A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

Rapid determination of catecholamines in urine samples by nonaqueous microchip electrophoresis with LIF detection

A method was developed for the rapid separation of catecholamines by nonaqueous microchip electrophoresis (NAMCE) with LIF detection, A homemade pump‐free negative pressure sampling device was used for rapid bias‐free sampling in NAMCE, the injection time was 0.5 s and the electrophoresis separation conditions were optimized. Under the optimized conditions, the samples were separated completely in <1 min. The average migration times of the epinephrine (E), dopamine (DA), and norepinephrine (NE) were 34.26, 43.81, and 50.07 s, with an RSD of 1.05, 1.26, and 0.89% (n = 7), respectively. The linearity of the method ranged from 0.0125 to 2.0 mg/L for E and 0.025～4.0 mg/L for DA and NE, with correlation coefficients ranging between 0.9978 and 0.9986. The detection limits of E, DA, and NE were 2.5, 5.0, and 5.0 μg/L, respectively. The recoveries of E, DA, and NE in spiked urine samples were between 86 and 103%, with RSDs of 4.5～6.8% (n = 5). The proposed NAMCE with LIF detection combined with a pump‐free negative pressure sampling device is a simple, inexpensive, energy efficient, miniaturized system that can be successfully applied for the determination of catecholamines in urine samples.     

Impact of photogenerated charge behaviors on luminescence of Eu3+-incorporated microporous titanosilicate ETS-10

A series of Eu³⁺-incorporated ETS-10 samples were successfully prepared based on the traditional ion exchange method. The relationship between photogenerated charge behaviors and luminescent properties has been investigated in detail. It has been demonstrated that as a result of the charge transfer from the titanate quantum wires to Eu³⁺ crystal field states, the host matrix ETS-10 functions as the sensitizer of Eu³⁺ to enhance the red luminescence, while Eu³⁺ cations contribute to the recombination of photogenerated charges. The behavior of photogenerated charges has significant impact on the luminescent properties of Eu³⁺-incorporated ETS-10 materials.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

A one‐dimensional silver(I) coordination polymer based on the 2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol ligand exhibiting photoluminescence

A one‐dimensional Ag^I coordination complex, catena‐poly[[silver(I)‐μ‐{2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol‐κ²N²:N³}] perchlorate monohydrate], {[Ag(C₁₉H₁₅N₃O)]ClO₄·H₂O}_n, was synthesized by the reaction of 2‐[2‐(pyridin‐4‐yl)‐1H‐benzimidazol‐1‐ylmethyl]phenol (L) with silver perchlorate. In the complex, the L ligands are arranged alternately and link Ag^I cations through one benzimidazole N atom and the N atom of the pyridine ring, leading to an extended zigzag chain structure. In addition, the one‐dimensional chains are extended into a three‐dimensional supramolecular architecture via O—H...O hydrogen‐bond interactions and π–π stacking interactions. The complex exhibits photoluminescence in acetonitrile solution, with an emission maximum at 390 nm, and investigation of the thermal stability reveals that the network structure is stable up to 650 K.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Porous V2O5-SnO2/CNTs composites as high performance cathode materials for lithium-ion batteries

Vanadium pentoxide (V₂O₅) exhibits high theoretical capacities when used as a cathode in lithium ion batteries (LIBs), but its application is limited by its structural instability as well as its low lithium and electronic conductivities. A porous composite of V₂O₅-SnO₂/carbon nanotubes (CNTs) was prepared by a hydrothermal method and followed by thermal treatment. The small particles of V₂O₅, their porous structure and the coexistence of SnO₂ and CNTs can all facilitate the diffusion rates of the electrons and lithium ions. Electrochemical impedance spectra indicated higher ionic and electric conductivities, as compared to commercial V₂O₅. The V₂O₅-SnO₂/CNTs composite gave a reversible discharge capacity of 198 mAh·g^?1 at the voltage range of 2.05–4.0 V, measured at a current rate of 200 mA·g^?1, while that of the commercial V₂O₅ was only 88 mAh·g^?1, demonstrating that the porous V₂O₅-SnO₂/CNTs composite is a promising candidate for high-performance lithium secondary batteries.     

Novel B,O-chelated fluorescent probe for nitric oxide imaging in Raw 264.7 macrophages and onion tissues

A novel fluorescent probe based on B,O-chelated dipyrromethene chromophore in far-visible and near-infrared spectral region (600–900 nm), boron chelated 8-(3,4-diaminophenyl)-3,5-bis(2-hydroxyphenyl)-4-bora-3a,4a-diaza-s-indancene (BOPB), has been first developed for nitric oxide (NO) imaging. BOPB, a turn-on fluorescent probe, can react with NO rapidly under physiological condition. The reaction product of BOPB with NO, BOPB-T, emits bright red fluorescence at 643 nm when excited at 622 nm. Meanwhile, BOPB-T displays high fluorescent quantum yield of 0.21 and good photostability. The selectivity for NO over other reactive oxygen/nitrogen species and ascorbic acid has been investigated and BOPB has good specificity for the detection of NO. MTT assay shows that the toxicity of BOPB (below 10 μM) to living cells can be neglected. Based on these investigations, BOPB has been used for NO imaging in Raw 264.7 cells and onion tissues. Meanwhile, mechanical injury to onion tissues results in a brighter fluorescence around the wound, which indicates that more NO has been produced in plant tissues in response to external stimuli. Our studies illustrate that BOPB has advantages of high sensitivity, low background interference and little photo damage on fluorescence imaging of NO.