Determination of galacturonic acid content in pectin from fruit juices by liquid chromatographydiode array detection-electrospray ionization tandem mass spectrometry

A reversed-phase high-performance liquid chromatographic (HPLC) method is applied for the determination of galacturonic acid (GA) of pectins in different commercial fruit juices. The separation was carried out on a C₁₈ column using precolumn derivatization with p-aminobenzoic acid (p-ABA) and UV detection at 304 nm. The identification of GA was confirmed by high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC-ESI-MS/MS) in positive ion mode. The concentration of GA in the samples analyzed ranged from 12.9 ± 0.5 to 49.4 ± 0.5 mg_GA L⁻¹. Amongst the samples analyzed, mango juice was found to be richest in GA content, and therefore a good source of pectins. Detection and quantification limits of the described methodology were 1.2 and 3.9 mg L⁻¹, respectively. Quantitative GA recoveries in the beverages had a range between 90 and 98%. The results showed that the HPLC method proposed was precise and suitable for the identification and quantification of GA in commercial fruit juices.     

Sliding friction between polymer surfaces: a molecular interpretation

For two contacting rigid bodies, the friction force F is proportional to the normal load and independent of the macroscopic contact area and relative velocity V (Amonton's law). With two mutually sliding polymer samples, the surface irregularities transmit deformation to the underlying material. Energy loss along the deformation cycles is responsible for the friction force, which now appears to depend strongly on V [see, e.g., N. Maeda et al., Science 297, 379 (2002)]. We base our theoretical interpretation on the assumption that polymer chains are mainly subjected to oscillatory "reptation" along their "tubes." At high deformation frequencies-i.e., with a large sliding velocity V-the internal viscosity due to the rotational energy barriers around chain bonds hinders intramolecular mobility. As a result, energy dissipation and the correlated friction force strongly diminish at large V. Derived from a linear differential equation for chain dynamics, our results are basically consistent with the experimental data by Maeda et al. [Science 297, 379 (2002)] on modified polystyrene. Although the bulk polymer is below T(g), we regard the first few chain layers below the surface to be in the liquid state. In particular, the observed maximum of F vs V is consistent with physically reasonable values of the molecular parameters. As a general result, the ratio FV is a steadily decreasing function of V, tending to V(-2) for large velocities. We evaluate a much smaller friction for a cross-linked polymer under the assumption that the junctions are effectively immobile, also in agreement with the experimental results of Maeda et al. [Science 297, 379 (2002)].     

A windmill-shaped hexacopper(II) molecule built up by template core-controlled expansion of diaquatetrakis(mu2-adeninato-N3,N9)dicopper(II) with aqua(oxydiacetato)copper(II)

The windmill-shaped hexanuclear copper(II) cluster {(H(2)O)(2)Cu(2)(mu(3)-(Ade)(4)[Cu(oda)(H(2)O)](4)}.6H(2)O (1-o) has been synthesized in aqueous medium by in situ core-controlled expansion of the neutral building block Cu(2)(mu(2)-N3,N9-Ade)(4)(H(2)O)(2) (2) with Cu(oda)(H(2)O) (3-o) (Ade = adeninato(1-) and oda = oxydiacetato(2-) ligands). Crystal data for 2-b (2.5H(2)O): triclinic, space group P(-)1; a = 9.374(1), b = 9.440(1), c = 10.326(1) A; alpha = 78.72(1), beta = 76.77(1), gamma = 63.51(1) degrees ; final R(1) = 0.059; T = 100(2) K. Crystal data for 1-o: monoclinic, space group P2(1)/n; a = 15.203(2), b = 10.245(1), c = 19.094(2) A; beta = 101.61(1) degrees ; final R(1) = 0.049; T = 293(2) K. The X-shaped hexanuclear molecule consists of a central core (2) and four terminal arms (3-o) linked together by bridging mu(3)-N3,N7,N9-Ade ligands. There are three crystallographic independent metal atoms (two terminals, one central). All Cu(II) atoms exhibit a 4 + 1 coordination, of which one is an aqua apical ligand. The basal coordination sets complete the CuN(4) + O or CuO(3)N + O chromophores for the central or terminal metal atoms, respectively. Thermal stability and spectral and magnetic properties were also studied. Analogous compounds to 1-o with tridentate or tripodal tetradentate ligands L(2-), instead of oda, have also been synthesized.     

Development of a common fully stereocontrolled access to the medicinally important and promising prostacyclin analogues iloprost, 3-oxa-iloprost and cicaprost

We describe new fully stereocontrolled syntheses of the prostacyclin analogues iloprost (2), the most active component of the drugs Ilomedin and Ventavis, and 3-oxa-iloprost (3), a derivative that is expected to have a significantly higher metabolic stability than 2 perhaps allowing an oral application. The syntheses are based on the same strategy and chiral bicyclic building block as used in the synthesis of cicaprost (4), the third most potent analogue that exhibits, besides prostacyclin-like activities, antimetastatic activities. Reaction of the enantiopure C6-C13 bicyclic aldehyde 17 with Cl(3)CCOOH/Cl(3)CCOONa afforded trichlorocarbinol 24 which was converted via mesylate 25 to the C6-C14 bicyclic alkyne 9. The palladium-catalysed hydrostannylation of alkyne 9 gave with high regio- and stereoselectivity the alkenylstannane 26, Sn/Li exchange of which afforded the E-configured alkenyllithium derivative 8. Coupling of the C6-C14 building block 8 with the enantiopure C15-C20 building block, the N-methoxyamide 7, gave the C6-C20 bicyclic ketone 6 in high yield without epimerisation at C16. The configuration at C15 of iloprost (2) and 3-oxa-iloprost (3) was established through a highly diastereoselective reduction of ketone 6 with catecholborane and the chiral oxazaborolidine 28 which furnished alcohol (15S)-29. The highly stereoselective conversions of alcohol (15S)-29 to iloprost (2) and 3-oxa-iloprost (3), which include as key stereoselective steps an olefination with a chiral phosphonoacetate and a copper-mediated allylic alkylation, have already been described.     

Rund ums Aluminium. Schülerlabor und Tandemfortbildung

The economic cycle of aluminium is a didactical concept both for school and university. The student laboratory project presented allows the concrete implementation. Based on the simultaneous education between industry and didactics of chemistry is the illustrated teacher education. This concept is easily transferable to other topics, so that school, university and industry can interact more often with each other.     

Bounds on the tight-binding approximation for the Gross-Pitaevskii equation with a periodic potential

We justify the validity of the discrete nonlinear Schrödinger equation for the tight-binding approximation in the context of the Gross-Pitaevskii equation with a periodic potential. Both piecewise-constant and smooth potentials are considered in the semi-classical limit. While justification of stationary equations is developed in our previous work (Pelinovsky et al. (2008) [11]), this work deals with time-dependent space-decaying solutions on large but finite time intervals.     

Tailored Transition-Metal Coordination Environments in Imidazole-Modified DNA G-Quadruplexes

Two types of imidazole ligands were introduced both at the end of tetramolecular and into the loop region of unimolecular DNA G-quadruplexes. The modified oligonucleotides were shown to complex a range of different transition-metal cations including Ni^II, Cu^II, Zn^II and Co^II, as indicated by UV/Vis absorption spectroscopy and ion mobility mass spectrometry. Molecular dynamics simulations were performed to obtain structural insight into the investigated systems. Variation of ligand number and position in the loop region of unimolecular sequences derived from the human telomer region (htel) allows for a controlled design of distinct coordination environments with fine-tuned metal affinities. It is shown that Cu^II, which is typically square-planar coordinated, has a higher affinity for systems offering four ligands, whereas Ni^II prefers G-quadruplexes with six ligands. Likewise, the positioning of ligands in a square-planar versus tetrahedral fashion affects binding affinities of Cu^II and Zn^II cations, respectively. Gaining control over ligand arrangement patterns will spur the rational development of transition-metal-modified DNAzymes. Furthermore, this method is suited to combine different types of ligands, for example, those typically found in metalloenzymes, inside a single DNA architecture.     

Senna occidentalis (L.) Link and Senna hirsuta (L.) H. S. Irwin & Barneby: constituents of fruit essential oils and antimicrobial activity

Senna occidentalis and S. hirsuta are mostly gathered from the wild for medicinal use and have a disagreeable odour when crushed. The volatile oils isolated from fresh fruits of S. occidentalis and S. hirsuta were subjected to gas chromatography (GC), gas chromatography-mass spectrometry (GC-MS) and antimicrobial assays. GC and GC-MS analyses permitted the identification of 58 constituents. S. occidentalis oil was dominated by cyperene (10.8%), β-caryophyllene (10.4%), limonene (8.0%) and caryophyllene oxide (6.8%). The main components of S. hirsuta fruit oil were benzyl benzoate (24.7%), τ-cadinol (18.9%), 2,5-dimethoxy-p-cymene (14.6%) and β-caryophyllene (5.1%). S. occidentalis fruit oil exhibited better antimicrobial activity (MIC 78–312 μg/mL) against Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Aspergillus niger compared with S. hirsuta oil. The compositions and the activities of the fruit essential oils of S. occidentalis and S. hirsuta are reported for the first time.     

Normal forms of dispersive scalar Poisson brackets with two independent variables

We classify the dispersive Poisson brackets with one dependent variable and two independent variables, with leading order of hydrodynamic type, up to Miura transformations. We show that, in contrast to the case of a single independent variable for which a well-known triviality result exists, the Miura equivalence classes are parametrised by an infinite number of constants, which we call numerical invariants of the brackets. We obtain explicit formulas for the first few numerical invariants.