Biological Impact of Shorter Wavelength Ultraviolet Radiation-C†

Life on earth has constantly coped with the impact of solar radiation, especially solar ultraviolet radiation (solar UV). Various biological mechanisms protect us from solar UV. New devices emitting shorter wavelengths UV-C, i.e. <254 nm emitted by conventional UV germicidal lamps, have emerged. These shorter wavelength UV-C emitting devices are useful for various purposes, including microorganism inactivation. However, as solar UV-C does not reach the earth surface, biological impacts of UV-C has been studied using 254 nm germicidal lamps, and those using shorter wavelength UV-C is rarely known. To balance the utility and risk of UV-C, the biological effect of these new UV-C emitting devices must be investigated. In addition, our knowledge of biological impacts of the wavelength-dependent entire UV (100–400 nm) must be enhanced. In this review, we briefly summarize the biological impacts of shorter wavelength UV-C. Mechanisms of UV-C-induced cellular damage and factors affecting the microorganism inactivation efficiency of UV-C have been discussed. In addition, we theoretically estimate the probable photocarcinogenic action spectrum of shorter wavelength UV-C. We propose that increasing the knowledge on UV-C will facilitate the adoption of shorter wavelength UV-C emitting new devices in an optimal and appropriate manner.     

Control of aqueous droplets using magnetic and electrostatic forces

Basic control operations were successfully performed on an aqueous droplet using both magnetic and electrostatic forces. In our droplet-based microfluidics, magnetic beads were incorporated in an aqueous droplet as a force mediator. This report describes droplet anchoring and separation of the beads from the droplet using a combination of magnetic and electrostatic forces. When an aqueous droplet is placed in an oil-filled reservoir, the droplet sinks to the bottom, under which an electrode had been placed. The droplet was adsorbed (or anchored) to the bottom surface on the electrode when a DC voltage was applied to the electrode. The magnetic beads were removed with magnetic force after the droplet had been anchored. Surfactant addition into droplet solution was very effective for the elimination of electric charge, which resulted in the stable adsorption of a droplet to hydrophobic substrate under an applied voltage of DC 0.5-3 kV. In a sequential process, small volume of aqueous liquid was successfully transferred using both magnetic and electrostatic forces.     

Density functional theory investigation of novel Eu(III) complexes with asymmetric bis(phosphine) oxides

Recently, we have developed novel Eu(III) complexes with three beta-diketonates and one asymmetric bis(phosphine) oxide whose light emission intensity is drastically increased. In this paper, one of these complexes is investigated by the density functional theory calculation. Sixteen isomers of this complex have been considered. The ratio of the existence for the most stable isomer (B1_1a) is found to be about 51%, and the sum of the ratio of the existence for the six most stable isomers (B1_1a, B1_3a, B1_8a, B1_2a, B1_1b, and B1_5a) is about 100%, assuming the Boltzmann distribution (T = 300 K). The coordination structures of the six most stable isomers in the ground states are similar, and we can expect asymmetric ligand fields for them, favorable for the efficient light emission. Vertical excitation energies and oscillator strengths for each isomer have been obtained by the time-dependent density functional theory. With the red-shift of the wavelength and the interpolation by Gaussian convolution, both the calculated absorption spectra for the most stable isomer B1_1a and the calculated absorption spectra for the ensemble average of the isomers are found to be similar to the experimental fluorescence excitation spectra. The efficiency of energy transfer from the triplet excited state to the Eu(III) ion is considered by calculating DeltaEET (difference between the adiabatic excitation energy of the complex for the lowest triplet state and the emission energy of the Eu(III) ion for 5D0 to 7F2). The characters for the lowest triplet states for the isomers are investigated by the spin density distributions of the triplet states.     

Synthesis of the entire carbon framework of the kedarcidin chromophore aglycon

In advanced studies directed toward the total synthesis of the kedarcidin chromophore, we have successfully achieved the late-stage installation of the nine-membered diyne ring in the presence of the highly functionalised ansamacrocyclic bridge.     

"Pocket dendrimers" as nanoscale receptors for bimolecular guest accommodation

A new series of dendrimer receptors was prepared by combining a (tetraphenylporphinato)zinc(II) core and benzyl ether type dendritic substituents. Since one direction of the (tetraphenylporphinato)zinc(II) was not substituted by a dendritic residue, the resulting unsymmetrical dendrimers have "pockets" available for access of external substrates. Molecular modeling, NMR measurements, and zinc-coordination experiments revealed that the third-generation dendrimer of this type exhibited characteristic inclusion of coordinative pyridine guests. When diamidopyridine moiety was introduced into the dendrimer pocket, a thymine derivative was bound through complementary hydrogen bonding. Two different kinds of substrates, pyridine and thymine derivatives, were simultaneously accommodated in the nanoscale pocket and bimolecular guest accommodation was realized with the designed dendrimer receptor.     

Methoxy- and fluorine-substituted analogs of O-1302: synthesis and in vitro binding affinity for the CB1 cannabinoid receptor

Methoxy and fluorine analogs substituted on the terminal carbon of the pentyl chain of N-(piperidinyl)-1-(2,4-dichlorophenyl)-4-methyl-5-(4-pentylphenyl)-1H-pyrazole-3-carboxamide (O-1302) were synthesized in a multi-step process from 5-phenyl-1-pentanol, which was based on the 1,5-diarylpyrazole core template of N-(piperidinyl)-5-(4-chlorophenyl)-1-(2,4-dichlorophenyl)-4-methyl-1H-pyrazole-3-carboxamide (SR141716) through condensation of the respective amine with pyrazole carboxylic acid, in order to develop tracers for medical imaging. Their potency for inhibiting the binding of the CB1 antagonist [(3)H]SR141716 was evaluated with the aim of developing positron emission tomography (PET) ligands for the cerebral cannabinoid CB1 receptor. These analogs bearing a piperidinyl carboxamide at the C(3) of the pyrazole ring exhibited affinities comparable to those of the CB1 reference antagonist SR141716, which warrants further investigation using the radiolabeled form for biological imaging studies. A morpholine ring substituted at the C(3) of the pyrazole ring resulted in a reduction of the CB1 affinity.     

Linear metal-metal-bonded tetranuclear M-Mo-Mo-M complexes (M = Ir and Rh): oxidative metal-metal bond formation in a tetrametallic system and 1,4-addition reaction of alkyl halides

Reaction of Mo2(pyphos)4 (1) with [MCl(CO)2]2 (M = Ir and Rh) afforded linear tetranuclear complexes of a formula Mo2M2(CO)2(Cl)2(pyphos)4 (2, M = Ir; 3, M = Rh). X-ray diffraction studies confirmed that two "MCl(CO)" fragments are introduced into both axial sites of the Mo2 core in 1 and coordinated by two PPh2 groups in a trans fashion, thereby forming a square-planar geometry around each M(I) metal. Treatment of 2 and 3 with an excess amount of tBuNC and XylNC induced dissociation of the carbonyl and chloride ligands to yield the corresponding dicationic complexes [Mo2M2(pyphos)4(tBuNC)4](Cl)2 (5a, M = Ir; 6a, M = Rh) and [Mo2M2(pyphos)4(XylNC)4](Cl)2 (7, M = Ir; 8, M = Rh). Their molecular structures were characterized by spectroscopic data as well as X-ray diffraction studies of BPh4 derivatives [Mo2M2(pyphos)4(tBuNC)4](BPh4)2 (5b, M = Ir; 6c, M = Rh), which confirmed that there is no direct sigma-bonding interaction between the M(I) atom and the Mo2 core. The M(I) atom in 5 and 6 can be oxidized by either 2 equiv of [Cp2Fe][PF6] or an equimolar amount of I2 to afford Mo(II)2M(II)2 complexes, [Mo2M2(X)2(tBuNC)4(pyphos)4]2+ in which two Mo-M(II) single bonds are formed and the bond order of the Mo-Mo moiety has been decreased to three. The Ir(I) complex 5a reacted not only with methyl iodide but also with dichloromethane to afford the 1,4-oxidative addition products [Mo2Ir2(CH3)(I)(tBuNC)4(pyphos)4](Cl)2 (13) and [Mo2Ir2(CH2Cl)(Cl)(tBuNC)4(pyphos)4](Cl)2 (15), respectively, although the corresponding reactions using the Rh(I) analogue 6 did not proceed. Kinetic analysis of the reaction with CH3I suggested that the 1,4-oxidative addition to the Ir(I) complex occurs in an SN2 reaction mechanism.     

Determination of vanillin and related flavor compounds in cocoa drink by capillary electrophoresis

In the first part of this study, the stability of five terpenes (alpha-pinene, limonene, camphor, citronellol, and carvacrol) under subcritical water conditions was investigated. The stability studies were carried out at four different temperatures (100, 150, 200, and 250 degrees C) with two different heating times (30 and 300 min). When water temperature was increased, the degradation of terpenes became more serious. Prolonged exposure time to each heating temperature also caused decreased terpene stability. The terpene recoveries were determined by conducting subcritical water extraction of sand spiked with terpenes. The recoveries are typically around 70 to 80% for extractions at 100 degrees C. Terpene recoveries were decreased with increasing water temperature due to poorer stability of terpenes. After the degradation and recovery studies, basil and oregano leaves were extracted using water at both 100 and 150 degrees C. The concentrations of each individual terpene in the water extract generally ranged from trace quantity to 65 microg terpene/g herb. However, the concentration of carvacrol in the oregano-water extract at 150 degrees C was found to be as high as 4270 microg carvacrol/g oregano.     

Simultaneous determination of amphoteric surfactants in detergents by capillary electrophoresis with indirect UV detection

A simple, rapid and simultaneous determination of four types of amphoteric surfactants, i.e., C8, C10, C12, C14, C16 and C18-homologues of alkyldimethylamine N-oxide (AO), alkylamidopropylamine N-oxide (APAO), alkylbetaine (Bt) and alkylamidopropylbetaine (APB), was performed by using capillary electrophoresis (CE) with indirect UV detection. To optimize the separation conditions, effects of pH of background solution (BGS), organic modifier and chromophore for indirect UV detection on the CE separation of the amphoteric compounds were investigated. Addition of 50% (v/v) acetonitrile to the BGS under a lower pH condition brought a good separation performance due to the suppression of micelle formation for the analytes and the adsorption onto the inner surface of the capillary. Under an optimal condition, the 24 amphoteric analytes were completely separated in a single run within 17min. The relative standard deviation of the migration time was ranging from 0.20 to 0.23% and the limit of detection values for AO, APAO, Bt and APB homologues were 10-20, 20, 20-50 and 50microg/mL, respectively. Furthermore, the developed method can provide a high resolution separation of the amphoteric surfactants in commercially available detergents and shampoo without any sample pretreatments.     

Rotational spectrum of the Ar–dimethyl sulfide complex

The rotational spectra of three isotopomers of the Ar–dimethyl sulfide (DMS) complex – normal, ³⁴S, and ¹³C species – were measured in the frequency region from 3.7 up to 24.1 GHz by Fourier transform microwave spectroscopy. The normal species yielded 43 a-type and 79 c-type transitions. No Ar tunneling splitting was observed, while many transitions were split by the internal rotation of the two methyl tops of the DMS unit. In cases where the K-type splitting was close to that due to methyl internal-rotation, several forbidden transitions were observed that followed b-type selection rules. All of the observed transition frequencies were analyzed simultaneously using a phenomenological Hamiltonian also used in previously published work describing the Ar–dimethyl ether (DME) and Ne–DME complexes. The rotational and centrifugal distortion constants and the potential barrier height to methyl-top internal rotation, V₃, were determined. The rotational constants were consistent with an Ar–DMS center of mass (cm) distance of 3.796 (3) Å and a S–cm–Ar angle of 104.8 (2)°. The V₃ potential barrier obtained, 736.17 (32) cm⁻¹, was 97.8% of the DMS monomer barrier. By assuming a Lennard–Jones-type potential, the dissociation energy was estimated to be 2.4 kJ mol⁻¹, which was close to the value for Ar–DME, 2.5 kJ mol⁻¹.