Passive sampling and/or extraction techniques in environmental analysis: a review

The current state-of-the-art of passive sampling and/or extraction methods for long-term monitoring of pollutants in different environmental compartments is discussed in this review. Passive dosimeters that have been successfully used to monitor organic and inorganic contaminants in air, water, sediments, and soil are presented. The application of new approaches to the determination of pollutants at the sampling stage is discussed. The main milestones in the development of passive techniques for sampling and/or extraction of analytes, and in biomonitors used in environmental analysis, are summarized in this review. Passive samplers and biomonitors are compared.     

Synthesis and Single Crystal Structure of a New Dinuclear Copper(II) Complex of 1,5-Bis(8-oxaquinoline)-3-methylpentane

A new flexible ligand, 1,5-bis(8-oxaquinoline)-3-methylpentane (C5MeOQ), was synthesized and used in the preparation of the new dinuclear copper(II) complex 1: [Cu₂(μ-OMe)₂(μ-C5MeOQ)(NO₃)₂]. Single crystal X-ray analysis revealed that complex 1 contains dinuclear Cu(II) units with bridging methoxo groups. The ligand, C5MeOQ, takes on a bent conformation in order to connect to and complete the square planar coordination environment of both copper centers; and one of the two Cu(II) centers adopts a distorted square planar configuration as a result of the ligand conformation. The magnetic properties of complex 1 were investigated by variable-temperature magnetic susceptibility measurements in the 100–300 K range. Interestingly, the susceptibility data for complex 1 reveals that the compound is diamagnetic, suggesting the presence of very strong antiferromagnetic coupling interactions between the adjacent Cu(II) centers.     

Study on the interaction of platinum(IV), gold(III) and silver(I) ions with DNA

Fluorescence, absorption spectra have been produced by the interaction of platinum(IV), silver(I) and gold(III) ions with the berberine–DNA system (berberine, Scheme 1). Platinum(IV) and gold(III) ions show different effects from that of silver(I) ion on the spectral characteristics of the berberine–DNA system. Quenching fluorescence is seen with platinum(IV) and gold(III) ions addition, whereas increasing fluorescence is observed for silver(I) ions. The addition of gold(III) and silver(I) ions cause an increase in absorption of the berberine–DNA system. The above results suggest that different metal ions exhibit different affinities when binding to DNA correlates well with the ions’ charge, structure and the coordination ability.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Study of donepezil binding to serum albumin by capillary electrophoresis and circular dichroism

The interaction between human serum albumin (HSA) and the acetylcholinesterase inhibitor donepezil, has been studied by means of capillary electrophoresis frontal analysis (CE/FA) and circular dichroism. CE/FA enabled rapid and direct estimation of the quantity of free donepezil present at equilibrium with a physiological level of serum albumin (600 mol L^–1). Application of Scatchard analysis enabled estimation of the binding parameters of HSA towards donepezil, such as association constant and number of binding sites on one protein molecule. Furthermore, due to enantioseparation ability shown by HSA on donepezil in CE mode, displacement experiments were carried out using ketoprofen and warfarin as coadditives to the HSA based running buffer. The addition of these compounds reduced the enantioresolution of donepezil by HSA only when used at high concentration. These data were confirmed and corroborated by circular dichroism (CD) experiments. Using CD, bilirubin was also applied as a ligand specific to site III of HSA. The observed behaviour suggested that donepezil could be considered a ligand with independent binding to sites I and II; although site III is not the highest affinity site, indirect interaction (i.e. cooperative binding) can be assumed.     

Sodium Borohydride – Ammonium Carbonate: An Effective Reducing System for Aldehydes and Ketones

Summary. Reduction of aldehydes and ketones to the corresponding alcohols was achieved in a simple procedure using the system sodium borohydride and ammonium carbonate. This system needs lower excesses of reducing agent and leads to significantly shortened reaction times.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

Coordination compounds of nickel with trithiocyanuric acid. Part IV. Structure of [Ni(pmdien)(ttcH)] (pmdien = N,N,N′,N′,N′′-pentamethyldiethylenetriamine,ttcH3 = trithiocyanuric acid)

Ni^II mixed-ligand complexes of compositions [Ni(pmdien)(ttcH)] (1), [Ni(baphen)₂(ttcH)] · 4H₂O (2), [Ni-(dpa)(ttcH)(H₂O)] (3), [Ni(cyclam)(ttcH)] · 2H₂O (4), [Ni(hexaa)](ttcH) (5) and [Ni(hexab)(ttcH)] · 2H₂O (6), (baphen = 4,7-diphenyl-1,10-phenanthroline, dpa = 2,2-dipyridylamine, cyclam = 1,4,8,11-tetraazacyclotetradecane, hexaa = 1,3,6,9,11,14-hexaazatricyclo[12.2.1.1^6,9]-octadecane, hexab = 1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane) have been prepared and characterized by means of i.r., u.v.–vis. spectroscopies and magnetochemical measurements. The redox properties of the complexes were studied by cyclic voltammetry. The crystal and molecular structure of [Ni(pmdien)(ttcH)] was determined. The nickel atom is penta-coordinated by three N atoms of pmdien, and by S and N atoms of trithiocyanurate(2–) anion.     

A method for calculating <Superscript>16</Superscript>o/<Superscript>18</Superscript>o peptide ion ratios for the relative quantification of proteomes

A method is described for the identification and relative quantification of proteomes using accurate mass tags (AMT) generated by nLC-dual ESI-FT-ICR-MS on a 7T instrument in conjunction with stable isotope labeling using 16O/18O ratios. AMTs were used for putative peptide identification, followed by confirmation of peptide identity by tandem mass spectrometry. For a combined set of 58 tryptic peptides from bovine serum albumin (BSA) and human transferrin, a mean mass measurement accuracy of 1.9 ppm +/-0.94 ppm (CIM99%) was obtained. This subset of tryptic peptides was used to measure 16O/18O ratios of 0.36 +/- 0.09 (CIM99%) for BSA (micro = 0.33) and 1.48 +/- 0.47 (CIM99%) for transferrin (micro = 1.0) using a method for calculating 16O/18O ratios from overlapping isotopic multiplets arising from mixtures of 16O, 18O1, and 18O2 labeled C-termini. The model amino acid averagine was used to calculate a representative molecular formula for estimating and subtracting the contributions of naturally occurring isotopes solely as a function of peptide molecular weight. The method was tested against simulated composite 16O/18O spectra where peptide molecular weight, 16O/18O ratio, 18O1/18O2 ratios, and number of sulfur atoms were varied. Relative errors of 20% or less were incurred when the 16O/18O ratios were less than three, even for peptides where the number of sulfur atoms was over- or under-estimated. These data demonstrate that for biomarker discovery, it is advantageous to label the proteome representing the disease state with 18O; and the method is not sensitive to variations in 18O1/18O2 ratio. This approach allows a comprehensive differentiation of expression levels and tentative identification via AMTs, followed by targeted analysis of over- and under-expressed peptides using tandem mass spectrometry, for applications such as the discovery of disease biomarkers.