Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

Quantum mechanical study of the conformational behavior of proline and 4R-hydroxyproline dipeptide analogues in vacuum and in aqueous solution

The conformational behavior of the title compounds has been investigated by Hartree-Fock, MP2, and DFT computations on the most significant structures related to variations of the backbone dihedral angles, cis/trans isomerism around the peptide bond, and diastereoisomeric puckering of the pyrrolidine ring. In vacuum the reversed gamma turn (gammal), characterized by an intramolecular hydrogen bridge, corresponds to the absolute energy minimum for both puckerings (up and down) of the pyrrolidine ring. An additional energy minimum is found in the helix region, but only for an up puckering of the pyrrolidine ring. When solvent effects are included by means of the polarizable continuum model the conformer observed experimentally in condensed phases becomes the absolute minimum. The down puckering is always favored over its up counterpart, albeit by different amounts (0.4-0.5 kcal/mol for helical structures and about 2 kcal/mol for gammal structures). In helical structures cis arrangements of the peptide bond are only slightly less stable than their trans counterparts. This is no longer true for gammal structures, because the formation of an intramolecular hydrogen bond is possible only for trans peptide bonds. In most cases, proline and hydroxyproline show the same general trends; however, the electronegative 4(R) substituent of hydroxyproline leads to a strong preference for up puckerings irrespective of the backbone conformation.     

Charge heterogeneity of recombinant pro-urokinase and urinary urokinase, as revealed by isoelectric focusing in immobilized pH gradients

When analysing homogeneous preparations of recombinant pro-urokinase and urinary urokinase by isoelectric focusing (IEF) in immobilized pH gradients, an extreme charge heterogeneity was detected (at least ten major and ten minor bands in the pH range 7–10). This extensive polydispersity was not caused by different degrees of glycosylation, or by IEF artefacts, such as binding to carrier ampholytes or carbamylation by urea. A great part of this heterogeneity could be traced back to the existence of a multitude of protein molecules containing Cys residues at different oxidation levels (-SH, -S-S-, even cysteic acid). Owing to the very large number of Cys residues in pro-urokinase (24 out of a total of 411 amino acids) and to the relatively high pI of its native forms (pI 9.5–9.8; the native form is believed to contain all Cys residues as -S-S- bridges), the presence of SH or cysteic acid residues would increase the negative surface charge, as even SH groups would be extensively ionized. In pro-urokinase, part of the heterogeneity was also due to spontaneous degradation to urokinase and possibly also to cleavage into lower-molecular-mass fragments. When all these causes of heterogeneity were removed, the pI spectrum was reduced to only four, about equally intense, bands. The cause of this residual heterogeneity is unknown.     

Methyl and silyl mesolytic dissociations in the radical cations and radical anions of but-1-ene,allylsilane, hexa-1,3-diene,and penta-2,4-dienylsilane. CAS-MCSCF and coupled cluster theoretical study

Methyl or silyl dissociation in the CH(2)=CHCH(2)-XH(3) (a-XH(3)(*)(+)) and CH(2)=CHCH=CHCH(2)-XH(3) (p-XH(3)(*) (+)) radical cations (X = C, Si) yields a(+) or p(+) and XH(3)(*). Similarly, the radical anions a-CH(3)(*) (-) and p-CH(3)(*) (-) give the pi-delocalized anion and CH(3)(*) preferentially. In contrast, a-SiH(3)(*) (-) and p-SiH(3)(*-) prefer to dissociate into the pi-delocalized radical and silide. All reactions are endoergic: by 43-50 kcal mol(-)(1) in the radical cations, and easier to some extent in the radical anions, that require 29-33 (X = C) and 13-14 kcal mol(-)(1) (X = Si). The fragmentation energy profiles do not present significant barriers for the backward process in the case of the radical cations. All radical anions exhibit an energy maximum along the dissociation pathway, but the barrier is lower than the dissociation limit. Fragmentation is "activated" more in the anions than in the cations with respect to homolysis in the corresponding neutrals (that requires 72-81 kcal mol(-)(1)). Wave function analysis indicates that the C-X bond cleavage in the hydrocarbon radical ions, although formally comparable to a homolytic process, is at variance with this model, due to the spin recoupling of one of the two C-X bond electrons with the originally unpaired electron. This is basically true also for the silyl-substituted radical anions, in which the initial more delocalized charge distribution might suggest some heterolytic character of the bond cleavage.     

A DFT study on the 1,3-dipolar cycloaddition reactions of C-(methoxycarbonyl)-N-methyl nitrone with methyl acrylate and vinyl acetate

In the 1,3-dipolar cycloaddition of glyoxylic nitrones with electron-poor and electron-rich alkenes, the configurational instability of the nitrone leads to parallel models when regio- and stereoselectivities are rationalized. The energetics of the cycloaddition reactions have been investigated through molecular orbital calculations at the B3LYP/6-31-G(d) theory level. By studying different reaction channels and reagent conformations, leading to a total of sixteen transition structures for each dipolarophile, the regio- and stereochemical preferences of the reaction are discussed.     

Simple and efficient chemoselective mild deprotection of acetals and ketals using cerium(III) triflate

A new and chemoselective method for the cleavage of alkyl and cyclic acetals and ketals at room temperature in wet nitromethane by using catalytic cerium(III) trifluoromethane sulfonate is presented. The high yields, the observed selectivity, the very gentle reaction conditions, and the almost neutral pH make this procedure particularly attractive for multistep synthesis.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Der mikrochemische Nachweis des Anabasins und seine Unterscheidung von Nikotyrin und Nikotin

Zusammenfassung Das Problem des Nachweises von Anabasin und seiner Unterscheidung von den Alkaloiden Nikotin und Nikotyrin wurde untersucht. In der Goldbromwasserstoffsäure, Platinbromwasserstoffsäure, Wismutbromwasser-stoffsäure und im Cadmiumbromid wurden Reagenzien gefunden, die für den Nachweis und die Unterscheidung dieser Alkaloide sehr gut geeignet sind.Das Verhalten des Nikotins mit zahlreichen Reagenzien wurde eingehend untersucht. Einige der hierbei erhaltenen Verbindungen wurden beschrieben.

---

Summary The problem of detecting anabasin and its differentiation from the alkaloids nicotine and nicotyrine was studied. Auribromhydric acid, bromoplatinic acid, bromobismuthic acid and cadmium bromide were found to be reagents suitable for the detection and differentiation of these alkaloids.An extended study was made of the behavior of nicotine toward numerous reagents. Some of the compounds obtained in this investigation are described.

---

Rèsumè Etude du problème de l'identification de l'anabasine et de sa différenciation des alcaloïdes nicotine et nicotyrine. On a constaté que les acides aurichlorhydrique, platibromhydrique, bismuthobromhydrique, et le bromure de cadmium étaient des réactifs convenant parfaitement à l'identification et la différenciation de ces alcaloïdes. Le comportement de la nicotine en présence de nombreux réactifs a été soigneusement étudié. L'auteur décrit les combinaisons obtenues lors de ces réactions.

     

Induced Absorption of C60 and a Water-Soluble C60-Derivative in SiO2 Sol-Gel Matrices

Porous sol-gel glasses, either impregnated with pure C₆₀ or doped with a methanofullerene derivative, have been studied and induced absorption or reverse saturable absorption (RSA) has been observed in both types of solid materials. The samples impregnated by pure C₆₀ mainly contain well-dispersed fullerene molecules. Unlike crystalline films of C₆₀, their absorption dynamics can be well described by a 5-level model, developed for non-interacting C₆₀-molecules in solutions. Methanofullerene samples, on the other hand, show signs of micellar aggregation and therefore RSA dynamics that are influenced by solid state effects. We observe an important decrease of transmission at high fluences for both kinds of samples, a shortened singlet-state lifetime to that observed in solution, but nonetheless, a triplet yield, that cannot be considered as negligible. In the case of pure C₆₀ in a sol-gel matrix, we can explain the faster de-excitation dynamics, relative to behavior in solution, mainly by the absence of stabilizing aromatic solvents and also by the interaction of the amorphous environment with the molecules. Concerning the methanofullerene samples, the acceleration of the de-excitation dynamics can be principally attributed to solid-state effects due to the micellar aggregation.     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.