinylcarbazole) layer. An orientational grating with a grating spacing of 1.9 μm was produced. It is believed that a space–charge field with small fringe spacing forms in the PC layer and its evanescent component penetrates into the NLC layer. The penetrated evanescent field drives the NLC to reorient, and consequently the orientational grating forms. The model indicates that the modulated field exists in several hundred nanometers near the surface, and thus the orientational grating is not full of the NLC film, which is consistent with the observed phenomena of the multiple diffractions. Besides, asymmetric two-beam coupling of 11.2% was achieved for the grating with a grating spacing of 1.9 μm, and a net gain coefficient of larger than 62 cm⁻¹ was obtained.     

Transmission property for a one-dimensional photonic crystal containing a subwavelength layer and a nonlinear layer

Using the transfer matrix method, we investigate the transmission property of a one-dimensional photonic crystal doped with a linear subwavelength layer and a Kerr-type nonlinear layer. We find that a thin film of subwavelength layer can significantly modify the characteristic of optical bistability. We also find that the sequence of the thin film and the nonlinear layer has a major impact on the hysteretic behavior. With the investigations to the linear defect mode and the electric field distribution in the nonlinear material, we explain these phenomena. PACS 42.65.Pc; 42.25.Bs; 42.70.Qs; 42.65.-k; 78.66.-w     

Facile liquid phase deposition of thick reflective GeO2 film for hollow waveguide delivery of CO2 laser radiation

A new idea of using LPD (liquid phase deposition) to prepare a GeO₂ thick reflective film for hollow waveguide delivery of CO₂ laser radiation was investigated in this work. The LPD process was achieved by designedly adding acid to GeO₂–aqueous ammonia. The addition of acid could induce the transformation of germanate ions into GeO₂ solutes, leading to the deposition of a GeO₂ ceramic film when the concentration of GeO₂ solute is higher than its saturation solubility. It was found that the highest film growth rate occurred at a pH value of 3, while a film with low surface roughness and good adhesion to the substrate was produced at a pH value of 2 and the film could be converted to a smooth, compact hexagonal GeO₂ film by heat treatment at 1120 °C for 30 min. Two abnormal dispersion bands within 7.6–9 μm and 9.6–11.2 μm were mainly caused by the silica glass substrate and the GeO₂ film, respectively. The film was thick enough to achieve the total reflectance of the CO₂ laser radiation. The use of this GeO₂ film in a hollow waveguide structure for CO₂ laser radiation delivery is discussed based on the transmission loss and the feasibility of the deposition of the GeO₂ film inside silica capillary tubes. The results show that the hollow waveguides with low transmission loss are most likely fabricated at a low cost using the LPD-derived GeO₂ reflective film. PACS 78.20.-e; 78.66.-w; 42.70.-a; 78.20.Ci; 78.40.-q