Double-diffusive convection for a heated cylinder submerged in a salt-stratified fluid layer

Double-diffusive convection due to a cylindrical source submerged in a salt-stratified solution is numerically investigated in this study. For proper simulation of the vortex generated around the cylinder, a computational domain with irregular shape is employed. Flow conditions depend strongly on the thermal Rayleigh number, Ra _T , and the buoyancy ratio, R _ρ. There are two types of onset of instability existing in the flow field. Both types are due to either the interaction of the upward temperature gradient and downward salinity gradient or the interaction of the lateral temperature gradient and downward salinity gradient. The onset of layer instability due to plume convection is due to the former, whereas, the onset of layer instability of layers around the cylinder is due to the latter. Both types can be found in the flow field. The transport mechanism of layers at the top of the basic plume belongs to former while that due to basic plume and layer around the cylinder are the latter. The increase in Ra _T reinforces the plume convection and reduces the layer numbers generated around the cylinder for the same buoyancy ratio. For the same Ra _T , the increase of R _ρ suppresses the plume convection but reinforces the layers generated around the cylinder. The profiles of local Nusselt number reflects the heat transfer characteristics of plume convection and layered structure. The profiles of averaged Nusselt number are between the pure conduction and natural convection modes and the variation is due to the evolution of layers. Received on 13 September 1996     

Time-harmonic response of a vertical crack in plates

A technique for the characterization of an interior crack perpendicular to the surface of the plates is presented. A time-harmonic line load is applied on the upper surface of the plate. The scattered displacement field is calculated by using the strip element method. It is found that there are additional superimposed oscillations in the curve of the absolute values of the displacement in the region between the load and the crack. The mean value of the peaks of the additional oscillations increases with the crack length, and is less dependent on the distance from the load to the crack. The crack position is determined from the displacement distribution curve and the crack length is determined from the mean value of the peaks of the additional oscillations. Approximate polynomial formula of degree four for predicting the length of interior vertical cracks in isotropic homogeneous plates is also proposed. Numerical examples are given to demonstrate the present technique.     

Left versus right canonical Wiener-Hopf factorization and realization

For an arbitrary rational matrix function, not necessarily analytic at infinity, the existence of a right canonical Wiener-Hopf factorization is characterized in terms of a left canonical Wiener-Hopf factorization. Formulas for the factors in a right factorization are given in terms of the formulas for the factors in a given left factorization. All formulas are based on a special representation of a rational matrix function involving a quintet of matrices.     

The reaction pattern of norbornene with excited state carbonyl compounds: Photochemical preparations of norbornene derivatives

We established that acetylacetone and acetone photolytically sensitize norbornene to undergo an efficient radical addition of solvent (ranging from hexane, cyclic ethers, haloalkanes, acetone, alcohols and acetonitrile) across the double bond. In view of its synthetic applicability, sensitized photoreactions of norbornene were reviewed and their mechanisms were compared. Photolysis of acetylacetone in the presence of norbornene in hexane induced i) acetylacetone to cycloadd to norbornene giving the expected 1,5-diketone, and ii) sensitization by triplet excited acetylacetone to generate reactive norbornene, which underwent dimerization as well as the addition of a solvent molecule by radical chain processes. In other solvents, the radical chain addition of solvent dominated the photoreaction, and superseded the cycloaddition, to give excellent to good yields of adducts to norbornene. While the excited species of acetylacetone for the sensitization was deduced to be its spectroscopic triplet excited state, that for the cycloaddition should involve a different one which may be a twisted triplet acetylacetone; sensitization experiments showed that the cycloaddition did not occur from the spectroscopic triplet state. Triplet excited acetone sensitized norbornene to undergo the same solvent addition more efficiently and cleanly than acetylacetone did. In view of various conflicts existing in the proposed energy transfer mechanism, the sensitized norbornene reactions were rationalized with electron transfer and a cation radical chain mechanism.     

A PULSED LASER AND PULSE RADIOLYSIS STUDY OF AMPHIPHILIC CHLOROPHYLL DERIVATIVES WITH PDT ACTIVITY TOWARD MALIGNANT MELANOMA

Two amphiphilic derivatives of chlorophyll, which have high potential as photodynamic therapy sensitizers for malignant melanoma have been investigated by a combination of laser flash photolysis and pulse radiolysis. It is shown that direct excitation of monomeric forms of these molecules in both hydrophilic and hydrophobic environments produces significant yields of the corresponding triplet states, which have been characterized in terms of spectral and kinetic parameters. In both environments, scavenging of the triplets by oxygen produces singlet oxygen, O₂(^lΔ₈), with essentially unit efficiency as evidenced by time-resolved IR luminescence measurements.     

Magnetic resonance imaging of rigid polymers at elevated temperatures with SPRITE

Magnetic resonance imaging has rarely been applied to rigid polymeric materials, due primarily to the strong dipolar coupling and short signal lifetimes inherent in these materials. SPRITE (single point ramped imaging withT ₁ enhancement) (B. J. Balcom, R. P. MacGregor, S. D. Beyea, D. P. Green, R. L. Armstrong, T. W. Bremner: J. Magn. Reson. A123, 131–134, 1996) is particularly well suited to imaging solid materials. With SPRITE, the only requirement is thatT ₂^* be long enough so that the signal can be phase-encoded. The minimum phase encoding time is limited by the maximum gradient strength available and by the instrument deadtime. At present this is usually tens of microseconds and will only improve with refinements in technology. We have used the SPRITE sequence in conjunction with raising the sample temperature to obtain images of rigid polymers that have largely frustrated conventional imaging methods. This approach provides a straightforward and reliable method for imaging a class of samples that, up until now, have been very difficult to image.     

N_2和O_2纯转动拉曼光谱(PRRS)的温度特性

计算了N2 和O2 的PRRS ,讨论了其温度特性。提出通过测量N2 和O2 的PRRS计算大气温度的方法。     

Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Reaction dynamics of synthesis of superheavy elements

Based on the theory of the compound nucleus reaction, a brief review is given on the special aspects of the reaction dynamics in the synthesis of the superheavy elements (SHE), where the fusion probability is the most unknown factor. A new viewpoint of the fusion reaction is proposed that it consists of two processes; the first process up to the contact of two nuclei of the incident channel and the second one of a dynamical evolution to the spherical compound nucleus from the contact configuration. The fusion probability is, thus, given as a product of a contact probability and a formation probability. Analytic studies of the latter probability are discussed in the one-dimensional model, where a simple expression is given to the so-called extra-push energy in terms of the reduced friction, the curvature parameter of the conditional saddle point and the nuclear temperature. Preliminary results of numerical analyses of the contact probability are given, using the surface friction model (SFM). Remarks are given on the present status of our knowledge and for future developments. Received: 1 May 2001 / Accepted: 4 December 2001