Preparation of Fluorine-Containing Polyacrylate Emulsion by a UV-initiated Polymerization

A fluorine-containing polyacrylate emulsion was synthesized by a UV-initiated emulsion polymerization from methyl methacrylate (MMA) and hexafluorobutly methacrylate (HFMA) in the presence of 2-hydroxy-4-(2-hydroxyethoxy)-2-methyl-propiophenone (Irgacure 2959) as a hydrophilic photoinitiator at room temperature. The latex and films were characterized by Fourier transformed infrared (FT-IR) spectrometry, nuclear magnetic resonance (¹H-NMR, ¹⁹F-NMR) spectrometry, transmission electron microscopy (TEM), recycling gel permeation chromatography (GPC), dynamic light scattering (DLS), and contact angle (CA) analysis, respectively. The effects of photoinitiator and emulsifier concentration on the polymerization were discussed. Compared to the corresponding thermal polymerization, UV-initiated polymerization of the MMA/HFMA emulsion could be accomplished at a much higher speed. The polymerization conversion in UV-initiated polymerization reached 95% within 10 min at an emulsifier concentration of 0.6 wt%, photoinitiator concentration of 0.4 wt%, and monomer concentration of 10 wt%.     

Synthesis and characterization of intrinsic high‐barrier polyimide derived from a novel diamine monomer containing rigid planar moiety

A new diamine monomer containing rigid planar fluorenone moiety, 2,7‐bis(4‐aminophenyl)‐9H‐fluoren‐9‐one, was synthesized through Suzuki coupling reaction. Then it was reacted with pyromellitic dianhydride to obtain a polyimide (FOPPI) via a conventional two‐step polymerization process. The prepared FOPPI exhibits excellent barrier properties, with the oxygen transmission rate and water vapor transmission rate low to 3.2 cm³·m^?2·day^?1 and 2.9 g·m^?2·day^?1, respectively. The results of wide angle X‐ray diffractograms, positron annihilation lifetime spectroscopy, and molecular dynamics simulations reveal that the excellent barrier properties of FOPPI are mainly ascribed to the crystallinity, high chain rigidity, and low free volume, which are resulted from the rigid planar moiety. FOPPI also shows outstanding thermal stability and mechanical properties with a glass transition temperature up to 420 °C, 5% loss temperature of 607 °C, coefficient of thermal expansion of 1.28 ppm K^?1, and tensile strength of 150.8 MPa. The polyimide has an attractive potential application prospect in the flexible electronics encapsulation area. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2373–2382     

Zero singularities in a ring network with two delays

In this paper, we consider a neural network model consisting of three neurons with delayed self- and nearest-neighbor connections. We provide multiple bifurcations of the zero solution of the system near zero eigenvalue singularity. Taking the coupling coefficients as the bifurcation parameters, four kinds of zero singularities are demonstrated through center manifold reduction and normal form calculation.     

A new method for preparing TiO2 catalyst honeycombs without sintering

Composite catalyst honeycombs without sintering were prepared via kneading, mulling, extrusion molding, and solidifying at room temperature with the magnesite oxychloride gels modified by nano-rice husk ash (RHA) as a solidifying agent. The effects of nano-RHA and composite water-resistant agents on the water resistance of magnesite materials were studied. The solidification of the modified magnesite gels on TiO₂ catalyst honeycombs was analyzed. The experiments show that the proportional addition of nano-RHA markedly increases the water resistance of magnesite materials without reducing the bending strength, and the softening coefficient increases from 0.29 to 0.78. With further addiition of the complex water-resistant agents, the softening coefficient increases from 0.78 to 0.97. The optimal mass ratio of MgO in the solidifying agent to TiO₂ is 4:1, and the bending strength of unsintered catalyst honeycombs is 11.46 MPa. The desulfurization rate and denitration rate of this composite catalyst honeycomb on simulation smoke was 97 and 65 %, respectively, in 3 h.     

Rheological Technique as a Sensitive Method to Characterize the Chain Diffusion across the Interface between Polystyrene and Carbon Black Filled Polystyrene

The mutual diffusion process and interphase development taking place at the interface between disks of polystyrene (PS) and carbon black filled polystyrene (CB-PS) in the molten state were investigated by a small-amplitude, oscillatory shear, rheological technique. The rheological method was employed to probe the thermorheological complexity of these polymer disks. It was found that the dynamic complex shear modulus, G*(t), increased with the time of contact in two time regimes at a fixed frequency. The time of transition between the two regimes was observed to be close to the time needed for the transition from the Rouse mode to the reptation mode. The results showed that the content of the carbon black and the temperature affected the slope of the G*(t) – t curve. Scanning electron microscopy revealed the interface disappeared when the diffusion process was complete.     

A novel efficient medium for chromogenic catalysis of tetramethylbenzidine with horseradish peroxidase

The traditional surfactant sodium dodecyl sulfate (SDS) and ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF₄]) have been combined to create a novel efficient medium for chromogenic catalysis of 3,3',5,5'-tetramethylbenzidine with horseradish peroxidase in presence of H₂O₂. The results have shown the [Emim][BF₄] in the mediums can promote the rate of formation of the blue chromogen, the SDS is responsible for the stabilization of the blue chromogen due to the electrostatic attraction between positively charged blue chromogen and the negatively charged surfactant. The SDS/[Emim][BF₄] combination not only enhance catalytic activity of HRP remarkably but also stabilize the blue chromogen formed in the HRP oxidation of the substrate TMB compared to the conventional medium. Based on the superior combination of SDS and [Emim][BF₄], the colorimetric assay for detecting HRP activity and H₂O₂ concentration was established. This work demonstrates a novel efficient medium for chromogenic catalysis with potential applications in biosensors and clinical diagnosis.     

Synthesis of the melatonin receptor agonist Ramelteon using a tandem C–H activation–alkylation/Heck reaction and subsequent asymmetric Michael addition

An asymmetric synthesis of the melatonin receptor agonist Ramelteon 1 has been achieved, which involved a tandem C–H activation–alkylation/Heck reaction and subsequent highly diastereoselective asymmetric Michael addition to generate the corresponding chiral intermediate, which was readily converted into Ramelteon 1 in 19% overall yield in 15 linear steps.     

Hydrothermal synthesis and characterization of NiS flower-like architectures

Under the influence of thiocyanate anions (SCN^?) and cetyltrimethyl ammonium bromide (CTAB), NiS flower-like architectures were successfully synthesized by a one-step hydrothermal method. The synthesized flower-like architectures, with a multilayered and highly ordered texture, have diameters of several micrometers. X-ray powder diffraction (XRD) shows that the NiS flower-like architectures are rhombohedral crystalline. On the basis of condition-dependent experiments, the diffusion-limited aggregation (DLA) model and cage effect were used to explain the growth process of rhombohedral crystalline NiS flower-like architectures. Magnetic measurements showed that the coercivity (H_c) of the as-obtained NiS flower-like architectures was 102.14 Oe.     

Diffraction effects in planar wave-sphere interaction

Using the classical Mie scattering theory,we compute the energy density of an arbitrary partial wave(e.g.,the nth order) and then determine that the interaction between an incident planar wave and a sphere of radius a is the one between the sphere and those partial waves the order of which satisfies n≤ka.We also provide a simple expression to describe the diffracted wave in which the angle-dependent functions are employed.The difference between the accurate and the approximate expressions is demonstrated by numerical calculation.