粗糙化银电极上氰基钴胺素的电化学行为

比较研究氰基钴胺素在光滑和粗糙化银电极上的电化学行为，发现在光滑银电极上氰基钴胺素的还原为一个二电子过程，而在粗糙化银电极上则为两个一电子过程，其原因是由于粗糙化银电极对氰根的强吸附作用。     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

铝酸钠和含硅铝酸钠溶液结构和性质的研究

本文通过对铝酸钠和硅铝酸钠溶液的红外光谱、拉曼光谱、粘度、表面张力、丁达尔现象和聚沉等光谱和物理化学性质的研究测定,分析了硅在铝酸钠溶液中的行为.认为硅主要是取代Al-O-Al结构中的Al,形成Al-O-Si结构和Al-O-Si-O-Al-O结构等多种形式硅氧铝键以及由氢键相连的大分子结构.这种结构直接影响其物理化学性质,表现为随硅含量增加表面张力增加,粘度上升,具有丁达尔现象等.说明含硅铝酸钠溶液中存在大分子的胶性基团,属于无机高分子溶液,这种网络状"大分子"结构是硅铝酸钠溶液稳定的原因.     

活性炭自溶液吸附锌(II)离子及其配合物

近年来，有人提出通过表面处理提高活性炭表面电荷，加强对无机离子吸附力等观点，但活性炭对无机离子的吸附活性点，表面含氧基团及配体对吸附的影响等重要问题仍众说纷经[1－4]为此，本文提出用氧化一负离子化法处理活性炭，以表面酸度表征表面含氧基团的量，探讨活性炭对Zn（Ⅱ）及其配合物的吸附特性．1试验（1）试验材料活性发由北京光华木材厂出品，分析纯．过20－30目，BET法测得比表面为1316m2·g-1．在2．5×10－2mlo·dm－3的NaNO3中，测得等电点pHIEP为7．75[5]，元素含量（质量分数）为C（83．9％），N（0．07％），H（1…     

Involvement of human small fragment nuclease in the resistance of human cells to UV-C-induced cell death

Human small fragment nuclease (Sfn) is one of the cellular proteins that were reported to degrade small, single-stranded DNA and RNA. However, the biological role of Sfn in cellular response to various stressors such as UV-C (mainly 254 nm wavelength ultraviolet ray) remains unclear. We have examined whether modulation of human SFN gene expression affects cell survival capacity against UV-C-induced cell death, analyzing colony survival ability in UV-C-sensitive human RSa cells treated with short double-stranded RNA (siRNA) specific for SFN messenger RNA (mRNA). The expression levels of SFN mRNA in the siRNA-treated RSa cells decreased to about 15% compared with those in the control siRNA-treated cells. The siRNA-treated RSa cells showed lower colony survival and higher activity of caspase-3 after UV-C irradiation than the control siRNA-treated RSa cells. Furthermore, the removal capacity of cyclobutane pyrimidine dimers (CPD) in the siRNA-treated RSa cells decreased compared with the control siRNA-treated RSa cells. There was no difference in the colony survival and CPD removal capacity after UV-C irradiation between the control siRNA-treated RSa cells and mock-treated RSa cells. These results suggest that SFN expression is involved in resistance of RSa cells to UV-C-induced cell death through the roles it plays in the DNA repair process.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.