Retention mechanism divergence of a mixed mode stationary phase for high performance liquid chromatography

Mixed mode stationary phases utilize secondary retention mechanisms to add a dimensionality to the surface of high performance liquid chromatography (HPLC) adsorbents. This approach was used by several authors to improve the separation performance of single dimension separations. We explored the magnitude of these secondary interactions by performing an off-line two-dimensional (2D)-HPLC separation with a Scherzo SM-C18 column of a β-lactoglobulin tryptic digest with a mobile phase pH of 7 in the first dimension and 2 in the second. Mechanism divergence was determined using the peak capacity and a geometric approach to factor analysis, to measure the correlation. This separation was repeated with a C18 stationary phase as a control. It was found that the C18 column had a correlation coefficient of 0.784, smaller than the mixed mode column, 0.884. This indicated that the retention mechanisms of the C18 column were more divergent under these two pH environments than the mixed mode column. However, the SM-C18 still provided alternative selectivity of the peptides to that of the C18 and could be considered as a good alternative for further 2D-HPLC separations.     

Shell particles, trials, tribulations and triumphs

The concept of pellicular particles was imagined by Horváth and Lipsky fifty years ago. They were initially intended for the analysis of macromolecules. Later, shell particles were prepared. The rational behind this concept was to improve column efficiency by shortening the pathways that analyte molecules must travel and, so doing, to improve their mass transfer kinetics. Several brands of superficially porous particles were developed and became popular in the 1970s. However, the major improvements in the manufacturing of high-quality, fully porous particles, that took place in the same time, particularly by making them finer and more homogeneous, hampered the success of shell particles, which eventually disappeared. Recently, the pressing needs to improve analytical throughputs forced particle manufacturers to find a better compromise between the demands for higher column efficiency that require short diffusion paths of analyte molecules in columns and the need for columns that can be operated with the conventional instruments for liquid chromatography, which operate with moderate column back-pressures. This lead to the apparition of a new generation of columns packed with shell particles, which bring chromatographic columns to a level of efficiency undreamed of a few years ago. This evolution is reviewed, the reason that motivated it, and the consequences of their success are discussed.     

Kinetic investigation of narrow-bore columns packed with prototype sub-2 μm superficially porous particles with various shell thickness

The recent successful breakthrough of sub-3 μm shell particles in HPLC has triggered considerable research efforts toward the design of new brands of core-shell particles. We investigated the mass transfer mechanism of a few analytes in narrow-bore columns packed with prototype 1.7 μm shell particles, made of 1.0, 1.2, and 1.4 μm solid nonporous cores surrounded by porous shells 350, 250, and 150 nm thick, respectively. Three probe solutes, uracil, naphthalene, and insulin, were chosen to assess the kinetic performance of these columns. Inverse size exclusion chromatography, peak parking experiments, and the numerical integration of the experimental peak profiles were carried out in order to measure the external, internal, and total column porosities, the true bulk diffusion coefficients of these analytes, the height equivalent to a theoretical plate, the longitudinal diffusion term, and the trans-particle mass transfer resistance term. The residual eddy diffusion term was measured by difference. The results show the existence of important trans-column velocity biases (7%) possibly due to the presence of particle multiplets in the slurry mixture used during the packing process. Our results illustrates some of the difficulties encountered by scientists preparing and packing shell particles into narrow-bore columns.     

Accurate measurements of peak variances: importance of this accuracy in the determination of the true corrected plate heights of chromatographic columns

The true efficiency of a column is derived from the differences between the variances of the peak profiles of the same compound recorded in the presence and the absence of the chromatographic column. These variances are usually derived using one of three methods: (1) the retention time of the peak apex and its half-height width; (2) the moments of the best fit between the experimental data and a hybrid response function, e.g., an exponentially convoluted Gaussian; or (3) the exact moments of the experimental band profiles. Comparisons of the results of these methods show that the first method is always inaccurate because all the band profiles recorded are strongly tailing. The peak fit method is accurate only for 4.6mm I.D. columns operated with instruments having low extra-column volume but fails for short narrow-bore columns due to the severe tailing of peaks passing through the complex channels of the extra-column volumes and to the inaccuracies in the fit of experimental data to the selected function. Although far better, the moment method may be inaccurate when the zero dead volume union used to measure the extra-column peak variances has a higher permeability than the column, causing the upstream part of the instrument to operate under comparatively low pressures.     

The influence of the memory effect on preparative separations using the amylose tris(3,5-dimethylphenylcarbamate) stationary phase

Acid/base mobile phase modifiers affect enantioseparations in ways that are not yet understood for the lack of systematic studies, which makes the scale-up of preparative separations difficult to predict. Shifts of the selectivity of certain pairs of enantiomers upon exposure of the column to these modifiers is amply documented. Furthermore, once the modifier has been removed from the mobile phase, the improved selectivity remains, this phenomenon has been named the memory effect. We selected four enantiomeric pairs for a systematic study of this memory effect. The selectivity of 4-chlorophenylalanine ethyl ester (4CPEE) improves after a solution of ethanesulfonic acid (ESA) is percolated through the column. The selectivity of propranolol HCl and Tröger's base increases after a solution of diiospropylethylamine is percolated through the column. The selectivity of these three pairs of enantiomers is inversely affected by percolation of the opposite acid/base solution. Each of these four compounds reached an equilibrium concentration that maintained the separation of the enantiomeric pairs. In contrast, the selectivity of trans-stilbene oxide (TSO) is not affected by either acid/base modifier. Preparative separations can be used to detect changes in the active surface of the chiral polymer stationary phase by measuring the change in selectivity and resolution when modifiers are used. Preparative method development was carried out on analytical columns and scale-up to 1 cm ID columns were performed in this study.     

Water versus acetonitrile coordination to uranyl. Density functional study of cooperative polarization effects in solution

Optimizations at the BLYP and B3LYP levels are reported for mixed uranyl-water/acetonitrile complexes [UO(2)(H(2)O)(5-n)(MeCN)(n)](2+) (n = 0-5), in both the gas phase and a polarizable continuum modeling acetonitrile. Car-Parrinello molecular dynamics (CPMD) simulations have been performed for these complexes in the gas phase, and for selected species (n = 0, 1, 3, 5) in a periodic box of liquid acetonitrile. According to structural and energetic data, uranyl has a higher affinity for acetonitrile than for water in the gas phase, in keeping with the higher dipole moment and polarizability of acetonitrile. In acetonitrile solution, however, water is the better ligand because of specific solvation effects. Analysis of the dipole moment of the coordinated water molecule in [UO(2)(H(2)O)(MeCN)(4)](2+) reveals that the interaction with the second-shell solvent molecules (through fairly strong and persistent O-H···N hydrogen bonds) causes a significant increase of this dipole moment (by more than 1 D). This cooperative polarization of water reinforces the uranyl-water bond as well as the water solvation via strengthened (UO(2))OH(2)···NCMe hydrogen bonds. Such cooperativity is essentially absent in the acetonitrile ligands that make much weaker (UO(2))NCMe···NCMe hydrogen bonds. Beyond the uranyl case, this study points to the importance of cooperative polarization effects to enhance the M(n+) ion affinity for water in condensed phases involving M(n+)-OH(2)···A fragments, where A is a H-bond proton acceptor and M(n+) is a hard cation.     

Direct functionalisation of group 10 N-heterocyclic carbene complexes for diversity enhancement

The synthesis of alkyne-substituted N-heterocyclic carbene complexes of Pd(II) and Pt(II) is reported. Catalyzed 1,3-dipolar cycloaddition with azides has been applied as a modular way of functionalisation of group 10 transition metal NHC complexes to generate potentially new metallodrugs.     

Determination of A 0 for CH3F from ground-state combination differences

The direct determination of the ground-state rotational constants A ₀ and D ₀ ^K of methyl fluoride has been accomplished through ground-state combination differences including perturbation-allowed transitions. The values found are A ₀ = 5·182009 ± 0·000012 and D ₀ ^K = (70·33 ± 0·25) × 10^-6 cm^-1. The ‘ normal ’ GSCD have also been used, in conjunction with microwave transitions, to yield improved values for the other rotational constants, including values for H ₀ ^{J K} and H ₀ ^KJ .     

BaSnF4 fast ion conductor: Variations versus the method of preparation and anomalous temperature variation of the quadrupole splitting

A new method of preparation of high performance fluoride ion conductor, BaSnF₄, by water leaching of newly discovered barium tin(II) chloride fluorides, has been designed, and the materials have been studied and compared to the solid prepared by the usual dry method. The unit-cell parameters and crystallite dimensions were found to vary with the method of preparation. In addition, the crystallite dimensions were found to be highly anisotropic for the samples obtained by the wet method. The Mössbauer spectrum is made of a large tin(II) quadrupole doublet, and a broad tin(IV) oxide peak due to surface oxidation. The tin(II) spectrum is in agreement with covalently bonded tin(II) having a strongly stereoactive lone pair. An unusually high dependence of the quadrupole splitting at low temperatures was observed (5.8 times larger than for α-SnF₂).     

Quantization of Poisson-Lie groups and applications

LetG be a connected Poisson-Lie group. We discuss aspects of the question of Drinfel'd:can G be quantized? and give some answers. WhenG is semisimple (a case where the answer isyes), we introduce quantizable Poisson subalgebras ofC ^∞(G), related to harmonic analysis onG; they are a generalization of F.R.T. models of quantum groups, and provide new examples of quantized Poisson algebras.