Synthesis of Jasminaldehyde by Solid-Liquid Phase Transfer Catalysis Without Solvent,Under Microwave Irradiation

α-n-amylcinnamaldehyde (jasminaldehyde) was obtained with 82 % yield by solid-liquid phase transfer catalysis without solvent within 3 days at room temperature. By use of domestic microwave irradiation, the same yield was obtained within 1 minute at a power of 600 W.     

Synthesis and study of N,N‐disubstituted 4‐[(4‐aminophenyl)diazenyl]benzylidene‐4′‐alkylanilines

A series of N,N‐disubstituted‐4‐[(4‐aminophenyl)diazenyl]benzylidene‐4′‐alkylanilines (azo dyes) were synthesized from the reaction of the corresponding benzaldehyde with alkylanilines. These azo dyes exhibit nematic and SmC phases on heating. Their order parameter, photo‐stability and miscibility were studied by investigation of a representative sample.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Possible acceleration of cosmic rays in a rotating system: Uehling-Uhlenbeck model

We illustrate the possible acceleration of cosmic rays passing through a kind of amplification channel (via diffusion modes of propagating plane-wave fronts) induced by a rotating system. Our analysis is mainly based on the quantum discrete kinetic model (considering a discrete Uehling-Uhlenbeck collision term), which has been used to study the propagation of plane (e.g., acoustic) waves in a system of rotating gases.     

Stability analysis of a rotor–bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force

Previous investigations have indicated that the finite number of balls can cause the bearing stiffness to vary periodically. However, effects of unbalanced force in a rotor–bearing system on the bearing stiffness have not received sufficient attention. The present work reveals that the unbalanced force can also make the bearing stiffness vary periodically. The parametric excitations from the time-varying bearing stiffness can cause instability and severe vibration under certain operating conditions. Therefore, the determination of the operating conditions of parametric instability is crucial to the design of high speed rotating machinery. In this paper, an extended Jones–Harris stiffness model is presented to ascertain the stiffness of the angular contact ball bearing considering five degrees of freedom. Stability analysis of a rigid rotor–bearing system is performed utilizing the discrete state transition matrix (DSTM) method. The effects of unbalanced force, bearing loads and damping on the instability regions are discussed thoroughly. Investigations mainly show that the time-varying bearing stiffness fluctuates sinusoidally due to finite number of balls and unbalanced force. The locations and widths of the instability regions caused by these two parametric excitations differ distinctly. Unbalanced force could change the widths of the instability regions, but without altering their central positions. The axial and radial loads of the bearing only change the positions of the instability regions, without affecting their widths. Besides, damping can reduce the widths of the instability regions.     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A one‐pot method for synthesis of reduced graphene oxide‐supported Cu–Cu2O and catalytic application in tandem reaction of halides and sodium azide with terminal alkynes

Reduced graphene oxide (RGO)‐supported Cu–Cu₂O nanocomposite material (Cu‐Cu₂O@RGO) was prepared through a one‐pot reflux synthesis method. The morphology, crystal structure and composition of the prepared Cu‐Cu₂O@RGO were characterized using transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron, infrared and Raman spectroscopies. Cu‐Cu₂O@RGO as a heterogeneous catalyst was applied to tandem reactions of halides and sodium azide with terminal alkynes to synthesize effectively 1,4‐disubstituted 1,2,3‐triazoles. Moreover, the catalyst showed excellent recyclability performance with very little leaching of the metal. Compared with homogeneous catalysts, Cu‐Cu₂O@RGO as a green and efficient catalyst was recoverable, easy to separate and highly stable in the tandem method for the synthesis of 1,2,3‐triazole compounds.     

Superstructure in chemically etched poly(ethylene terephthalate)

The new technique of contact etching has been utilized to study the bulk morphology of polyethylene terephthalate by the echant, n-propylamine. A variety of films and fibers with different mechanical and thermal histories have been subjected to contact etching. The sample surfaces have been studied principally by scanning electron microscopy. A network superstructure with its characteristic dimension (thickness) of from 700 to 3000 Å, depending on sample history, has been observed. In the oriented samples the network superstructure aligns perpendicular to the direction of sample orientation. A simple model is proposed to describe the network superstructure which is believed to be moderately crystalline.     

Infrared and Raman investigation of the charge–density-wave state in rare-earth tri-telluride compounds

We summarize our recent efforts in investigating the charge–density-wave (CDW) state of the rare-earth tri-tellurides RTe₃ by means of infrared and Raman techniques. We identify the CDW gap, as order parameter of the broken-symmetry ground state, as well as the collective mode of the CDW condensate.