Unprecedented reversible migration of amide to schiff base ligands attached to tin: latent single-site initiators for lactide polymerization

In an unprecedented transformation, amide ligands are found to attack the imine carbon centers of tridentate Schiff base ligands attached to tin. The process is reversible, and the resultant (masked) amide species can be exploited as latent single-site initiators for the controlled polymerization of rac-lactide.     

Revised algorithms for the build-up procedure for predicting protein conformations by energy minimization

The build-up procedure for predicting low-energy conformations of polypeptides has been extended to cover the case of peptides in aqueous solutions. The revised procedure consists of five steps to be applied to each stage of the build-up. I. All low-energy minima of each of the two fragments to be joined are combined as starting points for energy minimization of the enlarged fragment, and those minima of the enlarged fragment within a certain upper bound of the lowest energy are retained. II. Whenever one of the combinations in Step I leads to an atomic overlap, the minimization is started again using a pseudoenergy function which remains finite everywhere and becomes equal to the standard energy function when no atoms overlap. III. The minima generated in Steps I and II are culled by ignoring side-chain conformations and retaining only those minima whose backbone conformations differ significantly. IV. The rotameric states of the side chains are optimized, by testing their energy of interaction with the rest of the molecule, and subjecting the whole molecule to a further round of energy minimization if the test indicates that this would reduce the energy. V. The energies of all minima are recomputed with inclusion of a term for solvation and with a smaller upper bound as the criterion for retention. The original build-up procedure consisted of Steps I and III only. Examples are presented showing the effectiveness of the new Steps II and IV in locating low-energy minima, and the problems that remain to be solved, chiefly concerning Step V, are discussed.     

Pyridine and pyrimidine ring syntheses from 4-(4-morpholino)-3-pentenone and from ethyl 3-(4-morpholino)-2-butenoate

3-Substituted 2(1H)-pyridones are produced from reaction of 4-(4-morpholino)-3-pentenone 1 with each of the following carbon acids: cyanoacetamide, malononitrile, cyanothioacetamide, acetylacetamide, benzoyl-acetonitrile. Reaction of ethyl 3-(4-morpholino)-2-butenoate 2 with cyanoacetamide gives the corresponding hydroxypyridone. Pyrimidines are formed by reaction of 1 and of 2 with benzamidine and with S-benzylthio-urea; in the last case, the eliminated morpholine displaces the benzylthio group to give the final product.     

The 1,2,4-triazolyl cation: thermolytic and photolytic studies

The generation of the 1,2,4-triazolyl cation (1) has been attempted by the thermolysis and photolysis of 1-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridinium tetrafluoroborate (2) and the thermolysis of 1- and 4-diazonium-1,2,4-triazoles, using mainly mesitylene as the trapping agent. Thermolysis of 2 gave mostly 1,2,4-triazole, together with 3-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridine, 4-(1,2,4-triazol-4-ylmethyl)-2,6-dimethylpyridine, and 4-(2,4,6-trimethylbenzyl)-2,6-dimethylpyridine. Thermolysis of each of the diazonium salts in the presence of mesitylene again gave mainly triazole together with very low yields of 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene and the corresponding -4-yl isomer in about the same ratio. On the other hand, photolysis of 2 in mesitylene gave mainly 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene. A photoinduced electron transfer from mesitylene to 2 has been observed and preliminary laser flash photolyses of 2 and the corresponding 2,4,6-triphenylpyridinium salt have been carried out. The observed transients are explained as arising from the first excited states of the pyridinium salts rather than from 1. Ab initio MO calculations are reported and indicate that the predicted electronic ground-state of the triazolyl cation is a triplet state of B1 symmetry with five pi electrons, which corresponds to a diradical cation (1c). Possible mechanisms for the formation of the various products are proposed.     

Identification of diethylene glycol monobutyl ether as a source of contamination in an ion trap mass spectrometer

Tandem liquid chromatography-mass spectrometry coupled to online radioactive material detection (LC/RAM/MS/MS) is a technique that is used routinely for in vivo and in vitro drug metabolism studies and allows for a simultaneous correlation between radiochemical peaks and mass spectral data. The compound diethylene glycol monobutyl ether (DGBE), a component of a commercially available scintillation cocktail for RAM analysis, was identified as a source of overwhelming chemical noise in a mass spectrometer which was used in an LC/RAM/MS/MS configuration. In this report, we describe the identification of DGBE as the source of the chemical noise and the methods that were used to minimize the exposure of the mass spectrometer to volatile components of the scintillation cocktail.     

Monomer, dimer, tetramer, polymer: structural diversity in zinc and cadmium complexes of chelate-tethered nucleobases

A series of ZnII and CdII complexes of adenine and guanine derivatives containing a diamine tether have been isolated from aqueous solutions and characterised by single crystal X-ray analysis. These studies reveal a wide range of structural types including monomeric, dimeric, tetrameric and polymeric architectures. The extended structures arise from the ability of the ligands to bridge metal ions using the chelating tether in conjunction with N7 of the nucleobase. Additional metal-nucleobase co-ordination is generally observed at the N3-site of the adenine derivatives. With CdII, ethylenediamine-N9-ethylguanine forms an inverted G-tetrad type structure.     

Bifurcated, modular syntheses of chiral annulet triazacyclononanes

Three chiral 2,6-disubstituted tri-N-methyl azamacrocycles have been prepared by modular methods. These macrocycles were accessed from three chiral 1,4,7-triazaheptanes intermediates that were prepared by two independent routes. The first of these routes involved the benzylamine opening of chiral tosyl aziridines followed by debenzylation but was problematic on solubility grounds. A second, more effective, route was developed which avoided debenzylation by using ammonia in the nucleophilic opening of chiral tosyl aziridines.     

Extraction-spectrophotometric determination of sulphide and sulphite in waters based on formation of the bis(2,9-dimethyl-1,10-phenanthroline) copper(I) ion

A spectrophotometric method is described for the determination of sulphide or sulphite. The bis(2,9-dimethyl-1,10-phenanthroline)copper(II) ion is reduced at pH 10 by sulphide in the presence of formaldehyde and by sulphide and sulphite in its absence. The resulting copper(I) complex is extracted into chloroform and measured. With any convenient sample volume between 1 and 100 ml, the limits of detection are 0.1 mg for sulphide and 0.25 μg for sulphite. The method is unaffected by iron(II) and nitrite, in concentrations of 100 and 1000 mg l^-1, respectively.     

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.     

Bis(imino)phenoxide complexes of aluminium

Reaction of Me(3)Al (one equivalent) with the bis(imino)phenol, [2,6-(ArNCH)(2)-4-MeC(6)H(2)OH] (I)(Ar = 2,6-Pr(i)(2)C(6)H(3)) in toluene at ambient temperature yields the yellow complex [Me(2)Al[2,6-(ArNCH)(2)-4-MeC(6)H(2)O]](1). Interaction of two equivalents of Me(3)Al in refluxing toluene affords the red complex [(Me(2)Al)(2)[2-ArNCH(Me)-6-(ArNCH)-4-MeC(6)H(2)O]](2). Similar interaction (two equivalents, refluxing toluene) of MeAlCl(2) or (i)Bu(3)Al with [2,6-(ArNCH)(2)-4-MeC(6)H(2)OH] affords [ClAl[2,6-(ArNCH)(2)-4-MeC(6)H(2)O](2)](3) or [(i)Bu(2)Al[2,6-(ArNCH)(2)-4-MeC(6)H(2)O]](4), respectively. Hydrolysis of 2 readily affords the iminoaminophenol ligand [2-(ArN=CH)-6-ArNHCH(Me)-4-MeC(6)H(2)OH](II), which reacts further with Me(3)Al to afford [Me(2)Al[2-ArNCH(Me)-6-(ArNCH)-4-MeC(6)H(2)O]](5). An X-ray study on reveals bidentate imino-alkoxide ligation about the distorted aluminium centre, whereas is a binuclear structure with tetrahedral aluminiums ligated by imino-alkoxide and amido-alkoxide ligand fragments, respectively. For and bidentate imino-alkoxide ligation is observed.