无线/水声通信浮标技术研究及其实现

本文研究并设计实现了一种用于浅海水声信道多速率通信的无线/水声通信(racom)浮标,介绍了其水声通信和无线通信技术方案和工程设计与实现。本文设计的浮标综合了水声通信、DSP信号处理和无线电通信等技术,也可以用作水声通信/传感网络中的无线/水声通信(racom)网关节点。海上试验验证了本浮标总体设计方案的可行性。海上试验中,浮标无线通信距离达到15.2 km,误码率不大于10 6;除2 kbps速率外,浮标各种速率的水声通信数据传输误码率都小于1%,最大通信作用距离达到9.6 km;同时,试验也验证了浮标与水下运动平台之间的通信功能。     

衬底温度对反应磁控溅射W掺杂ZnO薄膜的微观结构及光电性能的影响

采用直流脉冲反应磁控溅射方法生长W掺杂ZnO（WZO）透明导电氧化物薄膜并研究了衬底温度对薄膜微观结构、组分、表面形貌以及光电性能的影响.实验结果表明,WZO薄膜具有良好的（002）晶面择优取向,且适当的衬底温度是制备优质WZO薄膜的关键因素.随着衬底温度升高,薄膜表面粗糙度先增大后减小;衬底温度较高时,薄膜的结构致密,结晶质量好,电子迁移率高.当衬底温度为325℃时,WZO薄膜获得最低电阻率9.25×10^-3Ω·cm,方块电阻为56.24Ω/□,迁移率为11.8 cm² V^-1·s^-1,其在可见光及近红外区域（400—1500 nm）范围的平均透过率达到85.7%.     

Statistical property of dynamic speckles produced by a rotating cylinder object

高斯光束照射以固定角速度旋转的粗糙圆柱体表面,反射空间形成随着被测表面运动变化的动态散斑.研究了照射面积大于圆柱曲面条件下在远场衍射区形成的动态散斑统计特性,得到了不同入射条件及不同圆柱时动态散斑强度起伏空间-时间归一化相关函数.结果表明:随着圆柱半径、旋转速度以及照射光斑有效面积的增大,动态散斑强度起伏相关性快速减小;当圆柱旋转速度恒定,动态散斑光强起伏相关函数的峰值随着探测点之间距离的增大而减小,但峰值的位置随之而增大;在近似点照射情况下随着圆柱半径的增大空间相关长度基本不变,而相关时间性明显增大.     

均苯三酚改性三聚氰胺-甲醛气凝胶的制备与表征

以三聚氰胺、均苯三酚和甲醛为原料,经过溶胶凝胶、CO2超临界干燥,制备出由均苯三酚改性的最低密度为44 mg/cm3、透明、不易开裂的三聚氰胺-甲醛（MF）气凝胶,利用Materials-Studio软件模拟,结果证明了均苯三酚的引入可以缩短凝胶时间。并采用扫描电镜（SEM）, 红外（FT-IR）, 热重（TGA）对样品进行了表征,测试表明:改性后的MF气凝胶具有由直径30 nm的骨架构成三位连续空间网络结构,孔径约为100 nm,且分布均匀,热性能也有所提高。     

Forces of rails for electromagnetic railguns

In this paper, using electromagnetic theory, the equations for the total magnetic force on the rails are deduced. Besides this, the equations for the changes of the magnetic force along with time and the running position of the armature under jointed pulse operating current are presented. Then, the equations for changes of the bending stress and shear stress in the rail along with time and the running position of the armature are given. Changes of the magnetic force distribution between the two rails along with the running position of the armature and other parameters are investigated. The total electromagnetic forces on the rail under jointed pulse operating current are analyzed. Distribution and changes of the bending stresses in the rail are studied. A number of results are obtained. The results are useful for design and application of the railgun system.     

A discrete dynamic convexized method for the max-cut problem

The max-cut problem is a classical NP-hard problem in graph theory. In this paper, we adopt a local search method, called MCFM, which is a simple modification of the Fiduccia-Mattheyses heuristic method in Fiduccia and Mattheyses (Proc. ACM/IEEE DAC, pp. 175?C181, 1982) for the circuit partitioning problem in very large scale integration of circuits and systems. The method uses much less computational cost than general local search methods. Then, an auxiliary function is presented which has the same global maximizers as the max-cut problem. We show that maximization of the function using MCFM can escape successfully from previously converged discrete local maximizers by taking increasing values of a parameter. An algorithm is proposed for the max-cut problem, by maximizing the auxiliary function using MCFM from random initial solutions. Computational experiments were conducted on three sets of standard test instances from the literature. Experimental results show that the proposed algorithm is effective for the three sets of standard test instances.     

Spin-parity analysis of pp¯ mass threshold structure in J/ψ and ψ(3686) radiative decays

A partial wave analysis of the ppˉ mass-threshold enhancement in the reaction J/ψ→γppˉ is used to determine its J(PC) quantum numbers to be 0(-+), its peak mass to be below threshold at M=1832(-5)(+19)(stat)(-17)(+18)(syst)±19(model) MeV/c(2), and its total width to be Γ<76 MeV/c(2) at the 90% C.L. The product of branching ratios is measured to be BR[J/ψ→γX(ppˉ)]BR[X(ppˉ)→ppˉ]=[9.0(-1.1)(+0.4)(stat)(-5.0)(+1.5)(syst)±2.3(model)]×10(-5). A similar analysis performed on ψ(3686)→γppˉ decays shows, for the first time, the presence of a corresponding enhancement with a production rate relative to that for J/ψ decays of R=[5.08(-0.45)(+0.71)(stat)(-3.58)(+0.67)(syst)±0.12(model)]%.     

First observation of η(1405) decays into f(0)(980)π0

The decays J/ψ → γ π+ π- π0 and J/ψ → γ π0 π0 π0 are analyzed using a sample of 225×10(6) J/ψ events collected with the BESIII detector. The decay of η(1405) → f(0)(980)π0 with a large isospin violation is observed for the first time. The width of the f(0)(980) observed in the dipion mass spectra is anomalously narrower than the world average. Decay rates for three-pion decays of the η' are also measured precisely.     

南方某县乡镇饮用水中挥发性有机物的检测及风险评价

在南方某癌症高发县5个乡镇10个村进行布点取样,采集深层地下水与浅层地下水共计20个水样。采用吹扫捕集与气相色谱-质谱联用方法测定水样中13种挥发性有机物(VOCs),检出二氯甲烷、三氯甲烷、苯和四氯化碳4种VOCs,其浓度分别为0.36—13.52、0.41—18.71、0.57—11.75μg/L和1.56—214.62μg/L。1个水样中苯和16个水样中四氯化碳超过GB 5749-2006规定的限值。采用优化的USEPA风险评价模型,对VOCs进行人体健康风险评价,其非致癌风险指数0.0073—0.7100,致癌风险水平1.98×10-6—1.99×10-4,全部水样的致癌风险水平超过10-6水质监控值,1个水样的致癌风险水平超过10-4的可接受水平。四氯化碳对非致癌风险指数和致癌风险水平贡献最大。     

High power 4.65 μm single-wavelength laser by second-harmonic generation of pulsed TEA CO2 laser in AgGaSe2 and ZnGeP2

A high power 4.65 ??m single-wavelength laser by second-harmonic generation (SHG) of TEA CO₂ laser pulses in silver gallium selenide (AgGaSe₂) and zinc germanium phosphide (ZnGeP₂) crystals is reported. Experimental results show that the average output power of SHG laser is not only restricted by the damage threshold of the nonlinear crystals, but also limited by the irradiated power of fundamental-wave laser depending on the operating repetition-rate. It is found that ZnGeP₂ can withstand higher 9.3 ??m laser irradiation intensity than AgGaSe₂. As a result, using a parallel array stacked by seven ZnGeP₂ crystals, an average power of 20.3 W 4.65 ??m laser is obtained at 250 Hz. To the best of our knowledge, it is the highest output power for SHG of CO₂ laser by far.