Gas-phase chemistry of the negative ions of fully-protected peptides by high-resolution electrospray ionization tandem mass spectrometry

Fully-protected C-terminal free peptides can be conveniently analyzed by high-resolution electrospray tandem mass spectrometry (ESI-MS/MS) in a quadrupole quadrupole time-of-flight tandem hybrid mass spectrometer, operated in the negative (-) ionizaionization mode. The unusual choice of negative ions in mass spectrometry applications to peptide analysis was needed to obtain exhaustive sequence and structural data. The low-energy collision-induced dissociation (CID) experiments provided, in fact, tandem mass spectra displaying highly diagnostic fragments with a good signal-to-noise ratio. The method is applied to segments of porcine calcitonin (Cal), Cal (1016, 1), Cal (1724, 2) and Cal (2528, 3) whose [M H]- deprotonated molecular ions provided low-energy CID mass spectra which allow the evaluation either of the primary structure of the peptide and of the location of the side-chain protective groups. ESI (+) MS can be conveniently used, in the high resolution mode, to achieve precise information on the elemental composition of the examined peptides.     

Crystal and molecular structure of a 1:1 complex of a chiral α-d-glucosido-benzo-18-crown-6 and potassium thiocyanate

C₂₈H₃₆O₁₀. KSCN is monoclinic, space groupP2₁ withZ=2,a=10.390(3),b=8.959(7),c=16.377(7) Å, =92.49(5)°. FinalR=0.053 for 1437 reflections measured at room temperature. The K^– ion lies on the least-squares plane formed by the six oxygen atoms in the macrocyclic ring. The SCN^– ion was found on the same face of the macrocycle as the chiral glucopyranoside moiety.Methyl-4,6-O-benzylidene-2,3-O-(1,2-bis(ethoxyethoxy)benzenediyl)--d-glucopyranoside.     

The osmylation of flexible 3-substituted cyclopentenes

The osmylation of several 3-substituted cyclopentenes has been studied. A preference for OsO₄ addition syn to an allylic CHR₂ substituent is observed. By contrast, bulkier substituents of type CMeR₂ give rise to a striking reversal of selectivity. These results are interpreted in terms of the stereodivergent nature of the two differently reactive envelope conformations.     

Synthesis of new pyrazolo[4,3-e]-1,2,4-triazolo[1,5-c]pyrimidines and related heterocycles

The reaction between 5-amino-4-imino-1(2)-substituted-1(2)H-4,5-dihydropyrazolo[3,4-d]pyrimidines and several commercially available reactants afforded new heterocycles with a conserved pyrazolo[3,4-d]pyrimidine nucleus. The key intermediates employed proved to be suitable compounds by virtue of their two vicinal amino and imino groups that were used to obtain five, six and seven-membered rings.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.     

Effects of variable selection on CoMFA coefficient contour maps in a set of triazines inhibiting DHFR

Summary An example of a CoMFA study is described with the aim to discuss one of the major problems of this 3D QSAR method: lack of variable selection. It is shown that the use of nonrelevant energy parameters might produce CoMFA contour maps which poorly reflect the actual nature of the binding site and are in part statistical artefacts. The data set employed in our analysis comparises triazine inhibitors of dihydrofolate reductase (DHFR), isolated from chicken liver, which have already been the object of a QSAR study by other authors. Since three-dimensional structures of triazine-DHFR complexes are known, it was possible not only to reduce ambiguities in the superimposition of the ligands, but also to compare the resulting CoMFA contour maps with the enzyme active site.Supplementary material available: The Cartesian coordinates and the atomic charges of the PM3-optimized structures used in the CoMFA study are available as MOL2 files upon request.To whose memory this paper is dedicated.     

Factors influencing conformer equilibria in retro models of cisplatin-DNA adducts as revealed by moderately dynamic (N,N'-dimethyl-2,3-diaminobutane)PtG(2) retro models (G = a guanine derivative)

Typical cis-PtA(2)G(2) models of key DNA lesions formed by cis-type Pt anticancer drugs are very dynamic and difficult to characterize (A(2) = diamine or two amines; G = guanine derivative). Retro models have A(2) carrier ligands designed to decrease dynamic motion without eliminating any of three possible conformers with bases oriented head-to-tail (two: DeltaHT and LambdaHT) or head-to-head (one: HH). All three were found in NMR studies of eight Me(2)DABPtG(2) retro models (Me(2)DAB = N,N'-dimethyl-2,3-diaminobutane with S,R,R,S and R,S,S,R configurations at the chelate ring N, C, C, and N atoms, respectively; G = 5'-GMP, 3'-GMP, 5'-IMP, and 3'-IMP). The bases cant to the left (L) in (S,R,R,S)-Me(2)DABPtG(2) adducts and to the right (R) in (R,S,S,R)-Me(2)DABPtG(2) adducts. Relative to the case in which the bases are both not canted, canting will move the six-membered rings closer in to each other ("6-in" form) or farther out from each other ("6-out" form). Interligand interactions between ligand components near to Pt (first-first sphere communication = FFC) or far from Pt (second-sphere communication = SSC) influence stability. In typical cases at pH < 8, the "6-in" form is favored, although the larger six-membered rings of the bases are close. In minor "6-out" HT forms, the proximity of the smaller five-membered rings could be sterically favorable. Also, G O6 is closer to the sterically less demanding NH part of the Me(2)DAB ligand, possibly allowing G O6-NH hydrogen bonding. These favorable FFC effects do not fully compensate for possibly stronger FFC dipole effects in the "6-in" form. SSC, phosphate-N1H cis G interactions favor LambdaHT forms in 5'-GMP and 5'-IMP complexes and DeltaHT forms in 3'-GMP and 3'-IMP complexes. When SSC and FFC favor the same HT conformer, it is present at >90% abundance. In six adducts [four (S,R,R,S)-Me(2)DABPtG(2) and (R,S,S,R)-Me(2)DABPtG(2) (G = 3'-GMP and 3'-IMP)], the minor "6-out" HT form at pH approximately 7 becomes the major form at pH approximately 10, where G N1H is deprotonated, because the large distance between the negatively charged N1 atoms minimizes electrostatic repulsion and probably because the G O6-(NH)Me(2)DAB H-bond (FFC) is strengthened by N1H deprotonation. At pH approximately 10, phosphate-negative N1 repulsion is an unfavorable SSC term. This factor disfavors the LambdaHT R form of two (R,S,S,R)-Me(2)DABPtG(2) (G = 5'-GMP and 5'-IMP) adducts to such an extent that the "6-in" DeltaHT R form remains the dominant form even at pH approximately 10.     

Asymmetric Induction at C(β) and C(α) of N-Enoylsultams by Organomagnesium 1,4-Addition/Enolate Trapping

The 1,4-addition of alkylmagnesium chlorides to conjugated N-enoylsultams and subsequent ‘enolate trapping’ with aq. NH₄Cl or MeI/hexamethylphosphoric triamide generated centers of asymmetry at C(β) and/or at C(α) with good to excellent π-face defferentiation as demonstrated by the conversions 1 → 2 , 1 → 4 , and 8 → 9 . This holds also for the regioselective 1,4-addition of EtMgC1 to a dienoylsultam ( 15 → 16 ). Reactive conformations 1 ^≠, 8 ^≠, 13 , and 14 are postulated in agreement with X-ray evidence which also served for the structure determination of the product 9j .     

Structural researches on metal complexes with ligands containing the pyridoxal moiety: X-ray structure of chloro(N-pyridoxylidene-N′-salicyloylhydrazinato) copper(II) Monohydrate

Summary The x-ray crystal structure of the title complex is described Crystals are monoclinic, space groupP2₁/n, with unit-cell dimensions:a=18.070(2),b=13.471(2),c=6.788(2) Å,=94.70(1),Z=4. The structure was solved from diffractometer data by Patterson and Fourier methods and refined by least-squares techniques toR=5.0% for 2451 independent reflections. It consists of complex molecules, in which the copper atom square planar coordination comprises the chlorine atom, Cu-Cl=2.240(3) Å, and the organic ligand which acts as terdentate through the oxygen atom [Cu-O=1.948(3) Å] and a nitrogen atom, [Cu-N=1.933(5) Å] from the hydrazidic chain and the oxygen atom, [Cu-O = 1.894(4) Å] from the pyridoxal group.     

Spectrophotometric determination of noble metals with tin(II) in bromide solutions

In presence of tin(II) bromide, noble metals give coloured products which are suitable for spcctrophotometric determinations. The colours are red (platinum), yellow-orange (rhodium), yellow-brown (palladium), yellow (iridium) and violet (gold) They are extracted, except for gold, with isoamyl alcohol Platinum, rhodium and palladium can be separated from irdium, and rhodium and platinum from palladium. Rhodium and platinum can be determined simultaneously.