Inclusion complexes of cyclodextrins with 4-amino-1,8-naphthalimides (part 2)

Fluorescence spectroscopy was used to characterize inclusion compounds between 4-amino-1,8-naphthalimides (ANI) derivatives and different cyclodextrins (CDs). The ANI derivatives employed were N-(12-aminododecyl)-4-amino-1,8-naphthalimide (mono-C₁₂ANI) and N,N′-(1,12-dodecanediyl)bis-4-amino-1,8-naphthalimide (bis-C₁₂ANI). The CDs used here were α-CD, β-CD, γ-CD, HP-α-CD, HP-β-CD and HP-γ-CD. The presence of CDs resulted in pronounced blue-shifts in the emission spectra of the ANI derivatives, with increases in emission intensity. This behavior was parallel to that observed for the dyes in apolar solvents, indicating that inclusion complexes were formed between the ANI and the CDs. Mono-C₁₂ANI formed inclusion complexes of 1:1 stoichiometry with all the CDs studied. Complexes with the larger CDs (HP-β-CD, HP-γ-CD and γ-CD) were formed by inclusion of the chromophoric ANI ring system, whereas the smaller CDs (α-CD, HP-α-CD and β-CD) formed complexes with mono-C₁₂ANI by inclusion of the dodecyl chain. Bis-C₁₂ANI formed inclusion complexes of 1:2 stoichiometry with HP-β-CD, HP-γ-CD and γ-CD, but did not form inclusion complexes with α-CD, HP-α-CD and β-CD. The data were treated in the case of the large CDs using a Benesi-Hildebrand like equation, giving the following equilibrium constants: mono-C₁₂ANI:HP-β-CD (K ₁₁ = 50 M^?1), mono-C₁₂ANI:HP-γ-CD (K ₁₁ = 180 M^?1), bis-C₁₂ANI:HP-β-CD (K ₁₂ = 146 M^?2), bis-C₁₂ANI:HP-γ-CD (K ₁₂ = 280 M^?2).     

Photoluminescence in Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>-doped silica-titania inverse opal structures

Er³⁺ photoluminescence (PL) and Yb³⁺ → Er³⁺ energy transfer (ET) phenomena in the near infrared (NIR) have been studied in three-dimensional (3-D) inverse opal (IO) structures synthesized by a colloidal/sol–gel route, starting with the deposition of polystyrene microsphere (235 nm and 460 nm diameter) direct opal templates by convective self-assembly, followed by infiltration of the interstices with Er³⁺/Yb³⁺-doped silica, titania and silica-titania sols and heat-removal of the polymeric template material. The crystalline quality of the IOs has been optimized through suitable substrate treatments, plus the control of temperature and humidity during deposition of the templates. The structural and optical properties of the 3-D opal and IO structures have been studied by field emission scanning electron microscopy and visible-NIR reflection spectroscopy, in order to assess the relationship between microstructure and the photonic properties obtained. Photonic bandgaps have been evidenced by the corresponding stop bands in the reflection spectra. The shape and the intensity of the Er^{3+ 4}I_13/2 → ⁴I_15/2 transition at ~1.5 μm were modified in most IOs relatively to similar matrix deposits without a photonic crystal structure, particularly in the case of pure silica and titania IOs, where the PL peak narrowed and intensified. It was not possible at this stage to detect Yb³⁺ → Er³⁺ ET phenomena in the IOs structures.     

Energetic stability of boron nitride nanostructures doped with one carbon atom

We have investigated, using first‐principles calculations, the role of a substitutional carbon atom on the geometric stability of boron nitride monolayers, nanotubes, and nanocones. It is shown that the formation of energy depends on the number of atoms for the monolayers and on the diameter for the tubes. It is also found, for the carbon‐doped boron nitride nanotubes, that the value for the strain energy approaches the one obtained for nondoped tubes with increasing diameter. For the structural stability, we have verified that the doping, which introduces an excess of nitrogen or boron, makes each structure more favorable in its reverse atmosphere, i.e., excess of nitrogen is more stable in a boron‐rich growth environment, whereas excess of boron is preferred in a nitrogen‐rich condition. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Sensitive Determination of Water Insoluble Dyes Used as Marking of Commercial Petroleum Products Using High‐Performance Liquid Chromatography with Electrochemical Detection

This paper describes an analytical method using high‐performance liquid chromatographic (HPLC) separation coupled with electrochemical detection to detect three dyes, Solvent Blue 14 (SB‐14), Solvent Blue 35 (SB‐35) and Solvent Red 24 (SR‐24). The dyes were eluted and separated using a reversed‐phase column (C‐8) under isocratic elution with the mobile phase containing a mixture of acetonitrile/ammonium acetate (5.0 mmol L^?1) at the ratio of 75 : 25 (v/v). Two sample pretreatment methods were tested and successfully applied to quantify SB14, SB‐35 and SR‐24 dyes in gasoline samples. The proposed method was simple, fast and suitable to detect and quantify marker dyes in gasoline sample at low concentration.     

Surface molecular degradation of 3D glass polymer composite under low earth orbit simulated space environment

Epoxy resin reinforced with 3D parabeam glass fibre was subjected to low earth orbit (LEO) simulation conditions comprising ultra high vacuum, temperature cycling (TC), and ultraviolet (UV) radiation and atomic oxygen (AO) bombardment. Inspection of the same composite using only a selection of these hazardous conditions provided comparison measures to identify the effect of each condition on the surface degradation of the resin composite. Each of the individually selected conditions showed a different degradation mechanism that is accelerated by the presence of other conditions. X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and scanning electron microscopy (SEM) were used to provide surface information. The resin composite samples suffered surface oxidation that increased the oxygen content to 17.24% in comparison with the untreated sample (only 14.2%). The samples that were treated with AO showed higher C-O and CO functional groups on the surface in comparison with the rest of the samples (as indicated by XPS). Molecular information (from ToF-SIMS) showed that surface oxidation differs with different conditions and in comparison with the use of all conditions. All treated samples were shown to suffer significant chain scission and loss of volatiles as a result of the LEO conditions. The extent of the chain scission reaction for each condition can be indicated by the extent of the reduction of the relative concentration of the aliphatic hydrocarbon ions. The relative intensity of the C₄H₁₁N₄O₂⁺ ion showed that AO bombardment accelerated the oxidation of the surface. The AO effect is doubled when UV and TC are also present. SEM results indicated that sample surfaces were eroded and roughened upon exposure to LEO conditions. Presence of AO and UV in the LEO conditions introduced white deposits onto the surface, believed to be crosslinked formations.     

Platinum nanoparticle-modified electrodes, morphologic, and electrochemical studies concerning electroactive materials deposition

The present work describes the synthesis of platinum nanoparticles followed by their electrophoretic deposition onto transparent fluorine-doped tin oxide electrodes. The nano-Pt-modified electrodes were characterized by voltammetric studies in acidic solutions showing a great electrocatalytic behavior towards H⁺ reduction being very interesting for fuel cell applications. Morphological characterization was performed by atomic force microscopy on different modified electrodes showing a very rough surface which can be tuned by means of time of deposition. Also, nickel hydroxide thin films were galvanostatically grown onto these electrodes showing an interesting electrochemical behavior as sharper peaks, indicating a faster ionic exchange from the electrolyte to the film.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.     

On the Estimation of the Large Deviations Spectrum

We propose an estimation algorithm for large deviations spectra of measures and functions. The algorithm converges for natural examples of multifractals.     

Non-linear QCD dynamics in two-photon interactions at high energies

Perturbative QCD predicts that the growth of the gluon density at high energies should saturate, forming a Color Glass Condensate (CGC), which is described in mean field approximation by the Balitsky–Kovchegov (BK) equation. In this paper we study the γγ interactions at high energies and estimate the main observables which will be probed at future linear colliders using the color dipole picture. We discuss in detail the dipole–dipole cross section and propose a new relation between this quantity and the dipole scattering amplitude. The total γγ, γ ^? γ ^? cross sections and the real photon structure function $F_{2}^{\gamma }(x,Q^{2})$ are calculated using the recent solution of the BK equation with running coupling constant and the predictions are compared with those obtained using phenomenological models for the dipole–dipole cross section and scattering amplitude. We demonstrate that these models are able to describe the LEP data at high energies, but predict a very different behavior for the observables at higher energies. Therefore we conclude that the study of γγ interactions can be useful to constrain the QCD dynamics.