荧光探针法研究PEO-PPO嵌段共聚物胶束的特性

利用十六烷基罗丹明Ｂ作为主要荧光探针，研究了水溶性嵌段共聚物Ｐｌｕｒｏｎｉｃ Ｆ－６８在水溶液中的胶束化行为，研究表明，Ｐｌｕｒｏｎｉｃ－Ｆ－６８形成胶束的监界胶束浓度与温度有极大关系，随温度的升高，其ＣＭＣ值急剧下降，并且温度对胶束的性质也有很大，影响温度升高可导致胶束的微观粘度增大，表现出很强的负粘－温效应，并发现引起这种负粘－温效应的主要原因是Ｐｌｕｒｏｎｉｃ Ｆ－６８分子中聚环氧乙烷（ＰＥ     

水相中金属铜表面生成亚铜—邻菲罗啉配合物的反应

本文研究了零价铜在邻菲罗啉水溶液中的反应。当溶液敞露于空气并存在有机阴离子Ｘ－时，例如苯甲酸盐（Ｂｚ）、对甲基苯磺酸盐（Ｔｓ）等，铜的表面生成了致密的反应产物的薄层，经ＩＲ、ＵＶ／ＶＩＳ、ＭＳ和元素分析证明了该薄层为相当纯的亚铜的邻菲罗啉配位化合物，结构为［Ｃｕ（ｐｈｅｎ）２］＋Ｘ－。在乙醇／甲苯混合溶剂中得到了表面反应产物的晶体［Ｃｕ（ｐｈｅｎ）２］（ＣＨ３Ｃ４Ｈ６ＳＯ３）Ｃ２Ｈ５ＯＨ，并用Ｘ－ｒａｙ测得了结构。本工作表明溶液中的ＣｕⅡ离子抑制Ｃｕ０氧化成ＣｕⅠ而影响反应层的形成，同时又促进ＣｕⅠ氧化成ＣｕⅡ的过程     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

褐煤超临界流体抽提产物中脂肪烃组成结构的特征

用硅胶-氧化铝柱色谱预分离和色谱-质谱分析研究了两种褐煤超临界流体抽提物中脂肪烃馏分组成结构特征。结果表明,除主要成份正构烷烃(C_(13)～C_(33))外,尚有少量的类异戊二烯烃(姥鲛烷、植烷等)和萜烷。其中萜烷以五环三萜为主(C_(27)、C_(29)～C_(32)藿烷类化合物),并有一定量的C_(27)、C_(29)和C_(30)藿烯,倍半萜和三环二萜烷含量很少。未检出甾烷。此外,还检出一完整系列的烯烃。试验结果表明,超临界流体抽提条件对褐煤抽出物各组分、含量及其分布有一定的影响。     

富勒烯化聚环氧丙基咔唑的合成与表征

通过Ｆｒｉｅｄｅｌ－Ｃｒｒａｆｔｓ反应制备了富勒烯化的聚环氧丙基咔唑，聚合物中Ｃ６０的含量最高可达７．６ｗｔ％。通过凝胶渗透色谱法测定了聚合物分子量，并采用＾上Ｈ和＾１３Ｃ－ＮＭＲ，ＩＲ，热分析及光谱等手段对其结构进行了分析与表征。     

CO(υ)高振动激发态向C2H2的振动传能研究

用时间分辨富里叶红外发射谱研究了高振动激发态ＣＯ向Ｃ２Ｈ２的传能，得到了ＣＯ（ｖ＝１－３）各振动态布居及其随时间的变化。利用微分法解出弛豫微分方程组，获得ＣＯ（ｖ＝１－３）向Ｃ２Ｈ２的传能速率常数分别为：２．０±０．１，６．０±０．２和９．４±０．８（１０＾－１３ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１·ｓ＾－１）。传能速率随着振动量子数的增加而迅速增加。ＣＯ的振动能应向Ｃ２Ｈ２的对称伸缩模ｖ２近共振Ｖ－     

氟硅烷自组装单分子膜的制备及其摩擦学性能

利用分子自组装技术制备了全氟辛酰胺丙基硅烷单分子膜,用X射线光电子能谱(XPS)对组装膜的表面元素进行了表征;接触角测试表明,该组装膜具有很好的疏水-疏油性,其对水的接触角高达105°,对正十六烷的接触角为50°.摩擦磨损实验结果表明,全氟辛酰胺丙基硅烷自组装单分子膜可以大大降低基片的摩擦系数,使载玻片的摩擦系数从0.85左右降低到0.14左右,而且低负荷下具有很好的耐磨性.     

Determination of Fluoride in Water by Reversed-Phase High-Performance Liquid Chromatography using F−-La3+-Alizarin Complexone Ternary Complex

A method for the determination of fluoride by reversed-phase, high-performance liquid chromatography (RP-HPLC) is described. Fluoride, La³⁺ and alizarin complexone form F-La³⁺-alizarin complexone ternary complex, which is separated from the matrix on a RP, Ultrasphere C₁₈ column (250 × 4.6 mm, 5 μm) using methanol-water (19:81, v/v) mobile phase at 1.00 mL min^?1; detection at 568 nm. The calibration graph was linear from 1.0–150 ng mL^?1 for fluoride with a correlation coefficient: 0.9993 (n=6). The detection limit was 0.2 ng mL^?1. The method was successfully applied to the determination of fluoride in river and tap water. Recovery was: 94–102%, RSD in the range: 1.9 –3.6%.     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

Preparation and Characterization of Sol-Gel SE-30-Coated Silica Stationary Phase for Capillary Liquid Chromatography

A sol-gel chemistry-based polymer coating approach was developed for the preparation of a novel polysiloxane-coated silica stationary phase for capillary liquid chromatography. SE-30, a commercial polysiloxane stationary phase used in gas chromatography, was incorporated into the properly designed sol solution. Then the sol-gel mixture was introduced into a silica gel-packed capillary column by pressure. A thin film of sol-gel SE-30-coating is chemically bonded to the surface of silica gel particles by hydrolytic polycondensation under mild conditions without any free radical cross-linking procedures, therefore the sol-gel approach offers a simple and effective pathway to create a hybrid polymer-coated silica stationary phase. Various factors affecting column making were optimized and discussed in this report. The resulting stationary phase showed good permeability, mechanical robustness, high durability to alkaline mobile phase and satisfactory chromatographic performance in separations of polar and non-polar aromatic compounds. Linear solvation energy relationships (LSERs) studies indicate that the stationary phase has a reversed-phased character with SE-30 providing chromatographic functionality. The solute size and the solute hydrogen bond ability are major factors that principally govern the retention of test solutes.