Xe-Kr laser induced collisional ionization system and experimental preparation of its initial state: Four-photon resonant excitation

This paper proposes a novel one-colour Xe-Kr laser induced collisional ionization system. Considering the level scheme of the system, it finds that the initial state of the reaction--the four 4f levels with even J of Xe-can be prepared through method of four-photon resonant excitation by dye laser with wavelength of -440 nm. Absorption of an additional photon （the transfer laser） of the same wavelength will complete the laser induced collisional ionization process. The resonance enhanced ionization spectrum of Xe by four laser photons at -440nm is measured through time-of-flight mass spectrometry, this aims at the preparation of the initial state of the system proposed. The Stark broadening of the measured spectrum is observed and consistent with the previous study. Analysis of the measured resonance ionization spectrum implies the feasibility of -440 nm four-photon resonant excitation of the initial 4f state of the Xe Kr system proposed in this paper, which prepares for a further experiment of laser induced collisional ionization.     

Controlled remote implementation of partially unknown quantum operation

A protocol for controlled remote implementation of a partially unknown operation on an arbitrary quantum state is proposed. In this protocol, a task can be performed using a GHZ state shared among three distant parties: Alice, Bob and the controller Charlie. This protocol is also generalized to the multi-party control system based on sharing an N-qubit GHZ state. Supported by the Natural Science Youth Teacher Foundation of Xuzhou Institute of Technology, China (Grant No. XKY2007317)     

Light intensity distribution of a new type of contact laser scalpel

The emergent light distribution of a new type of contact laser scalpel is measured in three different states using a light sensor. The relationship between the angle and the light intensity is analyzed. The results show that the strongest light is emitted from two sides and the front of the scalpel. The light from the front mainly plays a role of cutting. The light from two sides contributes to stanch the wound so as to remain a clear visual field during the surgery. It also helps to increase the cutting efficiency.     

Asymptotic behaviour of multiperiodic functions scaled by Pisot numbers

Let β > 1 be a Pisot number andg be a positive Hölder continuous function with period one and g(0) = 1. The multiperiodic functionG(ξ)=Π _n=0 ^∞ g(ξ/βⁿ) is studied and the asymptotic behaviour ofI _G(T) = ∫ ₀ ^T G(ξ)dξ investigated. We prove that the limit of logI(T)/ logT exists asT tends to infinity. We also provide a method to calculate this limit for the caseg(ξ) = cos² 2πξ, corresponding to the Fourier transform of the Bernoulli convolution associated to the golden number (or some of its generalizations).     

Theoretical Investigation of Transparent (3–5 μm) and High Reflective (1.3 μm) Filter by Sol-Gel Process

When designing a cut-off interference filter, extra layers are needed to add on each side of periodic symmetrical multilayer to match the incident medium and the substrate. In this paper, we use sol-gel film with adjustable refractive index as the match layer. The influence of the refractive index and thickness of the match layer on the film system is discussed in detail. As an example, a special filter which is transparent (>80%) at the wavelength 3–5 m and high reflective (>90%) at the wavelength 1.3 m is designed. Finally a series of optimized film parameters are presented. The whole design process is a good reference to the other multilayer special filter made by sol-gel process.     

Resonance Rayleigh scattering spectral characteristics of interaction of nucleic acids with some cationic surfactants and their analytical applications

In near neutral medium, the resonance Rayleigh scattering (RRS) intensities of an alone cationic surfactant and nucleic acid are very weak. However, when they combine with each other to form a complex, the RRS intensity of the solution is enhanced greatly. In this paper the reactions of five cationic surfactants with nucleic acids have been studied. The results show that the reaction conditions and RRS spectral characteristics of these reactions are similar, but their sensitivities are obviously different. Among them, the sensitivity of cetyldimethyl benzylammonium chloride (CDBAC) with an aryl and large molecular weight is the highest, while that of cetyl-trimethylammonium bromide (CTAB) without aryl and with small molecular weight is the lowest. The detection limits for ctDNA and yRNA of the former are 6.6 and 29.4 ng · mL-1, while that of the latter are 13.3 and 53.6 ng · mL-1. The method has better selectivity and can be applied to the determination of trace amounts of nucleic acids. Furthermore, i     

Synthesis of cyclosporin A-derived affinity reagents by olefin metathesis

[reaction: see text] New affinity reagents were synthesized using alkene metathesis to directly modify the MeBmt side chain of cyclosporin A. The reagents were used to detect novel cyclophilins from cellular extracts.     

How electron flow controls the thermochemistry of the addition of olefins to nickel dithiolenes: predictions by density functional theory

The reaction of a nickel dithiolene complex (1) and ethylene is a two-step process, in which the trans-product (2) forms first in the direct addition of the olefin to 1, while the more thermodynamically stable cis-product (3) involves isomerization of 2. The introduction of electron-withdrawing groups (cyano or trifluoromethyl) not only significantly lowers the activation energy (TS1) for the formation of trans-product, but it also strongly stabilizes the products (2, 3) such that they are favored by the free energy. However, these substituents leave the barrier for the conformational transformation step (TS2) nearly unchanged. On reduction, the previously favored adduct is now strongly disfavored.     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组，并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差，以确保每段光纤中的最高工作温度是相同的。通过优化，7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ，8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃，8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差，实现了光纤中温度分布的均匀性，并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

全气相化学激光体系的直流放电研究

为了提高化学激光体系(AGIL)中F原子的产率，采用直流放电引发方式，对棒式电极的放电特性进行了研究。在对NF3/He混合气体进行解离时，通过选择不同平衡电阻，得到了3 kW左右的放电注入功率。用光谱分析仪对F原子产率进行了测量。通过拟合计算可得:一个NF3分子能够解离出1.3～1.5个F原子。